Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- X-OMAT EX II Developer and Replenisher, Part A
- Product Code
- 4037172A
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
photographic chemical.
Uses advised against
No information available
Manufacturers & Suppliers
Carestream Health Australia Pty Ltd.
national supplier
27 Church Street, Richmond, Victoria, 3121
Emergency Contacts
Emergency Contact
+(61)-290372994
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS05
GHS08
GHS09
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
First Aid Measures
Emergency procedures for chemical exposure incidents
Move to fresh air in case of accidental inhalation of vapours. Get medical attention immediately if symptoms occur.
Wash off immediately with soap and plenty of water.
Immediately flush with plenty of water. After initial flushing, remove any contact lenses and continue flushing for at least 15 minutes. Call a physician immediately.
Do NOT induce vomiting. Never give anything by mouth to an unconscious person. Drink plenty of water. Get medical attention immediately if symptoms occur.
Medical Treatment
Treat symptomatically.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Use extinguishing measures that are appropriate to local circumstances and the surrounding environment.
None.
Thermal decomposition can lead to release of irritating gases and vapours.
Firefighter Protection
As in any fire, wear self-contained breathing apparatus and full protective gear.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Ensure adequate ventilation. Avoid contact with skin, eyes and clothing. Refer to protective measures listed in Sections 7 and 8.
Should not be released into the environment.
Sweep up and shovel into suitable containers for disposal.
Materials: inert absorbent material
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Ensure adequate ventilation. Avoid contact with skin, eyes and clothing.
Keep containers tightly closed in a dry, cool and well-ventilated place. Keep in properly labelled containers. Keep out of the reach of children.
Avoid contact with skin, eyes and clothing.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Showers, Eyewash stations, Ventilation systems.
Protective gloves.
Tightly fitting safety goggles.
When workers are facing concentrations above the exposure limit they must use appropriate certified respirators.
Long sleeved clothing.
Local authorities should be advised if significant spillages cannot be contained. Do not allow material to contaminate ground water system.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under normal conditions.
No dangerous reaction known under conditions of normal use.
Contact with strong acids liberates sulphur dioxide.
None known.
Oxidizing agents
Sulphur oxides.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- UN3082
- Shipping Name
- Environmentally hazardous substance, liquid, n.o.s
- Transport Class
- 9
- Packing Group
- III
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for X-OMAT EX II Developer and Replenisher, Part A?
The signal word is danger.
What is the physical form of X-OMAT EX II Developer and Replenisher, Part A?
X-OMAT EX II Developer and Replenisher, Part A is a liquid with light yellow color. It has odourless odor.
What is X-OMAT EX II Developer and Replenisher, Part A used for?
photographic chemical.
What are the hazard statements for X-OMAT EX II Developer and Replenisher, Part A?
This substance has 4 hazard statements:
- H318: Causes serious eye damage
- H341: Suspected of causing genetic defects
- H351: Suspected of causing cancer
- H400: Very toxic to aquatic life
What is the melting point of X-OMAT EX II Developer and Replenisher, Part A?
The melting point is No information available and the boiling point is 100 °C / 212 °F.