Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Kleen-Flush 010
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Cleaning agent/ Cleaner
Manufacturers & Suppliers
DoALL Europa B.V.
manufacturer
Delijestraat 14, NL-3316 GE Dordrecht
+31(0)78-65260 60
Emergency Contacts
Emergency Contact
+31(0)78-65260 60
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
Still copying SDS data manually?Free
You don't have to. NextSDS reads this SDS and adds the information to your library automatically.
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
Combination of emulsifiers, conserving agents and water.
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Halbacetal | --- | 2.5 - 10% | Yes |
| Alkylarylethoxilat | --- | 25 - 50% | Yes |
For the wording of the listed risk phrases refer to section 16.
First Aid Measures
Emergency procedures for chemical exposure incidents
Supply fresh air; consult doctor in case of complaints.
Immediately wash with water and soap and rinse thoroughly.
Rinse opened eye for several minutes under running water. Then consult a doctor.
Call for a doctor immediately.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Use fire fighting measures that suit the environment.
Firefighter Protection
Mount respiratory protective device.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Prevent seepage into sewage system, workpits and cellars. Do not allow to enter sewers/ surface or ground water.
Absorb with liquid-binding material
Materials: sand, diatomite, acid binders, universal binders, sawdust
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Ensure good ventilation/exhaustion at the workplace. Do not inhalate vapour. Prevent skin and eye contact
Protect from frost and direct sunlight. Observe all storage regulations.
No special measures required.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
No further data; see item 7.
Protective gloves. Material of gloves: Nitrile rubber, NBR. Penetration time of glove material: Nitrile: 0.4 mm, break trough time > 240 min. The exact break trough time has to be found out by the manufacturer of the protective gloves and has to be observed.
Tightly sealed goggles.
Not required.
Protective work clothing.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
No dangerous reactions known
No decomposition if used according to specifications.
Strong oxidizers
No dangerous decomposition products known
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
12.1 Toxicity
12.2 Persistence and degradability
12.3 Bioaccumulative potential
12.4 Mobility in soil
12.5 Results of PBT and vPvB assessment
12.6 Endocrine disrupting properties
12.7 Other adverse effects
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Must not be disposed of together with household garbage. Do not allow product to reach sewage system.
Waste Codes
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The product has been marked in accordance with EU Directives / respective national laws.
Code letter and hazard designation: Xn Harmful. Hazard-determining components: Alkylarylethoxilat. Risk phrases: 22, 41, 53. Safety phrases: 25, 26, 36/37/39, 61.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Kleen-Flush 010?
The signal word is na: r-phrases.
What is the physical form of Kleen-Flush 010?
Kleen-Flush 010 is a fluid with yellow color. It has pungent odor.
What is Kleen-Flush 010 used for?
Cleaning agent/ Cleaner
What is the melting point of Kleen-Flush 010?
The melting point is undetermined and the boiling point is undetermined.