Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Polishing Slurry DPS-M88
- Product Code
- BM000231-001
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Polishing material
Uses advised against
Not for use other than recommended applications.
Manufacturers & Suppliers
BAIKOWSKI JAPAN CO., LTD.
manufacturer
6-17-13 Higashinarashino Narashino-shi Chiba-ken 275-0001, Japan
+81 47 473 8150
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
GHS Pictograms
Still copying SDS data manually?Free
You don't have to. NextSDS reads this SDS and adds the information to your library automatically.
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Silicon dioxide | 7631-86-9 | 35 - 45% | No |
First Aid Measures
Emergency procedures for chemical exposure incidents
Remove person to fresh air and keep comfortable for breathing.
Wash with plenty of soap and water.
Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
Rinse the mouth. Do not induce vomiting.
Immediate Medical Attention
If eye irritation persists, seek medical advice and attention.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Incombustible under a general condition. Apply feasible methods for the surrounding fire. Ex. Dry chemical fire extinguisher, Alcohol resistance foam fire extinguisher, CO2, Sand, Water spray, etc.
Not Specified
Nonflammable, but high temperature/thermal decomposition could lead to release of hazardous aerosols/gases.
Cut off the source of combustion to the fire. Work from the windward direction when extinguishing fire. Move containers from the fire area if possible. If it is impossible to move the container, apply water to the surrounding area.
Firefighter Protection
Use personal protective equipment (full bunker gear) and positive pressure self-contained breathing apparatus.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Stop leakage if it can be done without risk.
Soak it up with an absorbent
Scoop up or pump spilled material after diking/containing it
Prevent discharge into rivers, sewers, and soil without proper treatment.
Scoop up or pump spilled material; Soak it up with an absorbent
Materials: absorbent
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Use appropriate protective equipment to avoid skin/eye contact, inhalation and ingestion. Seal the container after use. After handling, wash hands.
Store away from sunlight in a well-ventilated/cool (5-30°C) place.
After handling, wash hands.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under recommended storage conditions.
Not specified
Contact with incompatible materials or heat/fire could lead to release of hazardous aerosols/gases.
Direct sunlight, Heat, Flame, Spark, Static electricity, Freezing, Evaporation to dryness
Acids, Bases, Oxidizing agents, Reducing agents
Carbon monoxide, Carbon dioxide, Nitrogen oxides, etc.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
12.1 Toxicity
No information available
12.2 Persistence and degradability
No information available
12.3 Bioaccumulative potential
No information available
12.4 Mobility in soil
No information available
12.5 Results of PBT and vPvB assessment
12.6 Endocrine disrupting properties
12.7 Other adverse effects
No information available
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Discard in accordance with the standards of the local government and relevant legislation. Delegate to an industrial waste disposal contractor receiving the permission of the prefectural governor.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Follow the description in section 7. Check no leak of container, handle without overturning, falling and damaging, then reliably prevent from cargo shift.
Follow the description in section 7. Check no leak of container, handle without overturning, falling and damaging, then reliably prevent from cargo shift.
Follow the description in section 7. Check no leak of container, handle without overturning, falling and damaging, then reliably prevent from cargo shift.
Regulatory Information
Chemical regulations, safety assessments, and compliance status
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Polishing Slurry DPS-M88?
The signal word is no signal word.
What is the physical form of Polishing Slurry DPS-M88?
Polishing Slurry DPS-M88 is a liquid with white color. It has no information available odor.
What is the solubility of Polishing Slurry DPS-M88?
No information available
What is Polishing Slurry DPS-M88 used for?
Polishing material
What is the melting point of Polishing Slurry DPS-M88?
The melting point is No information available and the boiling point is 100°C.