79DA RUST TREATMENT 10.25OZ AE

Remove to fresh air. If breathing has stopped, give artificial respiration. Do not use mouth-to-mouth method if victim ingested or inhaled the substance; give artificial respiration with the aid of a pocket mask equipped with a one-way valve or other proper respiratory medical device. If breathing is difficult, (trained personnel should) give oxygen. If symptoms persist, call a physician.

Symptoms: Coughing and/ or wheezing. Difficulty in breathing. Inhalation of high vapor concentrations may cause symptoms like headache, dizziness, tiredness, nausea and vomiting.

In case of contact with liquefied gas, thaw frosted parts with lukewarm water. Wash off immediately with soap and plenty of water for at least 15 minutes.

Rinse immediately with plenty of water, also under the eyelids, for at least 15 minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Keep eye wide open while rinsing. Do not rub affected area.

Rinse mouth. Never give anything by mouth to an unconscious person. Call a physician or poison control center immediately.

Dry chemical. Carbon dioxide (CO2). Water spray. In case of fire, use water spray, foam, dry chemical, or CO2.

DO NOT EXTINGUISH A LEAKING GAS FIRE UNLESS LEAK CAN BE STOPPED.

Risk of ignition. Keep product and empty container away from heat and sources of ignition. Cylinders may rupture under extreme heat. Damaged cylinders should be handled only by specialists. Containers may explode when heated. Ruptured cylinders may rocket.

In the event of fire, cool tanks with water spray.

Evacuate personnel to safe areas. Keep people away from and upwind of spill/leak.

Flood with water to complete polymerization and scrape off floor. Soak up with inert absorbent material. Pick up and transfer to properly labeled containers.

Materials: inert absorbent material

Use personal protection equipment. Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. Do not spray on an open flame or other ignition source. Take necessary action to avoid static electricity discharge (which might cause ignition of organic vapors). Use spark-proof tools and explosion-proof equipment. Handle product only in closed system or provide appropriate exhaust ventilation. Keep in an area equipped with sprinklers. Do not puncture or incinerate cans. Contents under pressure. In case of rupture. Empty containers pose a potential fire and explosion hazard. Do not cut, puncture or weld containers. Handle in accordance with good industrial hygiene and safety practice. Avoid contact with skin, eyes or clothing. Do not eat, drink or smoke when using this product. Remove contaminated clothing and shoes. Take off contaminated clothing and wash before reuse. Do not breathe vapor or mist. In case of insufficient ventilation, wear suitable respiratory equipment.

Keep containers tightly closed in a dry, cool and well-ventilated place. Keep out of the reach of children. Store locked up.

Handle in accordance with good industrial hygiene and safety practice. Avoid contact with skin, eyes or clothing. Do not eat, drink or smoke when using this product. Remove contaminated clothing and shoes. Take off contaminated clothing and wash before reuse.

Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. Do not spray on an open flame or other ignition source. Take necessary action to avoid static electricity discharge. Use spark-proof tools. Keep in an area equipped with sprinklers.

Showers, Eyewash stations, Ventilation systems.

Impervious gloves. Wear suitable gloves.

Tight sealing safety goggles.

Appropriate respiratory protection should be selected and used according to the chemical nature, hazards and use of this product and safety requirements of the local jurisdiction. If exposure limits are exceeded or irritation is experienced, ventilation and evacuation may be required.

Wear suitable protective clothing. Long sleeved clothing. Chemical resistant apron. Antistatic boots.

Stable under normal conditions.

No information available.

None under normal processing. Hazardous polymerization: No information available.

Heat, flames and sparks. Excessive heat.

Strong acids. Strong bases. Strong oxidizing agents.

Carbon oxides. Aldehydes. Ketones and their derivatives.

Should not be released into the environment. Dispose of in accordance with local regulations. Dispose of waste in accordance with environmental legislation.

Should not be released into the environment. Dispose of in accordance with local regulations. Dispose of waste in accordance with environmental legislation.