Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Optitrol ToRCH G
- Product Code
- SR13017, SR13019, SR13047, SR13049
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
In Vitro Diagnostic Use
Manufacturers & Suppliers
DiaMex GmbH
manufacturer
Siemensstrasse 38, 69123 Heidelberg, Germany
+49-6221-4166-400
Emergency Contacts
Emergency Contact
+49-6221-4166-400
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS07
Hazard Statements
Precautionary Statements
Still copying SDS data manually?Free
You don't have to. NextSDS reads this SDS and adds the information to your library automatically.
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
Chemical characterization Mixture
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Sodium azide EC: 247-852-1 | 26628-22-8 | 0.1% | Yes |
| 2-methyl-4-isothiazolin-3-one EC: 220-239-6 | 2682-20-4 | 0.013 - 0.015% | Yes |
Notes
For wording of the listed hazard statements, refer to section 16.
First Aid Measures
Emergency procedures for chemical exposure incidents
Supply fresh air and seek medical attention.
Wash affected area with soap and water. Take off any clothing that the product touched. Seek medical attention.
Symptoms: May cause an allergic skin reaction.
Rinse opened eye for several minutes under running water. Seek medical attention.
Seek medical attention and appropriate follow up.
Immediate Medical Attention
No relevant information available.
Medical Treatment
No relevant information available.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
CO2, extinguishing powder, water jet or alcohol-resistant foam.
There are no unique chemical or reactivity hazards that would impact firefighting decisions due to the chemicals in this product.
Firefighter Protection
Respiratory protection is normally not required.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Handle as a potentially infectious material. Minimize exposure by using appropriate personal protective equipment as listed in Section 8.
Do not allow to enter sewers, surface or ground water.
Clean the spill area carefully.
Materials: Absorb with liquid-binding material (sand, diatomite, acid binders, universal binders, sawdust). Suitable cleaners are: Disinfectant, warm water and cleansing agent.
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Handle as potentially infectious material. Avoid contact with skin.
See label or package insert.
No special measures required.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Gloves protect the user against splashes. For safety reasons, they should be changed immediately after wetting. This product is a preparation consisting of several substances. No specific information can be given regarding permeation breakthrough time. The choice of suitable gloves depends not only on the material, but also on other quality features and must be confirmed with the respective manufacturer. Per our knowledge, disposable gloves, e.g. made of nitriles, are suitable. This recommendation is not intended to replace a suitability test, which is essential and must be performed under the respective conditions of use.
Safety glasses
Not necessary if room is well ventilated.
Protective work clothing
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
No decomposition if used and stored according to specifications.
No relevant information available.
None known when used appropriately.
No relevant information available.
No relevant information available.
No dangerous decomposition products known.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
12.4 Mobility in soil
The product is classified as Water hazard class 1 (slightly hazardous for water) according to German regulations. It should not be allowed to reach ground water, water bodies, or the sewage system.
12.5 Results of PBT and vPvB assessment
12.6 Endocrine disrupting properties
The substance/mixture does not contain components considered to have endocrine disrupting properties at levels of 0.1% or higher.
12.7 Other adverse effects
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Dispose of waste in accordance to applicable local or national regulations.
Dispose of waste in accordance to applicable local or national regulations.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
No relevant information available.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Optitrol ToRCH G?
The signal word is warning.
What is the physical form of Optitrol ToRCH G?
Optitrol ToRCH G is a liquid with yellowish color. It has odourless odor.
What is Optitrol ToRCH G used for?
In Vitro Diagnostic Use
What are the hazard statements for Optitrol ToRCH G?
This substance has 1 hazard statement:
- H317: May cause an allergic skin reaction.
What is the melting point of Optitrol ToRCH G?
The melting point is No data available and the boiling point is No data available.