Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- PRETIOX
- Product Form
- pigment form
- Chemical Name
- PRETIOX
Regulatory Identifiers
- CAS Number
- 13463-67-7 Check regulations →
- EC Number
- 236-675-5 Check regulations →
- REACH No.
- 01-2119489379-17-XXXX
Identified Uses
Pigment typy: AV01FG, AV01PhG, AV01Z, AV01SF, FS, R200C, R200F, R200H, R200M, R200P, RG18P, RGLP2, RGU, RGX, RGZW
Uses advised against
No
Manufacturers & Suppliers
PRECHEZA a.s.
manufacturer
nábř. Dr. Edvarda Beneše 1170, 75002, Přerov
Emergency Contacts
National Poisons Information Service (NPIS)
+44 121 507 4123
National Poisons Information Service (NPIS)
844 892 0111
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
GHS Pictograms
Still copying SDS data manually?Free
You don't have to. NextSDS reads this SDS and adds the information to your library automatically.
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Titanium dioxide EC: 236-675-5 | 13463-67-7 | 100% | No |
First Aid Measures
Emergency procedures for chemical exposure incidents
Remove the affected person to fresh air and keep him calm in a position that facilitates breathing, do not let him walk. Secure him against the cold, loosen his tight clothing, collar, tie or belt. Rinse his mouth and nose with water.
Wash the affected area with soap and water. Remove all contaminated clothing and wash before reuse.
Flush the affected eye with a stream of running water. Open the eyelids and if the affected person has contact lenses, remove them. Rinse for at least 10 minutes from the inner corner of the eye to the outer.
Do not induce vomiting. Rinse the victim's mouth with water and have him drink 2 to 3 dL of water. If the victim is unconscious, do not give anything by mouth.
Symptoms: No adverse health effects are expected.
Immediate Medical Attention
Not known based on available data.
Medical Treatment
Not known based on available data.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Shower/water spray, foam, powder, CO2.
They are not known based on available data.
Based on the available data, it is not known.
Firefighter Protection
Use appropriate personal protective equipment, see SECTION 8.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
No special measures or training are required. Prevent unauthorized access. There is a risk of slipping on spilled wet material.
Seal the leak site and prevent the substance from leaking into the surrounding environment, soil, waterways and sewers with suitable absorbent material (sand, gravel).
See SECTION 13
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Observe hygienic requirements for handling chemical substances and mixtures. Do not eat, drink, smoke or chew in the workplace. Remove contaminated clothing appropriately and wash before reuse. Wash your hands after work. Remove contaminated clothing and personal protective equipment before entering the dining area. Operating personnel must be competent by education and training.
Do not store outdoors, exposed to weather. Avoid getting wet.
Observe hygienic requirements for handling chemical substances and mixtures. Do not eat, drink, smoke or chew in the workplace. Remove contaminated clothing appropriately and wash before reuse. Wash your hands after work. Remove contaminated clothing and personal protective equipment before entering the dining area.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Depending on local regulations, an assessment of the effectiveness of ventilation or other measures and/or the use of personal respiratory protective equipment may be required.
Use protective gloves and protective clothing.
Wear appropriate safety glasses or a face shield.
In case of increased dust formation, use a respirator or a half-mask with a B/P2 filter.
Use protective gloves and protective clothing.
Avoid release to the environment. Monitor emissions from ventilation and operating equipment to ensure compliance with environmental protection requirements. In some cases, it may be necessary to use washing machines, filters or other modifications of technical equipment to reduce emissions to the permissible limit.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Based on available data, the substance is stable under normal conditions.
Based on the available data, there are no known hazards arising from the reactivity of the substance in case of recommended storage and use.
Not known based on available data.
Getting wet.
They are not known based on available data.
They are not known based on available data.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
12.1 Toxicity
The product does not meet the criteria for classification.
12.1 Toxicity
12.2 Persistence and degradability
Based on available data, the substance is not considered to be persistent and degradable. No data are available for biotic degradation.
12.3 Bioaccumulative potential
Based on available data, the substance is not considered to be bioaccumulative. No data are available for log Kow or bioaccumulation.
12.1 Toxicity
12.2 Persistence and degradability
12.3 Bioaccumulative potential
12.4 Mobility in soil
The substance is not considered to be mobile in soil.
12.5 Results of PBT and vPvB assessment
12.6 Endocrine disrupting properties
12.7 Other adverse effects
12.5 Results of PBT and vPvB assessment
The substance is not classified as PBT or vPvB.
12.6 Endocrine disrupting properties
The substance does not have endocrine disrupting properties with respect to non-target organisms in accordance with the criteria set out in Regulations (EU) 2017/2100 or (EU) 2018/605. This product does not contain endocrine disruptors in a concentration of 0.1% by weight or higher.
12.7 Other adverse effects
The substance does not meet the criteria for PMT (persistent, mobile and toxic) or vPvM (very persistent and very mobile).
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Check for possible re-use. Package, label and dispose or recycle in accordance with national and local regulations. In the case of larger volumes, consult the manufacturer for disposal.
Check for possible re-use. Package, label and dispose or recycle in accordance with national and local regulations. In the case of larger volumes, consult the manufacturer for disposal.
Waste Codes
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
Based on available information, there are no known Union safety, health and environmental provisions that apply to the substance listed in this safety data sheet. There is no legal obligation to provide a safety data sheet for the given substance.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for PRETIOX?
The signal word is no signal word.
What is the physical form of PRETIOX?
PRETIOX is a solid substance with white color. It has not known based on available data odor.
What is the solubility of PRETIOX?
in water at 20 °C <1 μg/l in the pH range 6 to 8
What is PRETIOX used for?
Pigment typy: AV01FG, AV01PhG, AV01Z, AV01SF, FS, R200C, R200F, R200H, R200M, R200P, RG18P, RGLP2, RGU, RGX, RGZW
What is the melting point of PRETIOX?
The melting point is >1560 °C and the boiling point is 3000 °C.