Synfluid® mPAO 150 cSt

If unconscious, place in recovery position and seek medical advice. If symptoms persist, call a physician.

Wash off with soap and water. Wash contaminated clothing before re-use.

Flush eyes with water as a precaution. Remove contact lenses. Protect unharmed eye. Keep eye wide open while rinsing. If eye irritation persists, consult a specialist.

Keep respiratory tract clear. Do not give milk or alcoholic beverages. Never give anything by mouth to an unconscious person. If symptoms persist, call a physician.

Use extinguishing measures that are appropriate to local circumstances and the surrounding environment.

High volume water jet.

Exposure to decomposition products may be a hazard to health.

Standard procedure for chemical fires.

Clean contaminated floors and objects thoroughly while observing environmental regulations.

Wipe up with absorbent material (e.g. cloth, fleece).

Materials: cloth, fleece

For personal protection see section 8. Smoking, eating and drinking should be prohibited in the application area. Dispose of rinse water in accordance with local and national regulations.

Keep container tightly closed in a dry and well-ventilated place.

Smoking, eating and drinking should be prohibited in the application area.

Normal measures for preventive fire protection.

Adequate ventilation to control airborne concentrations below the exposure guidelines/limits. Consider the potential hazards of this material (see Section 2), applicable exposure limits, job activities, and other substances in the work place when designing engineering controls and selecting personal protective equipment. If engineering controls or work practices are not adequate to prevent exposure to harmful levels of this material, the personal protective equipment listed below is recommended. The user should read and understand all instructions and limitations supplied with the equipment since protection is usually provided for a limited time or under certain circumstances.

The suitability for a specific workplace should be discussed with the producers of the protective gloves. Please observe the instructions regarding permeability and breakthrough time which are provided by the supplier of the gloves. Also take into consideration the specific local conditions under which the product is used, such as the danger of cuts, abrasion, and the contact time. Gloves should be discarded and replaced if there is any indication of degradation or chemical breakthrough.

Eye wash bottle with pure water. Tightly fitting safety goggles.

If ventilation or other engineering controls are not adequate to maintain minimal oxygen content of 19.5% by volume under normal atmospheric pressure, a supplied-air NIOSH approved respirator may be appropriate.

Choose body protection according to the amount and concentration of the substance and the task performed at the work place. Appropriate PPE may include:. Lightweight protective clothing.

Stable at normal ambient temperature and pressure.

No decomposition if stored and applied as directed.

No data available.

No data available.

No data available

Use material for its intended purpose or recycle if possible.

Do not dispose of waste into sewer. Do not contaminate ponds, waterways or ditches with chemical or used container. Send to a licensed waste management company.