Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- BD FACS™ Lysing Solution
- Product Code
- 349202
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Scientific and industrial laboratory use. For In Vitro Diagnostic Use.
Uses advised against
None known.
Manufacturers & Suppliers
Becton Dickinson France S.A.S. Belgian Branch
manufacturer
Erembodegem-Dorp 86, 9320 Erembodegem, Belgium
32 2 400 98 95
Emergency Contacts
Emergency Contact
32 2 400 98 95
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS05
GHS07
GHS08
Hazard Statements
Precautionary Statements
Still copying SDS data manually?Free
You don't have to. NextSDS reads this SDS and adds the information to your library automatically.
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
First Aid Measures
Emergency procedures for chemical exposure incidents
Move the exposed person to fresh air at once. Get medical attention immediately.
Wash off promptly and flush contaminated skin with water. Promptly remove clothing if soaked through and flush skin with water. Get medical attention immediately.
Important! Immediately rinse with water for at least 15 minutes. Get medical attention immediately. Continue to rinse.
If swallowed, rinse mouth with water (only if the person is conscious). Call a physician or poison control center immediately.
Immediate Medical Attention
Get immediate medical advice/attention. Get medical attention immediately. Get medical attention immediately. Get medical attention immediately. Call a physician or poison control center immediately.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Water spray, fog, CO2, dry chemical, or alcohol resistant foam.
Avoid water in straight hose stream; will scatter and spread fire.
Fire or excessive heat may produce hazardous decomposition products.
No unusual fire or explosion hazards noted.
Firefighter Protection
Firefighters must use standard protective equipment including flame retardant coat, helmet with face shield, gloves, rubber boots, and in enclosed spaces, SCBA.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Ensure suitable personal protection (including respiratory protection) during removal of spillages in a confined area.
Contact local authorities in case of spillage to drain/aquatic environment.
Sweep up and place in a clearly labeled container for chemical waste.
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Do not breathe dust/fume/gas/mist/vapors/spray. Do not get in eyes, on skin, on clothing. Do not eat, drink or smoke when using the product. Read and follow manufacturer's recommendations. Wash promptly with soap and water if skin becomes contaminated. Use personal protective equipment as required.
Store in tightly closed original container in a dry, cool and well-ventilated place. Should be stored separately from oxidizers, bases, and food chemical substances Keep in a cool, ventilated location far from heat source and flame
Do not eat, drink or smoke when using the product. Wash promptly with soap and water if skin becomes contaminated.
Keep in a cool, ventilated location far from heat source and flame
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Adequate ventilation should be provided so that exposure limits are not exceeded.
Material: Use suitable protective gloves if risk of skin contact.
Wear safety glasses with side shields (or goggles). A - Safety Glasses
If engineering controls do not maintain airborne concentrations below recommended exposure limits (where applicable) or to an acceptable level (in countries where exposure limits have not been established), an approved respirator must be worn.
Wear appropriate clothing to prevent reasonably probable skin contact. Wear chemical-resistant gloves and protective clothing appropriate for the risk of exposure. Recommended gloves:
Data available upon request.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
No data available.
No data available.
Do not subject to grinding/shock/friction/. Contact with acids and metals can lead to violent decomposition.
grinding/shock/friction/
acids and metals
By fire, toxic gases may be formed (COx, NOx).
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
12.1 Toxicity
12.1 Toxicity
12.1 Toxicity
12.1 Toxicity
12.1 Toxicity
12.1 Toxicity
12.1 Toxicity
12.1 Toxicity
12.1 Toxicity
Not expected to be harmful to aquatic organisms.
12.1 Toxicity
12.1 Toxicity
Harmful to aquatic organisms, may cause long-term adverse effects in the aquatic environment.
12.1 Toxicity
12.2 Persistence and degradability
12.3 Bioaccumulative potential
12.4 Mobility in soil
12.5 Results of PBT and vPvB assessment
12.6 Endocrine disrupting properties
12.7 Other adverse effects
12.1 Toxicity
12.2 Persistence and Degradability
No data available.
12.2 Persistence and Degradability
12.2 Persistence and Degradability
12.2 Persistence and Degradability
12.3 Bioaccumulative potential
No data available for the product. Components listed: Ethanol, 2,2'-oxybis-.
12.3 Bioaccumulative potential
Formaldehyde will not bio-accumulate.
12.3 Bioaccumulative potential
12.3 Bioaccumulative potential
12.4 Mobility in soil
No data available.
12.5 Results of PBT and vPvB assessment
No data available.
12.5 Results of PBT and vPvB assessment
Methanol does not fulfill PBT (persistent/bioaccumulative/toxic) criteria or vPvB (very persistent/very bioaccumulative) criteria.
12.6 Other adverse effects
No data available.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Dispose of waste at a facility with special permission to dispose industrial wastes subject to special control. Waste should be accompanied by a manifest for the industrial wastes.
This material and its container must be disposed of as hazardous waste.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
EU. REACH Annex XIV, Substances Subject to Authorization: None present or none present in regulated quantities. EU. REACH Candidate List of Substances of Very High Concern for Authorization (SVHC): None present or none present in regulated quantities. EU. Regulation 2019/1021/EU on persistent organic pollutants (POPs) (recast), as amended: None present or none present in regulated quantities. Regulation 1005/2009/EC on substances that deplete the ozone layer, Annex I, Controlled Substances: None present or none present in regulated quantities. Regulation 1005/2009/EC on substances that deplete the ozone layer, Annex II, New Substances: None present or none present in regulated quantities.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for BD FACS™ Lysing Solution?
The signal word is danger.
What is the physical form of BD FACS™ Lysing Solution?
BD FACS™ Lysing Solution is a liquid appearing as colorless to yellow with colorless to yellow color. It has slight odor odor.
What is the solubility of BD FACS™ Lysing Solution?
Soluble
What is BD FACS™ Lysing Solution used for?
Scientific and industrial laboratory use. For In Vitro Diagnostic Use.
What are the hazard statements for BD FACS™ Lysing Solution?
This substance has 8 hazard statements:
- H302 + H312 + H332: Harmful if swallowed, in contact with skin or if inhaled.
- H314: Causes severe skin burns and eye damage.
- H317: May cause an allergic skin reaction.
- H335: May cause respiratory irritation.
- H341: Suspected of causing genetic defects.
- H350: May cause cancer.
- H370: Causes damage to organs.
- H373: May cause damage to organs through prolonged or repeated exposure.