NextSDS Logo
Safety Data Sheet EN

HEMATOXYLIN G3

Keep this SDS organized and up to date

Add this SDS to your NextSDS library and keep all its safety information in one place.

Add to my SDS library for free
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
HEMATOXYLIN G3
Product Code
HEMG3-OT-X**

Regulatory Identifiers

CAS Number
N/A

Identified Uses

Hematoxylin according to Gill for nuclear staining.

Uses advised against

Only the identified uses are advised.

Manufacturers & Suppliers

B

BioGnost Ltd.

manufacturer

Medjugorska 59, Zagreb

+385 1 2409997

Emergency Contacts

National Protection and Rescue Directorate

112

Medical information

+385 1 2348 342

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified warning

Hazard Classifications

Acute Tox. Cat. 4 H302

GHS Pictograms

GHS07 - Health hazard

GHS07

Hazard Statements

H302 Harmful if swallowed.

Precautionary Statements

P280 Wear protective gloves/protective clothing/eye/protection/face protection.
P301 + P312 IF SWALLOWED: Call a POISON CENTER/doctor if you feel unwell.

Still copying SDS data manually?Free

You don't have to. NextSDS reads this SDS and adds the information to your library automatically.

Let NextSDS do it for me
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type mixture
Chemical Name CAS Number Concentration Hazardous
ethylene glycol EC: 203-473-3 107-21-1 25 - 45% Yes
04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

Carry the afflicted person out of the contaminated area into a well-ventilated area or out for fresh air. If breathing becomes erratic or it stops, immediately apply artificial respiration (other than mouth-to-mouth) and contact a physician.

Symptoms: Inhalation of large amounts of vapors in inadequately ventilated perimeter may cause coughing, sneezing, headache and nausea.

Skin contact

Remove contaminated clothing. Immediately wash with plenty of water and soap. Seek medical assistance if the symptoms of irritation remain.

Symptoms: Slight irritation. After short exposure, resorption effects are not likely. Long-term exposure may cause drying, cracking and tingling sensation of skin.

Eye contact

Rinse out with plenty of water with the eyelid held wide open using clean fingers. If the symptoms remain, immediately call a physician.

Symptoms: Direct eye contact may cause slight to moderate irritation, lacrimation and burning sensation.

Ingestion

Do not induce vomiting. Make the afflicted person drink a glass of water. If spontaneous vomiting occurs, wash the mouth with water, then make the person drink 100-200 ml of water and seek medical attention.

Symptoms: Swallowing may cause irritation of mucosa, tingling sensation in the mouth, burning sensation; higher levels of concentration may cause nausea, abdominal pain and vomiting. In case of vomiting, aspiration causes coughing, difficult breathing. Higher levels of concentration may cause suffocation.

Immediate Medical Attention

If breathing becomes erratic or it stops, immediately apply artificial respiration (other than mouth-to-mouth) and contact a physician. If the symptoms remain, immediately call a physician.

Medical Treatment

Treat symptomatically.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

Small fire - water spray, dry powder, CO₂ Large fire - water spray or alcohol-resistant foam

Unsuitable media

water jet

Instructions

Cool closed containers exposed to fire with water spray or vapor.

Firefighter Protection

Use a self-contained open-circuit compressed air breathing apparatus and fireproof clothing.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Emergency procedures

Mark the area using proper signs.

Large spill

In case of large spillage contact National Protection and Rescue Directorate (NPRD) on 112.

Environmental

Do not dispose of in sewage, drainage system and waterways.

Cleanup methods

Where possible, the substance can be absorbed by using inflammable material (sand, diatomaceous earth, vermiculite). Place the waste material in tightly closed impermeable containers. Store the substance in well ventilated storage rooms until disposal. Submit for disposal to the legal persons authorized by the Ministry of Environmental and Nature Protection. After disposal of the products, wash the area and and involved materials with water.

Materials: sand, diatomaceous earth, vermiculite

—

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Storage

Keep in tightly closed and upright set containers in a well ventilated storage rooms, and away from sources of heat, sunlight, and other incompatible substances.

Hygiene

Do not eat, drink or smoke in the workspace. Thoroughly wash hands after work and before eating.

Fire prevention

Keep away from sources of heat and ignition. Do not smoke.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

Engineering

Use the product in well ventilated rooms. Organization of work in order to reduce other worker's influence during work process. Secure proper workspace ventilation in order to keep concentration levels in air below permitted levels.

Hands

Protective gloves must be according to standard EN 374. Glove material: nitrile rubber Glove thickness: ≥0.11 mm Break through time: >480 min

Eyes

Safety glasses that stick to face (preventing splashing) (EN 166) or visor.

Respiratory

Protective full face mask (EN 136) or half mask (EN 140) equipped with a filter for organic vapors, type "A" (boiling point >65°C) according to EN 14387) used when concentration levels exceed GVI.

Skin/Body

Wear antistatic clothing made of natural fibers (such as cotton) with long sleeves (EN 13034), and shoes that cover the entire foot (EN 10335).

Environmental

Substance/mixture related measures: See Section 6. Structural measures: Use modern equipment. Organisational measures: Adapt the work process to the required working conditions of the workplace. Technical measures: See Section 6.

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Language Code
---
Physical State
liquid
Physical State Data
liquid
State Under Standard Conditions
---
Appearance
---
Colour
dark red
Colour Intensity
---
Form
---
Odor
no information available
Odor Threshold
---
Ph
---
Melting Point
---
Boiling Point
---
Flash Point
---
Freezing Point
---
Softening Point
---
Solidification Point
---
Cloud Point
---
Crystallisation Point
---
Relative Evaporation Rate
---
Evaporation Rate
---
Vapor Pressure
---
Vapor Density
---
Relative Density
---
Bulk Density
---
Density
---
Flammability
---
Upper Explosive Limit
---
Lower Explosive Limit
---
Explosive Limits
---
Auto Ignition Temperature
---
Decomposition Temperature
---
Solubility
---
Partition Coefficient
---
Solubility In Water
---
Solubility In Fat
---
Molecular Weight
---
Voc Content
---
Metal Corrosion
---
Dynamic Viscosity
---
Kinematic Viscosity
---
Properties Status
---
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Stability

The product is chemically stable under standard ambient conditions of storing and using.

Reactivity

See subsections 10.3 through 10.5.

Hazardous reactions

With strong oxidants, sodium-hydroxide, sulfuric acid, aluminum.

Avoid

Sources of heat, sparks, and ignition.

Incompatible

Aluminum.

Decomposition

No information available.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

12.1. Toxicity

12.1. Toxicity

Acute (short-term) toxicity | Dose | Exposure time | Species | Method | Evaluation | Note Fish | LC50 | 96 hours | Fish | No information available | 72.860 mg/l (ethylene glycol) | - Crustacea: | EC50 | 48 hours | water flea | No information available | >100 mg/l (ethylene glycol) | - Algae/aquatic plants | IC50 | 8 days | algae | No information available | 6.500-13.000 mg/l (ethylene glycol) | - Microorganisms | LC50 | 72 hours | - | - | - | - Chronic toxicity | Dose | Exposure time | Species | Method | Evaluation | Note Fish | LC50 | 96 hours | No information available | No information available | No information available | - Crustacea: | EC50 | 48 hours | No information available | No information available | No information available | - Algae/aquatic plants | IC50 | 72 hours | No information available | No information available | No information available | -

12.2. Persistence and degradability

Abiotic degradation Degradation half-lives: Marine water (No information available), Fresh water (No information available), Air (No information available), Soil (No information available) Biodegradation: % Degradation (No information available), Time (days) (No information available), Method (No information available), Evaluation (No information available), Note (No information available)

12.3. Bioaccumulative potential

Partition coefficient: n-octanol/water (log Kow): Value (-), Concentration (No information available), pH (-), °C (-), Method (No information available), Evaluation (No information available), Note (-) Bioconcentration factor (BCF): Value (No information available), Species (No information available), Method (No information available), Evaluation (No information available), Note (No information available) Chronic ecotoxicity: Value (Chronic toxicity on fish LC50, Chronic toxicity on crustacea (Daphnia) EC50), Dose (No information available), Exposure time (No information available), Species (No information available), Method (No information available), Evaluation (No information available), Note (-)

12.4. Mobility in soil

Known or predicted distribution in environmental compartments: No information available Surface tension: No information available Adsorption / desorption: No information available

12.5. Results of PBT and vPvB assessment

Based on available data, the product does not contain any PBT or vPvB substances.

12.6. Endocrine disrupting properties

No known endocrine disrupting properties that affect the environment.

12.7. Other adverse effects

No adverse effects are expected.
13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

Treatment

Submit for disposal to the legal person authorized by the Ministry of Environmental and Nature Protection.

Disposal

Submit the remains to the collectors authorized by the ministry in charge. Do not dispose of in places where ignition may occur.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

Safety, health and environmental regulations/legislation specific for the substance or mixture

Chemical Safety Assessment Not performed
?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for HEMATOXYLIN G3?

The signal word is warning.

What is the physical form of HEMATOXYLIN G3?

HEMATOXYLIN G3 is a liquid with dark red color. It has no information available odor.

What is HEMATOXYLIN G3 used for?

Hematoxylin according to Gill for nuclear staining.

What are the hazard statements for HEMATOXYLIN G3?

This substance has 1 hazard statement:

  • H302: Harmful if swallowed.