Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Chemlox Polishing Fluid
- Product Code
- OCON-141
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Aqueous suspension of chlorine and abrasive material for polishing laboratory and industrial samples.
Uses advised against
This product is to be used only for the purpose stated above.
Manufacturers & Suppliers
Logitech Ltd
manufacturer
Erskine Ferry Road, Old Kilpatrick, Glasgow, G60 5EU, Scotland, UK
+44 (0) 1389 875444
Emergency Contacts
Emergency Contact
+44 (0) 1389 875444
09:00 – 17:00 Monday to Friday
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
GHS Pictograms
Still copying SDS data manually?Free
You don't have to. NextSDS reads this SDS and adds the information to your library automatically.
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
This material is a mixture of water, sodium hypochlorite, non-hazardous abrasive materials and surfactants. Sodium hypochlorite is present at less than 5%.
There are no hazardous substances present at or above threshold limits.
First Aid Measures
Emergency procedures for chemical exposure incidents
Inhalation of gases / fumes: Move to fresh air. If person experiences irritation or difficulty breathing seek medical advice
Symptoms: Product is a liquid – inhalation is unlikely.
Wash area with soap and water then rinse thoroughly with water. If person experiences continued irritation seek medical advice
Symptoms: continued irritation
Immediately wash out with plenty of water. After initial flushing, remove any contact lenses and continue flushing. Seek medical advice.
If a small amount ingested, drink plenty of water. If more than a small amount ingested, or if person experiences discomfort seek medical advice. Do not induce vomiting.
Symptoms: discomfort
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Use extinguishing medium appropriate to surroundings
The product contains water which may boil or turn to steam in a fire situation. Chlorine and hydrochloric acid gas may be evolved.
Firefighter Protection
Wear self contained breathing apparatus
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Prevent eye contact and minimise skin contact. Use personal protective equipment. Avoid breathing vapours, mist or gas.
Do not allow to contaminate rivers, streams, other waterways, drains, soil or the remaining environment.
Sweep or scrape the absorbed material into a sealable storage container. Remove final residues with a water / detergent mixture
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Prevent eye contact and minimise skin contact with liquid material. Avoid breathing vapour / fume.
Keep container tightly closed in a cool, dry and well-ventilated place.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Provide adequate ventilation. Minimise inhalation of fumes.
Chemically impervious gloves suitable for use with chlorine solutions e.g. Nitrile, PVC gloves. Follow manufacturer recommendations on inspection and replacement. Fabric gloves or gloves with seams are not suitable.
EN approved goggles or face shield if eye contact likely.
If significant vapour / fume generated (or irritation is experienced) use an EN149 approved respirator fitted with a combined particle and chlorine filter. The correct selection, fitting, use, storage and maintenance of respiratory protective equipment is important. Follow manufacturer's recommendation or seek expert advice. HSE document HSG 53 provides some guidance
Wear long sleeved clothing to prevent splashing of skin. Replace clothing that becomes contaminated before the product comes into contact with the skin.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable at room temperature.
Not reactive to materials commonly used in the transportation, handling and storage but is corrosive to metals. Reacts with acids to release chlorine gas. Chlorine is very hazardous to health.
Will react with acids to release chlorine gas. Chlorine is very hazardous to health.
Contact with acids, excessive heat
None identified
None identified
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
Bioaccumulative potential
Data not available. Not expected to be bioaccumulative.
Mobility in Soil
Toxicity
No data available for acute toxicity to fish, crustacea, or algae.
Persistence and biodegradability
Results of PBT and vPvB assessment
No components are classified as PBT or vPvB.
Other adverse effects
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Dispose of product as hazardous waste in accordance with local, national and international legislation, using an approved registered waste disposal company.
Dispose of product as hazardous waste in accordance with local, national and international legislation, using an approved registered waste disposal company.
Waste Codes
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
This Safety Data Sheet has been prepared in accordance with the requirements of regulation (EC) No 1907/2006 as amended by regulation (EU) No 453/2010.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Chemlox Polishing Fluid?
The signal word is no signal word.
What is the physical form of Chemlox Polishing Fluid?
Chemlox Polishing Fluid is a liquid appearing as white liquid with white color. It has slight 'chlorine' smell odor.
What is Chemlox Polishing Fluid used for?
Aqueous suspension of chlorine and abrasive material for polishing laboratory and industrial samples.
What is the melting point of Chemlox Polishing Fluid?
The melting point is information not available and the boiling point is 100 °C.