Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Infineum C9310
- Product Code
- 32774
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Component of lubricant additives
Uses advised against
This material should not be used for any other purpose than that recommended without expert advice.
Manufacturers & Suppliers
INFINEUM ITALIA S.R.L.
manufacturer
Strada di Scorrimento 2 17047 Vado Ligure (SV) – Italy
+39 019 2150 1
http://www.infineum.com
INFINEUM NETHERLANDS B.V.
manufacturer
Herikerbergweg 238 Luna Arena 1101 CM Amsterdam The Netherlands
+44 1235 549501
http://www.infineum.com
Emergency Contacts
Emergency Contact
04-4274.4690
Emergency Contact
+33-4.4274.4690
Emergency Contact
0221-7499 3355
Emergency Contact
+49-221-7499 3355
Emergency Contact
019-2150 221
Emergency Contact
+39 019-2150 221
Emergency Contact
01235 549777
Emergency Contact
+44 1235 549777
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
Hazard Statements
Precautionary Statements
Still copying SDS data manually?Free
You don't have to. NextSDS reads this SDS and adds the information to your library automatically.
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Benzenesulfonic acid, mono-C16-102-branched alkyl derivs | --- | 90 - 100% | Yes |
| Long chain alkaryl hydrocarbon | --- | 10 - 20% | Yes |
| distillates (petroleum), solvent-refined light paraffinic EC: 265-091-3 | --- | 1 - 10% | Yes |
| distillates (petroleum), hydrotreated heavy paraffinic EC: 265-157-1 | --- | 1 - 10% | Yes |
| Distillates (petroleum), solvent-dewaxed heavy paraffinic EC: 265-169-7 | --- | 1 - 10% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
If unconscious, place in recovery position and seek medical advice. If symptoms persist, call a physician.
Take off contaminated clothing and shoes immediately. Wash off with soap and plenty of water. If symptoms persist, call a physician. In case of burns apply cold water until pain subsides then seek medical advice.
Flush eyes with water as a precaution. Remove contact lenses. Protect unharmed eye. Keep eye wide open while rinsing. If eye irritation persists: Get medical advice/ attention.
Clean mouth with water and drink afterwards plenty of water. Never give anything by mouth to an unconscious person. If symptoms persist, call a physician.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Use water fog, foam, dry chemical or carbon dioxide (CO2) to extinguish flames
Do NOT use water jet.
Not classified as flammable or combustible, but will combust if ignited.
Collect contaminated fire extinguishing water separately. This must not be discharged into drains. Fire residues and contaminated fire extinguishing water must be disposed of in accordance with local regulations.
Firefighter Protection
In the event of fire, wear self-contained breathing apparatus.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Avoid contact with spilled material. Do not touch or walk through spilled material.
Wipe up with absorbent material (e.g. cloth, fleece).
Large Spills: Dyke far ahead of liquid spill for later recovery and disposal. Recover by pumping or with suitable absorbent
Prevent entry into waterways, sewers, basements or confined areas. Do not flush into surface water or sanitary sewer system. Prevent further leakage or spillage if safe to do so. Try to prevent the material from entering drains or water courses.
Prevent further leakage or spillage if safe to do so. Recover by pumping or with suitable absorbent. Wipe up with absorbent material (e.g. cloth, fleece).
Materials: absorbent material (e.g. cloth, fleece)
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Smoking, eating and drinking should be prohibited in the application area. Ensure work area is adequately ventilated when handling containers. Caution must be exercised when heating this product. Do not heat above the maximum loading/unloading temperature to minimise possible release of toxic hydrogen sulfide.
Hydrogen sulfide may be found in the head space of containers if this product is heated or stored.
Smoking, eating and drinking should be prohibited in the application area.
Normal measures for preventive fire protection.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
No special requirements under ordinary conditions of use and with adequate ventilation.
Polyvinyl alcohol or nitrile- butyl-rubber gloves Before removing gloves clean them with soap and water. Please observe the instructions regarding permeability and breakthrough time which are provided by the supplier of the gloves. Also take into consideration the specific local conditions under which the product is used, such as the danger of cuts, abrasion, and the contact time. When handling hot material, use heat resistant gloves. The selected protective gloves have to satisfy the specifications of Regulation (EU) 2016/425 and the standard EN 374 derived from it.
Safety glasses The applicable European standard can be found in EN 166.
No personal respiratory protective equipment normally required. The applicable European standard can be found in EN 140, EN 137, EN 143, EN 14387.
Long sleeved clothing The applicable European standard can be found in EN 14605.
Prevent entry into waterways, sewers, basements or confined areas. Do not flush into surface water or sanitary sewer system. Prevent further leakage or spillage if safe to do so. Try to prevent the material from entering drains or water courses. If the product contaminates rivers and lakes or drains inform respective authorities.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under recommended storage conditions.
No dangerous reaction known under conditions of normal use.
No hazards to be specially mentioned.
Excessive heat.
Strong oxidizing agents
Hydrogen Sulfide. No decomposition if used as directed.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
12.1 Toxicity
12.1 Toxicity
12.2 Persistence and degradability
12.3 Bioaccumulative potential
12.4 Mobility in soil
12.5 Results of PBT and vPvB assessment
The product and its components (Benzenesulfonic acid, mono-C16-102-branched alkyl derivs; Long chain alkaryl hydrocarbon; distillates (petroleum), solvent-refined light paraffinic; distillates (petroleum), hydrotreated heavy paraffinic; Distillates (petroleum), solvent-dewaxed heavy paraffinic) are assessed as not being PBT or vPvB.
12.6 Endocrine Disrupting Properties
No data is available on the product itself regarding endocrine disrupting properties.
12.7 Other adverse effects
The substance/mixture does not contain components considered to have endocrine disrupting properties according to REACH Article 57(f) or Commission Delegated regulation (EU) 2017/2100 or Commission Regulation (EU) 2018/605 at levels of 0.1% or higher.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Dispose of contents/ container to an approved waste disposal plant.
The product should not be allowed to enter drains, water courses or the soil. Do not contaminate ponds, waterways or ditches with chemical or used container. Disposal must be in accordance with applicable laws and regulations, and material characteristics at time of disposal.
Waste Codes
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Infineum C9310?
The signal word is no signal word.
What is the physical form of Infineum C9310?
Infineum C9310 is a liquid with brown color. It has strong odor.
What is Infineum C9310 used for?
Component of lubricant additives
What are the hazard statements for Infineum C9310?
This substance has 1 hazard statement:
- H413: May cause long lasting harmful effects to aquatic life.
What is the melting point of Infineum C9310?
The melting point is not determined and the boiling point is not determined.