NextSDS Logo
Safety Data Sheet EN

GBX Developer and Replenisher

Keep this SDS organized and up to date

Add this SDS to your NextSDS library and keep all its safety information in one place.

Add to my SDS library for free
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
GBX Developer and Replenisher
Product Code
5158597
Synonyms
PCD 4861

Regulatory Identifiers

CAS Number
N/A

Identified Uses

Restricted to professional users. Photographic chemical.

Manufacturers & Suppliers

C

Carestream Health, Inc.

manufacturer

150 Verona Street, Rochester, NY, USA 14608

800-328-2910

Emergency Contacts

CHEMTREC

+1-703-527-3887

CHEMTREC

1-800-424-9300

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified danger

Hazard Classifications

Eye Dam. Cat. 1
Skin Sens. Cat. 1
Muta. Cat. 2
Carc. Cat. 2
STOT RE Cat. 2

GHS Pictograms

GHS05 - Corrosive

GHS05

GHS07 - Health hazard

GHS07

GHS08 - Serious health hazard

GHS08

Hazard Statements

H317 May cause an allergic skin reaction
H318 Causes serious eye damage
H341 Suspected of causing genetic defects
H351 Suspected of causing cancer
H372 May cause damage to organs through prolonged or repeated exposure

Precautionary Statements

P201 Obtain special instructions before use.
P202 Do not handle until all safety precautions have been read and understood.
P261 Do not breath mist/vapours/spray.
P272 Contaminated work clothing should not be allowed out of the workplace.
P281 Use personal protective equipment as required.
P302 + P352 IF ON SKIN: Wash with plenty of soap and water. If skin irritation or rash occurs: Get medical advice/attention. Wash contaminated clothing before reuse.
P305 + P351 + P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing for at least 15 minutes. Immediately call a POISON CENTER or doctor/physician.
P308 + P313 IF exposed or concerned: Get medical advice/attention.
P405 Store locked up.
P501 Dispose of contents/container to an approved waste disposal plant.

Still copying SDS data manually?Free

You don't have to. NextSDS reads this SDS and adds the information to your library automatically.

Let NextSDS do it for me
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type mixture
Chemical Name CAS Number Concentration Hazardous
Water 7732-18-5 60 - 70% No
Potassium sulfite 10117-38-1 5 - 10% No
Diethylene glycol 111-46-6 5 - 10% No
Sodium sulfite 7757-83-7 5 - 10% No
Hydroquinone 123-31-9 5 - 8% No
Sodium borate 1330-43-4 0.1 - 1% No
04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

Administer oxygen if breathing is difficult. Move victim to fresh air. Apply artificial respiration if victim is not breathing.

Skin contact

Wash off immediately with soap and plenty of water while removing all contaminated clothes and shoes. Wash contaminated clothing before reuse. If skin irritation or rash occurs: Get medical advice/attention.

Symptoms: May cause an allergic skin reaction. Irritation. Rashes. Hives.

Eye contact

Immediately flush eyes with running water for at least 20 minutes.

Symptoms: Causes eye burns.

Ingestion

Never give anything by mouth to an unconscious person. Do NOT induce vomiting. Get medical attention.

Immediate Medical Attention

Get medical attention.

Medical Treatment

Treat symptomatically. May cause sensitization of susceptible persons.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

Dry chemical. CO₂, water spray or regular foam. Water spray, fog or regular foam.

Unsuitable media

Do not scatter spilled material with high pressure water streams.

Specific hazards

Some may burn but none ignite readily. Those substances designated with a "P" may polymerize explosively when heated or involved in a fire. Some may be transported hot.

Instructions

Move containers from fire area if you can do it without risk.

Firefighter Protection

As in any fire, wear self-contained breathing apparatus pressure-demand, MSHA/NIOSH (approved or equivalent) and full protective gear.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Emergency procedures

Do not touch or walk through spilled material. Stop leak if you can do it without risk. Avoid inhalation of asbestos dust.

Large spill

Dike to collect large liquid spills.

Environmental

Prevent entry into waterways, sewers, basements or confined areas.

Cleanup methods

Contain spillage, and then collect with non-combustible absorbent material, (e.g. sand, earth, diatomaceous earth, vermiculite) and place in container for disposal according to local / national regulations (see section 13). Clean contaminated surface thoroughly.

Materials: non-combustible absorbent material, (e.g. sand, earth, diatomaceous earth, vermiculite)

—

Related Products

Similar products with comparable safety profiles

X

X-OMAT EX II Developer and Replenisher, Part A

---

K

KODAK RP X-OMAT Developer Replenisher, Part B

---

G

GENOXONE ZX EC

---

G

GBD-9

CAS: 2864408-92-2

B

BONDERITE M-ZN 3410 R ZINC PHOSPHATE REPLENISHER

---

B

BONDERITE M-ZN 3410 R ZINC PHOSPHATE REPLENISHER

---

B

BONDERITE M-ZN 2798 R B ZINC PHOSPHATE REPLENISHER PA26KG

---

B

BONDERITE M-ZN 860XT R P ZINC PHOSPHATE REPLENISHER known as BONDERITE 8 60XT REPLENISHER P

---

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

Avoid contact with skin, eyes and clothing. Avoid breathing vapors or mists. Ensure adequate ventilation. Wash thoroughly after handling. Handle in accordance with good industrial hygiene and safety practice. In case of insufficient ventilation, wear suitable respiratory equipment. Wear personal protective equipment.

Storage

Keep containers tightly closed in a dry, cool and well-ventilated place. Keep in properly labeled containers.

Hygiene

Wash thoroughly after handling. Handle in accordance with good industrial hygiene and safety practice.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Language Code
---
Physical State
Liquid
Physical State Data
liquid
State Under Standard Conditions
---
Appearance
Liquid light yellow
Colour
light yellow
Colour Intensity
---
Form
---
Odor
Odorless
Odor Threshold
No information available
Ph
10.2
Melting Point
No information available
Boiling Point
> 100 °C
Flash Point
> 94 °C
Freezing Point
---
Softening Point
No information available
Solidification Point
---
Cloud Point
---
Crystallisation Point
---
Relative Evaporation Rate
---
Evaporation Rate
No information available
Vapor Pressure
24 mbar @ 20 °C
Vapor Density
0.6
Relative Density
1.230
Bulk Density
No information available
Density
---
Flammability
no data available
Upper Explosive Limit
---
Lower Explosive Limit
Not flammable
Explosive Limits
---
Auto Ignition Temperature
No information available
Decomposition Temperature
No information available
Solubility
---
Partition Coefficient
No information available
Solubility In Water
completely soluble
Solubility In Fat
---
Molecular Weight
No information available
Voc Content
---
Metal Corrosion
---
Dynamic Viscosity
No information available
Kinematic Viscosity
No information available
Properties Status
---
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Stability

Stable under recommended storage conditions.

Reactivity

Not applicable.

Hazardous reactions

Contact with strong acids liberates sulfur dioxide.

Avoid

None known.

Incompatible

None known based on information supplied.

Decomposition

Carbon oxides, Sulfur oxides.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

Ecotoxicity

Very toxic to aquatic life. | Chemical name | Toxicity to algae | Toxicity to fish | Toxicity to microorganisms | Toxicity to daphnia and other aquatic invertebrates | | --- | --- | --- | --- | --- |

The substance is classified as very toxic to aquatic life.

12.1 Toxicity

220 - 460: 96 h Leuciscus idus mg/L LC50 static

12.1 Toxicity

Diethylene glycol 111-46-6: 75200: 96 h Pimephales promelas mg/L LC50 flow-through; 84000: 48 h Daphnia magna mg/L EC50

12.1 Toxicity

Chemical name: Sodium sulfite 7757-83-7; Toxicity to fish: 220 - 460: 96 h Leuciscus idus mg/L LC50 static; Toxicity to daphnia and other aquatic invertebrates: 330: 24 h Psammechinus miliaris mg/L LC50

12.1 Toxicity

Chemical name: Hydroquinone 123-31-9; Toxicity to algae: 0.335: 72 h Pseudokirchneriella subcapitata mg/L EC50, 13.5: 120 h Desmodesmus subspicatus mg/L EC50; Toxicity to fish: 0.044: 96 h Oncorhynchus mykiss mg/L LC50 flow-through, 0.044: 96 h Pimephales promelas mg/L LC50 flow-through, 0.1 - 0.18: 96 h Pimephales promelas mg/L LC50 static, 0.17: 96 h Brachydanio rerio mg/L LC50; Toxicity to daphnia and other aquatic invertebrates: 0.29: 48 h Daphnia magna mg/L EC50

12.1 Toxicity

Chemical name: Sodium borate 1330-43-4 Toxicity to algae: 158: 96 h Desmodesmus subspicatus mg/L EC50 2.6 - 21.8: 96 h Pseudokirchneriella subcapitata mg/L EC50 static Toxicity to fish: 340: 96 h Limanda limanda mg/L LC50 Toxicity to daphnia and other aquatic invertebrates: 1085 - 1402: 48 h Daphnia magna mg/L LC50

Persistence and degradability

No data is available on the product itself. Expected to be readily biodegradable.

Bioaccumulation:

Mobility in soil

| Chemical name | log Pow | | --- | --- |

12.3 Bioaccumulative potential

Chemical name | log Pow Diethylene glycol 111-46-6 | -1.98

12.3 Bioaccumulative potential

log Pow: -4

12.3 Bioaccumulative potential

Chemical name: Hydroquinone 123-31-9, log Pow: 0.5
13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

Treatment

Dispose of in accordance with local regulations.

Disposal

Dispose of in accordance with local regulations.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What other names is GBX Developer and Replenisher known by?

GBX Developer and Replenisher is also known as: PCD 4861

What is the hazard signal word for GBX Developer and Replenisher?

The signal word is danger.

What is the physical form of GBX Developer and Replenisher?

GBX Developer and Replenisher is a liquid appearing as liquid light yellow with light yellow color. It has odorless odor.

What is GBX Developer and Replenisher used for?

Restricted to professional users. Photographic chemical.

What are the hazard statements for GBX Developer and Replenisher?

This substance has 5 hazard statements:

  • H317: May cause an allergic skin reaction
  • H318: Causes serious eye damage
  • H341: Suspected of causing genetic defects
  • H351: Suspected of causing cancer
  • H372: May cause damage to organs through prolonged or repeated exposure

What is the melting point of GBX Developer and Replenisher?

The melting point is No information available and the boiling point is > 100 °C.