NextSDS Logo
Safety Data Sheet EN

Havoline XLC +B 50/50 (RL03)

Keep this SDS organized and up to date

Add this SDS to your NextSDS library and keep all its safety information in one place.

Add to my SDS library for free
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
Havoline XLC +B 50/50 (RL03)
Product Code
002400

Regulatory Identifiers

CAS Number
N/A

Identified Uses

Antifreeze/Coolant

Manufacturers & Suppliers

A

ARTECO N.V.

manufacturer

Technologiepark-Zwijnaarde 2, B-9052 Gent-Zwijnaarde

32 (0) 9 293 7320

Emergency Contacts

Transportation Emergency Response

0044/(0)18 65 407333

Health Emergency

0044/(0)18 65 407333

Poison Control Center

0032/(0)70 245 245

Emergency Contact

+86 532 83889090

24h

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified warning

Hazard Classifications

STOT RE Cat. 2 H373

GHS Pictograms

GHS08 - Serious health hazard

GHS08

Hazard Statements

H373 May cause damage to organs (Kidney) through prolonged or repeated exposure

Precautionary Statements

P101 If medical advice is needed, have product container or label at hand
P102 Keep out of reach of children
P260 Do not breathe dust/fume/gas/mist/vapours/spray
P301 + P310 IF SWALLOWED: Immediately call a POISON CENTER or doctor/physician
P501 Dispose of contents/container in accordance with applicable local/regional/national/international regulations

Still copying SDS data manually?Free

You don't have to. NextSDS reads this SDS and adds the information to your library automatically.

Let NextSDS do it for me
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type mixture
Chemical Name CAS Number Concentration Hazardous
Ethylene glycol EC: 203-473-3 107-21-1 34 - 80% Yes
Sodium 2-ethylhexanoate EC: 243-283-8 19766-89-3 0.1 - 3% Yes
04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

If exposed to excessive levels of material in the air, move the exposed person to fresh air.

Symptoms: coughing or respiratory discomfort

Skin contact

Remove clothing and shoes if contaminated. To remove the material from skin, use soap and water. Discard contaminated clothing and shoes or thoroughly clean before reuse.

Symptoms: Contact with the skin is not expected to be harmful.

Eye contact

Remove contact lenses, if worn, and flush eyes with water.

Symptoms: Not expected to cause prolonged or significant eye irritation.

Ingestion

If swallowed, get immediate medical attention. Do not induce vomiting. Never give anything by mouth to an unconscious person.

Symptoms: May be harmful if swallowed.

Immediate Medical Attention

If swallowed, get immediate medical attention. Get medical attention if coughing or respiratory discomfort occurs.

Medical Treatment

Not applicable.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

Dry Chemical, CO2, AFFF Foam or alcohol resistant foam.

Specific hazards

A complex mixture of airborne solids, liquids, and gases including carbon monoxide, carbon dioxide, and unidentified organic compounds will be evolved when this material undergoes combustion.

Instructions

For fires involving this material, do not enter any enclosed or confined fire space without proper protective equipment, including self-contained breathing apparatus.

Firefighter Protection

Do not enter any enclosed or confined fire space without proper protective equipment, including self-contained breathing apparatus.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Emergency procedures

Eliminate all sources of ignition in vicinity of spilled material. Refer to Sections 5 and 8 for more information.

Environmental

Stop the source of the release if you can do it without risk. Contain release to prevent further contamination of soil, surface water or groundwater.

Cleanup methods

Clean up spill as soon as possible, observing precautions in Exposure Controls/Personal Protection. Use appropriate techniques such as applying non-combustible absorbent materials or pumping.

—

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

Do not get in eyes, on skin, or on clothing. Do not taste or swallow. Do not breathe vapor or fumes. Wash thoroughly after handling. Keep out of the reach of children.

Storage

Not Applicable

Hygiene

Wash thoroughly after handling.

Fire prevention

Electrostatic charge may accumulate and create a hazardous condition when handling this material. To minimize this hazard, bonding and grounding may be necessary but may not, by themselves, be sufficient. Review all operations which have the potential of generating and accumulating an electrostatic charge and/or a flammable atmosphere (including tank and container filling, splash filling, tank cleaning, sampling, gauging, switch loading, filtering, mixing, agitation, and vacuum truck operations) and use appropriate mitigating procedures.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

Engineering

Use process enclosures, local exhaust ventilation, or other engineering controls to control airborne levels below the recommended exposure limits. Use in a well-ventilated area.

Hands

Suggested materials for protective gloves include: Natural rubber, Neoprene, Nitrile Rubber, Polyvinyl Chloride (PVC or Vinyl).

Eyes

No special eye protection is normally required. Where splashing is possible, wear safety glasses with side shields as a good safety practice.

Respiratory

Determine if airborne concentrations are below the recommended occupational exposure limits for jurisdiction of use. If airborne concentrations are above the acceptable limits, wear an approved respirator that provides adequate protection from this material, such as: Air-Purifying Respirator for Organic Vapors, Dusts and Mists. Use a positive pressure air-supplying respirator in circumstances where air-purifying respirators may not provide adequate protection.

Skin/Body

No special protective clothing is normally required. Where splashing is possible, select protective clothing depending on operations conducted, physical requirements and other substances in the workplace.

Environmental

See relevant Community environmental protection legislation or the Annex, as applicable.

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Physical State
Liquid
Physical State Data
liquid
State Under Standard Conditions
---
Appearance
---
Colour
Red
Colour Intensity
---
Form
---
Odor
Faint or Mild
Odor Threshold
No data available
Ph
8.4
Melting Point
Not Applicable
Boiling Point
109°C (228.2°F) (Estimated)
Flash Point
Not Applicable
Freezing Point
-37°C (-34.6°F)
Softening Point
---
Solidification Point
---
Cloud Point
---
Crystallisation Point
---
Relative Evaporation Rate
---
Evaporation Rate
---
Vapor Pressure
No data available
Vapor Density
>1
Relative Density
---
Bulk Density
---
Density
1 kg/l @ 15°C (59°F) (Typical)
Flammability
No Data Available
Upper Explosive Limit
Not Applicable
Lower Explosive Limit
Not Applicable
Explosive Limits
---
Auto Ignition Temperature
No data available
Decomposition Temperature
No Data Available
Solubility
Soluble in water.
Partition Coefficient
No data available
Solubility In Water
---
Solubility In Fat
---
Molecular Weight
---
Voc Content
---
Metal Corrosion
---
Dynamic Viscosity
---
Kinematic Viscosity
---
Properties Status
---
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Stability

This material is considered stable under normal ambient and anticipated storage and handling conditions of temperature and pressure.

Reactivity

May react with strong acids or strong oxidizing agents, such as chlorates, nitrates, peroxides, etc.

Hazardous reactions

Hazardous polymerization will not occur.

Avoid

Not applicable

Incompatible

Not applicable

Decomposition

Ketones (Elevated temperatures), Aldehydes (Elevated temperatures)

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

12.1 Toxicity

This material is not expected to be harmful to aquatic organisms. The product has not been tested. The statement has been derived from the properties of the individual components.

The material is not expected to be harmful to aquatic organisms based on component properties; no direct testing performed.

12.2 Persistence and degradability

This material is expected to be readily biodegradable. The product has not been tested. The statement has been derived from the properties of the individual components.

The material is expected to be readily biodegradable based on component properties, though the product itself has not been tested.

12.3 Bioaccumulative potential

Bioconcentration Factor: No Data Available Octanol/Water Partition Coefficient: No data available

No data available for bioconcentration factor or octanol/water partition coefficient.

12.4 Mobility in soil

No data available.

No data available.

12.5 Results of PBT and vPvB assessment

This product is not, or does not contain, a substance that is a potential PBT or a vPvB.

The product does not contain substances identified as PBT or vPvB.

12.6 Other adverse effects

No other adverse effects identified.

No other adverse effects identified.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

Treatment

Use material for its intended purpose or recycle if possible.

Disposal

This material, if it must be discarded, may meet the criteria of a hazardous waste as defined by international, country, or local laws and regulations.

Waste Codes

16 01 14 EWC
14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

The following components of this material are found on the regulatory lists indicated.

Chemical Safety Assessment Not performed
?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for Havoline XLC +B 50/50 (RL03)?

The signal word is warning.

What is the physical form of Havoline XLC +B 50/50 (RL03)?

Havoline XLC +B 50/50 (RL03) is a liquid with red color. It has faint or mild odor.

What is the solubility of Havoline XLC +B 50/50 (RL03)?

Soluble in water.

What is Havoline XLC +B 50/50 (RL03) used for?

Antifreeze/Coolant

What are the hazard statements for Havoline XLC +B 50/50 (RL03)?

This substance has 1 hazard statement:

  • H373: May cause damage to organs (Kidney) through prolonged or repeated exposure

What is the melting point of Havoline XLC +B 50/50 (RL03)?

The melting point is Not Applicable and the boiling point is 109°C (228.2°F) (Estimated).