Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Havoline Ultra SAE 0W-20
- Product Code
- 803093
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Passenger Car Motor Oil
Manufacturers & Suppliers
YX Smøreolie A/S
national supplier
Buddingevej 195, DK-2860 Søborg
+45 70 11 56 78
http://yxlube.dk
Emergency Contacts
Transportation Emergency Response
0044/(0)18 65 407333
Health Emergency
0044/(0)18 65 407333
Poison Control Centre Denmark
0045/ 82 12 12 12
Technical Information
0045/70 11 56 78
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
GHS Pictograms
Still copying SDS data manually?Free
You don't have to. NextSDS reads this SDS and adds the information to your library automatically.
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Lubricating oils EC: 276-738-4 | 72623-87-1 | 70% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
If exposed to excessive levels of material in the air, move the exposed person to fresh air.
Symptoms: Not expected to be harmful if inhaled. Contains a petroleum-based mineral oil. May cause respiratory irritation or other pulmonary effects following prolonged or repeated inhalation of oil mist at airborne levels above the recommended mineral oil mist exposure limit. Symptoms of respiratory irritation may include coughing and difficulty breathing.
Remove clothing and shoes if contaminated. To remove the material from skin, use soap and water. Discard contaminated clothing and shoes or thoroughly clean before reuse.
Symptoms: Contact with the skin is not expected to be harmful.
Remove contact lenses, if worn, and flush eyes with water.
Symptoms: Not expected to cause prolonged or significant eye irritation.
Do not induce vomiting.
Symptoms: Not expected to be harmful if swallowed.
Immediate Medical Attention
As a precaution, get medical advice for ingestion. Get medical attention if coughing or respiratory discomfort occurs after inhalation.
Medical Treatment
Not applicable.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Use water fog, foam, dry chemical or carbon dioxide (CO2) to extinguish flames.
A complex mixture of airborne solids, liquids, and gases including carbon monoxide, carbon dioxide, and unidentified organic compounds will be evolved when this material undergoes combustion. Combustion may form oxides of: Nitrogen.
For fires involving this material, do not enter any enclosed or confined fire space without proper protective equipment, including self-contained breathing apparatus.
Firefighter Protection
Do not enter any enclosed or confined fire space without proper protective equipment, including self-contained breathing apparatus.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Eliminate all sources of ignition in vicinity of spilled material. Refer to Sections 5 and 8 for more information.
Stop the source of the release if you can do it without risk. Contain release to prevent further contamination of soil, surface water or groundwater.
Clean up spill as soon as possible, observing precautions in Exposure Controls/Personal Protection. Use appropriate techniques such as applying non-combustible absorbent materials or pumping.
Materials: non-combustible absorbent materials
Related Products
Similar products with comparable safety profiles
Havoline ProDS P SAE 0W-20
---
Havoline Extra SAE 15W-40
---
Havoline ProDS V SAE 5W-30
---
Havoline Motor Oil SAE 30
---
Havoline XLC +B 50/50 (RL03)
---
7602 - Motor Oil Ultra 0W-40
---
Valvoline™ Advanced Full Synthetic SAE 10W-30 Motor Oil
---
Valvoline™ Non-Detergent SAE 30 ISO 100 Motor Oil
---
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Do not get in eyes, on skin, or on clothing. Do not taste or swallow. Wash thoroughly after handling.
Not Applicable
Wash thoroughly after handling.
Electrostatic charge may accumulate and create a hazardous condition when handling this material. To minimize this hazard, bonding and grounding may be necessary but may not, by themselves, be sufficient. Review all operations which have the potential of generating and accumulating an electrostatic charge and/or a flammable atmosphere (including tank and container filling, splash filling, tank cleaning, sampling, gauging, switch loading, filtering, mixing, agitation, and vacuum truck operations) and use appropriate mitigating procedures.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Use in a well-ventilated area.
Suggested materials for protective gloves include: 4H (PE/EVAL), Nitrile Rubber, Silver Shield, Viton.
No special eye protection is normally required. Where splashing is possible, wear safety glasses with side shields as a good safety practice.
No respiratory protection is normally required. If user operations generate an oil mist, determine if airborne concentrations are below the occupational exposure limit for mineral oil mist. If not, wear an approved respirator that provides adequate protection from the measured concentrations of this material. For air-purifying respirators use a particulate cartridge.
No special protective clothing is normally required. Where splashing is possible, select protective clothing depending on operations conducted, physical requirements and other substances in the workplace.
See relevant Community environmental protection legislation or the Annex, as applicable.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
This material is considered stable under normal ambient and anticipated storage and handling conditions of temperature and pressure.
May react with strong acids or strong oxidizing agents, such as chlorates, nitrates, peroxides, etc.
Hazardous polymerization will not occur.
Not applicable
Not applicable
None known (None expected)
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
12.1 Toxicity
This material is not expected to be harmful to aquatic organisms.
12.2 Persistence and degradability
This material is not expected to be readily biodegradable.
12.3 Bioaccumulative potential
12.4 Mobility in soil
12.5 Results of PBT and vPvB assessment
The product is not, or does not contain, a substance that is a potential PBT or a vPvB.
12.6 Other adverse effects
No other adverse effects identified.
12.1 Toxicity
12.2 Persistence and degradability
12.3 Bioaccumulative potential
12.4 Mobility in soil
12.5 Results of PBT and vPvB assessment
12.6 Endocrine disrupting properties
12.7 Other adverse effects
12.1 Toxicity
Based on available data, the classification criteria are not met
12.1 Toxicity
12.1 Toxicity
12.1 Toxicity
Based on available data, the classification criteria are not met
12.1 Toxicity
12.2 Persistence and degradability
12.2 Persistence and degradability
Persistence and degradability
Bioaccumulative potential
Based on available data, the classification criteria are not met
Bioaccumulative potential
Based on available data, the classification criteria are not met
Bioaccumulative potential
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Use material for its intended purpose or recycle if possible. Oil collection services are available for used oil recycling or disposal.
Contact your sales representative or local environmental or health authorities for approved disposal or recycling methods.
Waste Codes
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The following components of this material are found on the regulatory lists indicated.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Havoline Ultra SAE 0W-20?
The signal word is no signal word.
What is the physical form of Havoline Ultra SAE 0W-20?
Havoline Ultra SAE 0W-20 is a liquid with amber color. It has petroleum odor odor.
What is the solubility of Havoline Ultra SAE 0W-20?
Soluble in hydrocarbons; insoluble in water
What is Havoline Ultra SAE 0W-20 used for?
Passenger Car Motor Oil
What is the melting point of Havoline Ultra SAE 0W-20?
The melting point is Not Applicable and the boiling point is No data available.