Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- 8078 Dry Graphite Lubricant
- Product Form
- Aerosol
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Use on bearings, locks, oven parts, pre-assembled moving parts, sliding windows and doors. Use as a parting compound on dies, sand cores, match plates, drawing extrusions, die casting, and pewter moldings. Also use as a coating on conductive material, or sealant.
Uses advised against
Poorly ventilated areas.
Manufacturers & Suppliers
Aervoe LLC
manufacturer
1100 Mark Circle, Gardnerville, Nevada 89410
1-775-782-0100
Emergency Contacts
CHEMTREC
1-800-424-9300
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS02
GHS04
GHS07
Hazard Statements
Precautionary Statements
Still copying SDS data manually?Free
You don't have to. NextSDS reads this SDS and adds the information to your library automatically.
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Acetone EC: 200-662-2 | 67-64-1 | 15 - 40% | Yes |
| Hydrocarbon Propellant EC: 270-705-8 | 68476-86-8 | 15 - 40% | Yes |
| Dimethyl Carbonate EC: 210-478-4 | 616-38-6 | 15 - 40% | Yes |
| Graphite Powder EC: 231-955-3 | 7782-42-5 | 1 - 5% | No |
First Aid Measures
Emergency procedures for chemical exposure incidents
Remove victim to fresh air and provide oxygen if breathing is difficult. If not breathing, give artificial respiration, preferably mouth to mouth. Get medical attention immediately.
Wash with soap and water. Remove contaminated clothing and shoes. Get medical attention immediately. Wash clothing before reuse.
If contact with eyes, immediately flush eyes with plenty of water for at least 15 minutes, while holding eyelids open. Get medical attention immediately.
If swallowed, wash out mouth with water provided the person is conscious. Do not induce vomiting. Never give anything by mouth to an unconscious person. Get medical attention immediately.
Immediate Medical Attention
Get medical attention immediately.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Carbon dioxide, dry chemical, water spray.
None known
Closed Containers may rupture due to the buildup of pressure from extreme temperatures.
Use water spray to cool containers exposed to heat or fire to prevent pressure build up.
Firefighter Protection
In the event of a fire, wear full protective clothing and NIOSH- approved self-contained breathing apparatus with full face piece operated in the pressure demand or other positive pressure mode.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
1.) Evacuate unprotected personnel from the area. 2.) Remove sources of ignition if safe to do so. 3.) Pickup spilled materials using non-sparking tools and place in an appropriate container for disposal. 4.) Contain spill to prevent material from entering sewage or ground water systems. 5.) Always dispose of waste materials in accordance with all EU, National and Local Regulations.
Contain spill to prevent material from entering sewage or ground water systems.
Pickup spilled materials using non-sparking tools and place in an appropriate container for disposal.
Related Products
Similar products with comparable safety profiles
Graphite Dry Powder
---
BONDERITE L-GP 154 ACHESON GRAPHITE LUBRICANT
---
Poco Graphite Synthetic Graphite
---
BONDERITE L-GP GC-4A GRAPHITE LUBRICANT ACHESON
---
BONDERITE L-GP JL 44002 GRAPHITE LUBRICANT ACHESON
---
BONDERITE L-GP 634R GRAPHITE LUBRICANT ACHESON known as DAG 634R
---
690 FG Lubricant (Aerosol)
---
BONDERITE L-GP 193R GRAPHITE LUBRICANT ACHESON known as DAG 193R
---
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Flammable Aerosol, use in a well ventilated area. Do not use near sources of ignition. Do not to eat, drink and smoke while working with this material. Wash hands after use.
Store out of direct sunlight.
Do not to eat, drink and smoke while working with this material. Wash hands after use.
Do not use near sources of ignition.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Ensure adequate ventilation. A system of local and/or general exhaust is recommended to keep employee exposures below the Airborne Exposure Limits. Keep away from sources of ignition. Take precautionary measures against static discharge.
gloves
Eye & face protection devices such as safety glasses, safety goggles or face shield are recommended.
Use only in an adequately ventilated area. For unknown vapor concentrations use a positive-pressure, pressure-demand, self-contained breathing apparatus (SCBA).
Wear the appropriate protective clothing, including boots, gloves, lab coat, apron or coveralls, as appropriate, to prevent skin contact.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under normal conditions
Hazardous polymerization will not occur under normal conditions
Heat and ignition sources
Strong Oxidizing Agents
Will not occur
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
Ecotoxicity
Persistence and degradability
Bioaccumulative potential
Mobility in soil
Results of PBT and vPvB assessment
Endocrine disrupting properties
Other adverse effects
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
For proper disposal of used material, an assessment must be completed to determine the proper and permissible waste management options permitted under applicable rules, regulations and/or laws governing your location.
Dispose of material in accordance with EU, national and local requirements.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- UN1950
- Shipping Name
- Aerosols
- Transport Class
- 2.1
- Packing Group
- Not Applicable
Reference IMDG code part 3
Reference IATA Dangerous Goods Regulation
Regulatory Information
Chemical regulations, safety assessments, and compliance status
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for 8078 Dry Graphite Lubricant?
The signal word is danger.
What is the physical form of 8078 Dry Graphite Lubricant?
8078 Dry Graphite Lubricant is a liquid appearing as black liquid . It has ethereal odor.
What is the solubility of 8078 Dry Graphite Lubricant?
Negligible
What is 8078 Dry Graphite Lubricant used for?
Use on bearings, locks, oven parts, pre-assembled moving parts, sliding windows and doors. Use as a parting compound on dies, sand cores, match plates, drawing extrusions, die casting, and pewter moldings. Also use as a coating on conductive material, or sealant.
What are the hazard statements for 8078 Dry Graphite Lubricant?
This substance has 6 hazard statements:
- H220: Extremely flammable gas.
- H222: Extremely Flammable Aerosol
- H225: Highly flammable liquid and vapour.
- H229: Pressurized container: may burst if heated
- H319: Causes serious eye irritation.
- H336: May cause drowsiness or dizziness.
What is the melting point of 8078 Dry Graphite Lubricant?
The melting point is N/AV and the boiling point is N/AV.