Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Glycerol bidistilled 99.5% AnalaR NORMAPUR® Reag. USP, ACS
- Product Code
- 24388
Regulatory Identifiers
- CAS Number
- 56-81-5 Check regulations →
- REACH No.
- 01-2119471987-18-XXXX
Identified Uses
General chemical reagent
Manufacturers & Suppliers
VWR International Ltd.
national supplier
Hunter Boulevard, Magna Park, Lutterworth, LE17 4XN
0800 22 33 44
Emergency Contacts
CareChem24
+44 (0) 1270 502894
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
GHS Pictograms
Still copying SDS data manually?Free
You don't have to. NextSDS reads this SDS and adds the information to your library automatically.
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Glycerine | 56-81-5 | --- | No |
First Aid Measures
Emergency procedures for chemical exposure incidents
Remove casualty to fresh air and keep warm and at rest. If breathing is irregular or stopped, administer artificial respiration.
Symptoms: respiratory tract irritation
After contact with skin, wash immediately with plenty of water and soap. Remove contaminated, saturated clothing immediately.
Symptoms: skin reactions
In case of contact with eyes flush immediately with plenty of flowing water for 10 to 15 minutes holding eyelids apart. Protect uninjured eye. Remove contact lenses, if present and easy to do. Continue rinsing.
If accidentally swallowed rinse the mouth with plenty of water (only if the person is conscious).
Immediate Medical Attention
In case of respiratory tract irritation, consult a physician. In case of skin reactions, consult a physician. In case of contact with eyes, consult an ophthalmologist. If accidentally swallowed, obtain immediate medical attention.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
The product itself does not burn. Co-ordinate fire-fighting measures to the fire surroundings.
no restriction
In case of fire may be liberated: Carbon monoxide, Carbon dioxide (CO2)
DO NOT fight fire when fire reaches explosives.
Firefighter Protection
Wear a self-contained breathing apparatus and chemical protective clothing.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Remove persons to safety.
Discharge into the environment must be avoided.
Collect in closed and suitable containers for disposal.
Related Products
Similar products with comparable safety profiles
Ethanol absolute AnalaR NORMAPUR® Reag. Ph. Eur., Reag. USP, ACS
CAS: 64-17-5
Acetone AnalaR NORMAPUR® Reag. Ph. Eur., Reag. USP, ACS
CAS: 67-64-1
Nitric acid 69% AnalaR NORMAPUR® Reag. Ph.Eur., ACS
CAS: 7697-37-2
Glycerine ROTIPURAN® ≥99,5 %, p.a., anhydrous
CAS: 56-81-5
Butan-1-ol AnalaR NORMAPUR® Reag. Ph.Eur., ACS
CAS: 71-36-3
Nitric acid 65% AnalaR NORMAPUR®
CAS: 7697-37-2
Nitric acid 68% AnalaR NORMAPUR®
CAS: 7697-37-2
Methanol AnalaR NORMAPUR® Reag. Ph.Eur., ACS Analytical Reagent
CAS: 67-56-1
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
All work processes must always be designed so that the following is as low as possible: Inhalation, skin contact, Eye contact.
Keep container tightly closed and in a well-ventilated place. Keep/Store only in original container.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Technical measures and the application of suitable work processes have priority over personal protection equipment. If handled uncovered, arrangements with local exhaust ventilation have to be used.
When handling with chemical substances, protective gloves must be worn with the CE-label including the four control digits. Recommended glove articles DIN-/EN-Norms: EN ISO 374 In the case of wanting to use the gloves again, clean them before taking off and air them well. By short-term hand contact: Suitable material: NBR (Nitrile rubber), Thickness of the glove material: 0,12 mm, Breakthrough time (maximum wearing time): > 480 min, Recommended glove articles: VWR 112-0998. By long-term hand contact: Suitable material: NBR (Nitrile rubber), Thickness of the glove material: 0,38 mm, Breakthrough time (maximum wearing time): > 480 min, Recommended glove articles: VWR 112-3717 / 112-1381.
Eye glasses with side protection DIN-/EN-Norms: DIN EN 166. Recommendation: VWR 111-0432
Usually no personal respirative protection necessary.
Wear suitable protective clothing. When handling with chemical substances, protective clothing with CE-labels including the four control digits must be worn.
no data available
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
The product is chemically stable under standard ambient conditions (room temperature).
no data available
no data available
no data available
no data available
no data available
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
12.1 Ecotoxicity
12.1 Ecotoxicity
12.1 Toxicity
12.2 Persistence and degradability
12.3 Bioaccumulative potential
12.3 Bioaccumulative potential
12.4 Mobility in soil
12.5 Results of PBT/vPvB assessment
12.6 Other adverse effects
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Dispose according to local legislation. Consult the appropriate local waste disposal expert about waste disposal.
Dispose according to local legislation. Consult the appropriate local waste disposal expert about waste disposal.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Glycerol bidistilled 99.5% AnalaR NORMAPUR® Reag. USP, ACS?
The signal word is no signal word.
What is the physical form of Glycerol bidistilled 99.5% AnalaR NORMAPUR® Reag. USP, ACS?
Glycerol bidistilled 99.5% AnalaR NORMAPUR® Reag. USP, ACS is a liquid with colourless color. It has no data available odor.
What is Glycerol bidistilled 99.5% AnalaR NORMAPUR® Reag. USP, ACS used for?
General chemical reagent
What is the melting point of Glycerol bidistilled 99.5% AnalaR NORMAPUR® Reag. USP, ACS?
The melting point is 18.6 °C and the boiling point is 290 °C (1013 hPa).