NextSDS Logo
Safety Data Sheet EN

TERROX

Keep this SDS organized and up to date

Add this SDS to your NextSDS library and keep all its safety information in one place.

Add to my SDS library for free
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
TERROX
Product Form
Liquid
Chemical Name
Higher Alcohol Mix C3-C6

Regulatory Identifiers

CAS Number
N/A

Identified Uses

Fuel Octane Improver

Uses advised against

No additional information available

Manufacturers & Suppliers

T

Terra Mater BV

manufacturer

Skaldenstraat 121/B2, 9042 Gent, Belgium

+32 935 57 363

Emergency Contacts

Emergency Contact

+55 (11) 4798-7500

Anti-poison centre

+32 70 245 245

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified danger

Hazard Classifications

Flam. Liq. Cat. 3 H226
Acute Tox. Cat. 4 H332
Skin Irrit. Cat. 2 H315
Eye Dam. Cat. 1 H318
STOT SE Cat. 3 H335

GHS Pictograms

GHS02 - Flammable

GHS02

GHS05 - Corrosive

GHS05

GHS07 - Health hazard

GHS07

Hazard Statements

H226 Flammable liquid and vapour.
H315 Causes skin irritation.
H318 Causes serious eye damage.
H332 Harmful if inhaled.
H335 May cause respiratory irritation.

Precautionary Statements

P210 Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
P261 Avoid breathing spray, vapours, mist.
P264 Wash hands thoroughly after handling.
P280 Wear eye protection, protective gloves, protective clothing.
P305 + P351 + P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P310 Immediately call a POISON CENTER, a doctor.

Still copying SDS data manually?Free

You don't have to. NextSDS reads this SDS and adds the information to your library automatically.

Let NextSDS do it for me
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type mixture

Mix of primary alcohols; May contain minority primary alcohols from C3- to C6-

Chemical Name CAS Number Concentration Hazardous
2-methyl-1-propanol 78-83-1 25 - 60% Yes
3-methyl-1-butanol 123-51-3 25 - 60% Yes
04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

Remove person to fresh air and keep comfortable breathing. Get medical advice/attention

Symptoms: May cause respiratory irritation.

Skin contact

Rinse skin with water/shower. Take off immediately all contaminated clothing. If skin irritation occurs: Get medical advice/attention

Symptoms: Irritation.

Eye contact

Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Call a physician immediately.

Symptoms: Serious damage to eyes

Ingestion

Do not induce vomiting. Vomiting: prevent asphyxia/aspiration pneumonia. Call a physician immediately

Immediate Medical Attention

Call a physician immediately for eye contact and ingestion. Get medical advice/attention for inhalation or if skin irritation occurs.

Medical Treatment

Treat according to symptoms.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

Water spray. Dry powder. Alcohol resistant Foam. Carbon dioxide

Unsuitable media

Higher power water jet

Specific hazards

Flammable liquid and vapour. The vapours are denser than air and may travel along the ground. Distance ignition possible.

Firefighter Protection

Do not attempt to take action without suitable protective equipment. Self-contained breathing apparatus. Complete protective clothing.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Emergency procedures

Ventilate spillage area. No open flames, no sparks, and no smoking. Avoid breathing mist, vapours, spray. Avoid contact with skin and eyes.

Small spill

Small quantities of liquid spill: take up in non-combustible absorbent material and shovel into proper container for disposal.

Environmental

Avoid sub-soil penetration. Prevent entry to sewers and public waters.

Cleanup methods

take up in non-combustible absorbent material and shovel into proper container for disposal

Materials: non-combustible absorbent material

—

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. Ground/bond container and receiving equipment. Use only non-sparking tools. Take precautionary measures against static discharge. Flammable vapours may accumulate in the container. Use explosion-proof equipment. Wear personal protective equipment. Use only outdoors or in a well-ventilated area. Avoid breathing mist, vapours, spray. Avoid contact with skin and eyes.

Storage

Store in a well-ventilated place. Keep cool. Keep container tightly closed

Hygiene

Wash contaminated clothing before reuse. Do not eat, drink or smoke when using this product. Always wash hands after handling the product.

Fire prevention

Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. Ground/bond container and receiving equipment. Use only non-sparking tools. Take precautionary measures against static discharge.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

Engineering

Ensure good ventilation of the work station.

Hands

Chemical resistant protective gloves. ISO 374-1. Choosing the proper glove is a decision that depends not only on the type of material, but also on other quality features, which differ for each manufacturer. Please follow the instructions related to the permeability and the penetration time provided by the manufacturer. Gloves must be replaced after each use and whenever signs of wear and perforation appear.

Eyes

Wear closed safety glasses. ISO 16321-1.

Respiratory

In case of insufficient ventilation, wear suitable respiratory equipment. EN 14387. Filter type: A-P2

Skin/Body

Wear suitable protective clothing. EN 340. EN 13034

Environmental

Avoid release to the environment

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Physical State
Liquid
Physical State Data
liquid
State Under Standard Conditions
---
Appearance
---
Colour
~25 (Pt/Co) (ASTM D 1209)
Colour Intensity
---
Form
---
Odor
Typical Oxygenated Hydrocarbon Odour
Odor Threshold
---
Ph
Not available
Melting Point
Not available
Boiling Point
105 °C – 135 °C (Approx.)
Flash Point
35.5 °C (IP 170)
Freezing Point
Not available
Softening Point
---
Solidification Point
---
Cloud Point
< -60°C (ASTM D2500)
Crystallisation Point
---
Relative Evaporation Rate
---
Evaporation Rate
---
Vapor Pressure
Not available
Vapor Density
---
Relative Density
0.81
Bulk Density
---
Density
0.811 g/cm³ (@20 °C) (ASTM D 4052)
Flammability
Flammable
Upper Explosive Limit
Not available
Lower Explosive Limit
Not available
Explosive Limits
---
Auto Ignition Temperature
Not available
Decomposition Temperature
Not available
Solubility
Not available
Partition Coefficient
---
Solubility In Water
---
Solubility In Fat
---
Molecular Weight
---
Voc Content
---
Metal Corrosion
---
Dynamic Viscosity
Not available
Kinematic Viscosity
2.669 mm²/s (ASTM D445)
Properties Status
---
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Stability

Stable under normal conditions of storage.

Reactivity

Flammable liquid and vapour.

Hazardous reactions

No dangerous reactions known under normal conditions of use.

Avoid

Avoid contact with hot surfaces. Heat. No flames, no sparks. Eliminate all sources of ignition.

Incompatible

Strong oxidizing agents.

Decomposition

Under normal conditions of storage and use, hazardous decomposition products should not be produced.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

12.3 Bio-accumulative potential

No data available

12.4 Mobility in soil

No data available

12.5 Results of PBT and vPvB assessment

No data available

12.1 Toxicity

12.2 Persistence and degradability

12.3 Bioaccumulative potential

12.4 Mobility in soil

12.5 Results of PBT and vPvB assessment

12.6 Endocrine disrupting properties

No data available

12.7 Other adverse effects

No data available

12.1 Toxicity

No data available

12.2 Persistence and degradability

No data available
13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

Treatment

Disposal must be done according to official regulations.

Disposal

Do not dispose of with domestic waste.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

UN Number
1987
Shipping Name
ALCOHOLS, N.O.S. (Isobutanol/Isoamyl Alcohol)
Transport Class
3
Packing Group
III
15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

No data available

Chemical Safety Assessment Not performed
?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for TERROX?

The signal word is danger.

What is the physical form of TERROX?

TERROX is a liquid with ~25 (pt/co) (astm d 1209) color. It has typical oxygenated hydrocarbon odour odor.

What is the solubility of TERROX?

Not available

What is TERROX used for?

Fuel Octane Improver

What are the hazard statements for TERROX?

This substance has 5 hazard statements:

  • H226: Flammable liquid and vapour.
  • H315: Causes skin irritation.
  • H318: Causes serious eye damage.
  • H332: Harmful if inhaled.
  • H335: May cause respiratory irritation.

What is the melting point of TERROX?

The melting point is Not available and the boiling point is 105 °C – 135 °C (Approx.).