Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Polarshine E3 Glass Polishing Compound
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Polishing agent
Uses advised against
None known.
Manufacturers & Suppliers
Mirka (UK) Ltd
national supplier
Saxon House, Shirwell Crescent, Furzton Lake, MK4 1GA Milton Keynes / GREAT BRITAIN
+44 (0)1908 866100
http://www.mirka.com
Emergency Contacts
CHEMTREC
+1 800 424 9300
CHEMTREC
+1 703 527 3887
CHEMTREC UK
+(44)-870-8200418
EN
CHEMTREC Ireland
+(353)-19014670
EN
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Rare earth oxides EC: 269-164-0 | --- | 5 - 10% | No |
| Rare earth fluorides EC: 269-166-1 | --- | 1 - 5% | No |
| 1,2-benzisothiazol-3(2H)-one EC: 220-120-9 | 2634-33-5 | 0.005 - 0.05% | No |
Notes
Substances of Very High Concern - SVHC: substances are not contained or are below 0.1%. For full text of H-statements: see SECTION 16.
First Aid Measures
Emergency procedures for chemical exposure incidents
Ensure supply of fresh air.
When in contact with the skin, clean with soap and water. If skin irritation or rash occurs: Get medical advice/attention.
Symptoms: skin irritation or rash
Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. If eye irritation persists: Get medical advice/attention.
Get medical advice. Do not induce vomiting. Rinse out mouth and give plenty of water to drink.
Immediate Medical Attention
Get medical advice if skin irritation or rash occurs, if eye irritation persists, or if ingested.
Medical Treatment
Treat symptomatically. Forward this sheet to your doctor.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
All extinguishing media are suitable but method must take into account the surrounding area to minimize dispersion.
Full water jet.
Risk of formation of toxic pyrolysis products.
Do not inhale explosion and/or combustion gases.
Firefighter Protection
Use self-contained breathing apparatus.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Ensure adequate ventilation. High risk of slipping due to leakage/spillage of product.
Prevent spread over a wide area (e.g. by containment or oil barriers). Do not discharge into the drains/surface waters/groundwater.
Take up with absorbent material (e.g. general-purpose binder).
Materials: absorbent material (e.g. general-purpose binder)
Related Products
Similar products with comparable safety profiles
GLASS POLISHING COMPOUND POLISHING SOLUTION
---
Remint Polishing Compound H
---
STARKE CRYSTAL CLEAR GLASS POLISH
---
Metal Polish
UFI: SJPV-J00T-A000-Q6FM
3M™ Finesse-It™ Polish - Final Finish
---
SILVERSHINE 412 Aluminium Paste
---
STAINLESS STEEL CLEANER & POLISH
---
Stainless Steel Cleaner & Polish
---
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Avoid contact with eyes and skin. Use personal protective equipment.
Keep container tightly closed. Keep away from frost.
Do not eat, drink or smoke when using this product. Wash hands before breaks and after work. Use barrier skin cream.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Ensure adequate ventilation on workstation. Measurement methods for taking workplace measurements must meet the performance requirements of DIN EN 482. For example, recommendations are given in the IFA's list of hazardous substances.
The details concerned are recommendations. Please contact the glove supplier for further information. In full contact: 0.4 mm: Butyl rubber, >480 min (EN 374-1/-2/-3). In splash contact: 0.4 mm: Nitrile rubber, >480 min (EN 374-1/-2/-3).
If there is a risk of splashing: Safety glasses. (EN 166:2001)
In the event of occupational exposure limits being exceeded or of inadequate ventilation: wear appropriate respiratory protection. Short term: filter apparatus, combination filter A-P1. (DIN EN 14387)
Protective clothing (EN 340)
Comply with applicable environmental regulations limiting discharge to air, water and soil.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under normal ambient conditions (ambient temperature).
No dangerous reactions known if used as directed.
Reactions with oxidizing agents.
Strong heating.
No information available.
No decomposition if used and stored according to specifications.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Waste material must be disposed of in accordance with the Directive on waste 2008/98/EC as well as other national and local regulations.
Dispose of as hazardous waste. Coordinate disposal with the authorities if necessary.
Waste Codes
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- Shipping Name
- NO DANGEROUS GOODS
Regulatory Information
Chemical regulations, safety assessments, and compliance status
Safety, health and environmental regulations/legislation specific for the substance or mixture
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Polarshine E3 Glass Polishing Compound?
The signal word is no signal word.
What is the physical form of Polarshine E3 Glass Polishing Compound?
Polarshine E3 Glass Polishing Compound is a liquid with red-brown color. It has odourless odor.
What is the solubility of Polarshine E3 Glass Polishing Compound?
No information available.
What is Polarshine E3 Glass Polishing Compound used for?
Polishing agent
What is the melting point of Polarshine E3 Glass Polishing Compound?
The melting point is No information available. and the boiling point is No information available..