Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Indikator H25-3
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
laboratory and analytical use
Manufacturers & Suppliers
RLS Wacon analytics GmbH
manufacturer
Gropiusstr. 12, 31137 Hildesheim, Germany
+49 (0) 51 21 28 126 0
https://www.rls-wacon.de/
Emergency Contacts
Emergency Contact
+49 (0) 551 19240
Mon - Sun 12:00 AM - 11:59 PM
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS07
Hazard Statements
Precautionary Statements
Still copying SDS data manually?Free
You don't have to. NextSDS reads this SDS and adds the information to your library automatically.
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
First Aid Measures
Emergency procedures for chemical exposure incidents
If breathing is irregular or stopped, immediately seek medical assistance and start first aid actions. Provide fresh air.
Take off immediately all contaminated clothing. Wash with plenty of soap and water.
Remove contact lenses, if present and easy to do. Continue rinsing. Irrigate copiously with clean, fresh water for at least 10 minutes, holding the eyelids apart.
Rinse mouth with water (only if the person is conscious). Do NOT induce vomiting.
Immediate Medical Attention
In all cases of doubt, or when symptoms persist, seek medical advice. If breathing is irregular or stopped, immediately seek medical assistance.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Water spray, Alcohol resistant foam, BC-powder, Carbon dioxide (CO2)
Water jet
Hazardous combustion products: Nitrogen oxides (NOx), Carbon monoxide (CO), Carbon dioxide (CO2)
Co-ordinate firefighting measures to the fire surroundings. Fight fire with normal precautions from a reasonable distance.
Firefighter Protection
In case of fire and/or explosion do not breathe fumes.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
For non-emergency personnel: Remove persons to safety. For emergency responders: Wear breathing apparatus if exposed to vapours/dust/spray/gases.
Keep away from drains, surface and ground water. Retain contaminated washing water and dispose of it.
Wipe up with absorbent material (e.g. cloth, fleece). Collect spillage: sawdust, kieselgur (diatomite), sand, universal binder
Materials: cloth, fleece, sawdust, kieselgur (diatomite), sand, universal binder
Related Products
Similar products with comparable safety profiles
Reagent H25-0,02 / H25-0,05 / H25-0,1 / H25-0,2 / H25-0,3 / H25-0,5
---
Testomat-Indikator Typ 303
---
Testomat 2000 Indikator TH 2025
---
INDOPOL® H-25, H-25 SR, H-50, H-100, H-100 CP, H-300, H-300 C, H-300 CP, H-1200, H1200 CP
---
INDOPOL® H-25, H-25 SR, H-50, H-100, H-100 CP, H-300, H-300 C, H-300 CP, H-1200, H1200 CP
CAS: 9003-29-6, 9044-17-1
TEMP-ALERT INDICATOR/CLEAR
---
Sikadur®-31+ Part A
---
Berulit 75
---
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Use local and general ventilation. Use only in well-ventilated areas. Wash hands after use. Do not eat, drink and smoke in work areas. Remove contaminated clothing and protective equipment before entering eating areas. Never keep food or drink in the vicinity of chemicals. Never place chemicals in containers that are normally used for food or drink. Keep away from food, drink and animal feedingstuffs.
Protect against external exposure, such as frost
Wash hands after use. Do not eat, drink and smoke in work areas. Remove contaminated clothing and protective equipment before entering eating areas. Never keep food or drink in the vicinity of chemicals. Never place chemicals in containers that are normally used for food or drink. Keep away from food, drink and animal feedingstuffs.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
General ventilation.
Wear suitable gloves. Chemical protection gloves are suitable, which are tested according to EN 374. Check leak-tightness/impermeability prior to use. In the case of wanting to use the gloves again, clean them before taking off and air them well. For special purposes, it is recommended to check the resistance to chemicals of the protective gloves mentioned above together with the supplier of these gloves.
Wear eye/face protection.
In case of inadequate ventilation wear respiratory protection.
Take recovery periods for skin regeneration. Preventive skin protection (barrier creams/ointments) is recommended. Wash hands thoroughly after handling.
Use appropriate container to avoid environmental contamination. Keep away from drains, surface and ground water.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
See below 'Conditions to avoid'.
Concerning incompatibility: see below "Conditions to avoid" and "Incompatible materials".
No known hazardous reactions.
There are no specific conditions known which have to be avoided.
Oxidisers
Reasonably anticipated hazardous decomposition products produced as a result of use, storage, spill and heating are not known. Hazardous combustion products: see section 5.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
12.5 Results of PBT and vPvB assessment
12.6 Endocrine disrupting properties
The substance does not contain an endocrine disruptor (ED) at a concentration of ≥ 0,1%.
12.7 Other adverse effects
12.1 Toxicity
12.2 Persistence and degradability
12.3 Bioaccumulative potential
12.4 Mobility in soil
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Indikator H25-3?
The signal word is warning.
What is the physical form of Indikator H25-3?
Indikator H25-3 is a liquid with dark green color. It has characteristic odor.
What is the solubility of Indikator H25-3?
Completely miscible with water.
What is Indikator H25-3 used for?
laboratory and analytical use
What are the hazard statements for Indikator H25-3?
This substance has 1 hazard statement:
- H319: Causes serious eye irritation.
What is the melting point of Indikator H25-3?
The melting point is not determined and the boiling point is 100 °C at 1,013 mPa.