Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Mercedes-Benz Genuine Engine Oil SAE 5W-30 MB 229.52
- Product Code
- A 000 989 82 07 19 FBDK
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Lubricant
Uses advised against
This product should not be used for other purposes than those specified without the advice of an expert.
Manufacturers & Suppliers
Mercedes-Benz AG
manufacturer
70546 Stuttgart, Germany
+49 711 17-97390
Mercedes-Benz AG
manufacturer
70546 Stuttgart, Germany
+49 711 17-0
Emergency Contacts
Emergency Contact
+49 711 17-0
Giftnotruf der Charité – Universitätsmedizin Berlin
+49 (0)30 30686700
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
GHS Pictograms
Precautionary Statements
Still copying SDS data manually?Free
You don't have to. NextSDS reads this SDS and adds the information to your library automatically.
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
Highly refined mineral oil with additives.
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Lubricating oils (petroleum), C20-50, hydrotreated neutral oil-based EC: 276-738-4 | 72623-87-1 | 20 - 50% | Yes |
| polyolefine poylamine succinimide | --- | 1 - 5% | Yes |
| Calcium long chain alkaryl sulfonate | --- | 0.1 - 1% | Yes |
Notes
The highly refined mineral oil contains <3% (w/w) DMSO-extract, according to IP346.
First Aid Measures
Emergency procedures for chemical exposure incidents
Provide fresh air.
After contact with skin, wash immediately with plenty of water and soap.
Symptoms: May cause irritation of the skin.
In case of contact with eyes flush immediately with plenty of flowing water for 10 to 15 minutes holding eyelids apart. Remove contact lens.
Symptoms: May cause irritation of the eyes.
Do NOT induce vomiting.
Immediate Medical Attention
In the event of symptoms refer for medical treatment. In case of skin irritation, consult a physician. Consult an ophthalmologist. Call a physician immediately.
Medical Treatment
Treat symptomatically.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
alcohol resistant foam, Extinguishing powder, Carbon dioxide (CO2), Water spray jet
Full water jet
In case of fire formation of dangerous gases possible.
Co-ordinate fire-fighting measures to the fire surroundings. Cool endangered containers with water spray and possibly remove them from fire site.
Firefighter Protection
Wear self-contained breathing apparatus.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Avoid skin and eye contact. Use personal protection equipment. Special danger of slipping by leaking/spilling product.
Do not allow to enter into surface water or drains. Do not allow to enter into soil/subsoil. Prevent spread over a wide area (e.g. by containment or oil barriers).
Collect with spongy material (all-purpose gelation agent)
Materials: spongy material (all-purpose gelation agent)
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Avoid generation/formation of aerosols. Do not heat up to temperatures close to the flash point. All work processes must always be designed so that skin contact is as low as possible. Avoid eye contact. Do not put any product-impregnated cleaning rags into your trouser pockets.
Keep container tightly closed and protected against effects of weather in a cool, appropriately aerated area.
Thorough skin-cleansing after handling the product. Apply skin care products after work. When using do not eat, drink, smoke, sniff. Keep away from food and drink. Use protective skin cream before handling the product.
Do not heat up to temperatures close to the flash point.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Sufficient ventilation and exhaustion.
Glove materials data [type, thickness, breakthrough time/duration of use, permeation rate]: Nitrile rubber (protection index 6, >480 min, 0.4 mm). For special purposes, it is recommended to check the resistance to chemicals of the protective gloves mentioned above together with the supplier of these gloves. The protective gloves to be used must comply with the specifications of EC directive 89/686/EEC and. the resultant standard EN374.
Safety glasses recommended during transfer, EN 166
Respiratory protection necessary at: insufficient exhaust, prolonged exposure. Suitable respiratory protection apparatus: Filtering device (full mask or mouthpiece) with filter: AX
Protective clothing
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
The product is chemically stable under recommended conditions of storage, use and temperature.
No hazardous reactions known.
No hazardous reactions known.
Heat, High temperatures, Avoid temperatures above flash point.
Oxidising agent, strong, Strong acids, Strong bases
No decomposition products will result from proper storage and handling.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
12.1 Toxicity
12.1 Toxicity
12.1 Toxicity
12.2 Persistence and degradability
12.3 Bioaccumulative potential
12.4 Mobility in soil
12.5 Results of PBT and vPvB assessment
The substances in the mixture do not meet the PBT/vPvB criteria according to REACH, annex XIII.
12.6 Endocrine disrupting properties
No data available
12.7 Other adverse effects
Product is not allowed to be discharged into the ground water or aquatic environment.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Dispose of waste according to applicable legislation.
Dispose of waste according to applicable legislation.
Waste Codes
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Mercedes-Benz Genuine Engine Oil SAE 5W-30 MB 229.52?
The signal word is no signal word.
What is the physical form of Mercedes-Benz Genuine Engine Oil SAE 5W-30 MB 229.52?
Mercedes-Benz Genuine Engine Oil SAE 5W-30 MB 229.52 is a liquid with brown color. It has characteristic odor.
What is Mercedes-Benz Genuine Engine Oil SAE 5W-30 MB 229.52 used for?
Lubricant
What is the melting point of Mercedes-Benz Genuine Engine Oil SAE 5W-30 MB 229.52?
The melting point is not determined and the boiling point is not determined.