Aersopray® Gram Reagent B, Iodine

Remove person to fresh air and keep comfortable for breathing. Allow affected person to breathe fresh air. Allow the victim to rest.

Remove affected clothing and wash all exposed skin area with mild soap and water, followed by warm water rinse. Wash skin with plenty of water.

Rinse immediately with plenty of water. Obtain medical attention if pain, blinking or redness persists. Rinse eyes with water as a precaution.

Rinse mouth. Do NOT induce vomiting. Obtain emergency medical attention. Call a poison center or a doctor if you feel unwell.

Foam. Dry powder. Carbon dioxide. Water spray. Sand.

Do not use a heavy water stream.

Toxic fumes may be released.

Use water spray or fog for cooling exposed containers. Exercise caution when fighting any chemical fire. Prevent fire fighting water from entering the environment.

Ventilate spillage area. Evacuate unnecessary personnel.

Avoid release to the environment.

Take up liquid spill into absorbent material. Soak up spills with inert solids, such as clay or diatomaceous earth as soon as possible. Collect spillage. Store away from other materials.

Materials: inert solids, such as clay or diatomaceous earth

Ensure good ventilation of the work station. Wear personal protective equipment. Wash hands and other exposed areas with mild soap and water before eating, drinking or smoking and when leaving work. Provide good ventilation in process area to prevent formation of vapour.

Keep cool. Protect from sunlight. Store in a well-ventilated place. Keep cool.

Do not eat, drink or smoke when using this product. Always wash hands after handling the product. Wash hands and other exposed areas with mild soap and water before eating, drinking or smoking and when leaving work.

Ensure good ventilation of the work station.

Wear protective gloves. Suitable gloves should be tested to EN 374. The glove material has to be impermeable and resistant to the product/the substance/the preparation. As the product is a preparation of several substances, the resistance and penetration time/breakthrough time of the glove material cannot be calculated/observed in advance and, therefore, has to be checked prior to the application. The following are recommended: materials - natural latex or nitrile; thickness - 4 to 6 mils (0.1 mm - 0.15 mm); minimum breakthrough time - 60 minutes.

Chemical goggles or safety glasses. Safety glasses

Wear appropriate mask

Wear suitable protective clothing

Avoid release to the environment.

Not established.

The product is non-reactive under normal conditions of use, storage and transport.

Not established.

Direct sunlight. Extremely high or low temperatures.

Strong acids. Strong bases.

fume. Carbon monoxide. Carbon dioxide.

Dispose of contents/container in accordance with licensed collector's sorting instructions.

Dispose in a safe manner in accordance with local/national regulations.