Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- SIPMET 9
- Product Code
- SMET9
Regulatory Identifiers
- CAS Number
- 64742-55-8 Check regulations →
- EC Number
- 265-158-7 Check regulations →
- REACH No.
- 01-2119487077-29-XXXX
Identified Uses
Manufacture of substance - Industrial Use in Cleaning Agents - Consumer Metal working fluids/rolling oils - Industrial Metal working fluids/rolling oils - Professional Use as binders and release agents - Industrial Use as binders and release agents - Professional Use in Agrochemicals uses - Professional Use in Agrochemicals uses - Consumer Rubber production and processing - Industrial Polymer processing - Industrial Use as an intermediate - Industrial Lubricants - Industrial Lubricants (Low release) - Professional Lubricants (high release) - Professional Lubricants (Low release) - Consumer Lubricants (high release) - Consumer Use in laboratories - Industrial Use in laboratories - Professional Water treatment chemicals - Industrial Water treatment chemicals - Professional Explosives manufacture and use - Professional Distribution of substance - Industrial Functional Fluids - Industrial Functional Fluids - Professional Other Consumer Uses - Consumer Formulation and (re)packing of substances and mixtures - Industrial Uses in Coatings - Industrial
Manufacturers & Suppliers
SIP Oils and Fluids Europe BV
manufacturer
Lierseteenweg 400, 2800 Mechelen, Belgium
Emergency Contacts
Emergency Contact
+44 207 7170100
during office opening hours (9am - 4pm)
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS08
Hazard Statements
Precautionary Statements
Still copying SDS data manually?Free
You don't have to. NextSDS reads this SDS and adds the information to your library automatically.
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Distillates (petroleum), hydrotreated light paraffinic EC: 265-158-7 | 64742-55-8 | --- | No |
First Aid Measures
Emergency procedures for chemical exposure incidents
Generally the product does not irritate the skin.
Rinse opened eye for several minutes under running water.
If symptoms persist consult doctor.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Use fire extinguishing methods suitable to surrounding conditions.
No further relevant information available.
Firefighter Protection
No special measures required.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Not required.
Do not allow to enter sewers/ surface or ground water.
Absorb with liquid-binding material (sand, diatomite, acid binders, universal binders, sawdust).
Materials: sand, diatomite, acid binders, universal binders, sawdust
Related Products
Similar products with comparable safety profiles
SIPMET 2, SIPMET 4, SIPMET 7, SIPMET 9, SIPMET 9R, SIPMET 12
CAS: 64742-47-8, 64742-55-8, 8042-47-5
SIPMED 12
CAS: 64742-55-8
SIPMED 35
---
SIPMED 68
CAS: 8042-47-5
SIPMED 68
---
SIPMED 4, SIPMED 6, SIPMED 8 USP, SIPMED 10
CAS: 64742-47-8, 64742-55-8, 8042-47-5
SIPMED 20R
CAS: 64742-54-7
SIPTECH 12
CAS: 64742-55-8
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
No special precautions are necessary if used correctly.
Keep container tightly sealed.
No special measures required.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
No further data; see item 7.
The glove material has to be impermeable and resistant to the product/ the substance/ the preparation. Due to missing tests no recommendation to the glove material can be given for the product/ the preparation/ the chemical mixture. Selection of the glove material on consideration of the penetration times, rates of diffusion and the degradation. The selection of the suitable gloves does not only depend on the material, but also on further marks of quality and varies from manufacturer to manufacturer. The exact break through time has to be found out by the manufacturer of the protective gloves and has to be observed.
Goggles recommended during refilling
Not required.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
No decomposition if used according to specifications.
No further relevant information available.
No dangerous reactions known.
No further relevant information available.
No further relevant information available.
No dangerous decomposition products known.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
Toxicity
Persistence and degradability
Bioaccumulative potential
Mobility in soil
Results of PBT and vPvB assessment
Endocrine disrupting properties
Other adverse effects
12.1 Toxicity
Persistence and degradability
12.3 Bioaccumulative potential
12.4 Mobility in soil
12.5 Results of PBT and vPvB assessment
12.6 Endocrine disrupting properties
12.7 Other adverse effects
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Must not be disposed together with household garbage. Do not allow product to reach sewage system.
Must not be disposed together with household garbage.
Waste Codes
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
Safety, health and environmental regulations/legislation specific for the substance or mixture: (Substances not listed)
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for SIPMET 9?
The signal word is danger.
What is the physical form of SIPMET 9?
SIPMET 9 is a liquid appearing as clear with clear color. It has characteristic odor.
What is SIPMET 9 used for?
Manufacture of substance - Industrial Use in Cleaning Agents - Consumer Metal working fluids/rolling oils - Industrial Metal working fluids/rolling oils - Professional Use as binders and release agents - Industrial Use as binders and release agents - Professional Use in Agrochemicals uses - Professional Use in Agrochemicals uses - Consumer Rubber production and processing - Industrial Polymer processing - Industrial Use as an intermediate - Industrial Lubricants - Industrial Lubricants (Low release) - Professional Lubricants (high release) - Professional Lubricants (Low release) - Consumer Lubricants (high release) - Consumer Use in laboratories - Industrial Use in laboratories - Professional Water treatment chemicals - Industrial Water treatment chemicals - Professional Explosives manufacture and use - Professional Distribution of substance - Industrial Functional Fluids - Industrial Functional Fluids - Professional Other Consumer Uses - Consumer Formulation and (re)packing of substances and mixtures - Industrial Uses in Coatings - Industrial
What are the hazard statements for SIPMET 9?
This substance has 1 hazard statement:
- H304: May be fatal if swallowed and enters airways.
What is the melting point of SIPMET 9?
The melting point is Undetermined. and the boiling point is 290-450 °C.