Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Dipentylamine, mixture of isomers
- Product Code
- 338699
Regulatory Identifiers
- CAS Number
- 2050-92-2 Check regulations →
Identified Uses
Laboratory chemicals, Synthesis of substances
Manufacturers & Suppliers
Sigma-Aldrich
manufacturer
3050 Spruce Street, SAINT LOUIS MO 63103, USA
+1 800-325-5832
Emergency Contacts
CHEMTREC
+1-703-527-3887
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS06
GHS05
GHS09
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| dipentylamine EC: 218-108-3 | 2050-92-2 | 100% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
If breathed in, move person into fresh air. If not breathing, give artificial respiration. Consult a physician.
Take off contaminated clothing and shoes immediately. Wash off with soap and plenty of water. Take victim immediately to hospital. Consult a physician.
Rinse thoroughly with plenty of water for at least 15 minutes and consult a physician. Continue rinsing eyes during transport to hospital.
Do NOT induce vomiting. Never give anything by mouth to an unconscious person. Rinse mouth with water. Consult a physician.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
The data for this section has not been processed yet.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
The data for this section has not been processed yet.
Related Products
Similar products with comparable safety profiles
4,4'-Methylenebis(2-methylcyclohexylamine), mixture of isomers
CAS: 6864-37-5
Diphenylamine
CAS: 122-39-4
Diisopropylamine
CAS: 108-18-9
Dicyclohexylamine
CAS: 101-83-7
Diisopropanolamine
CAS: 110-97-4
Di(propylene glycol) methyl ether, mixture of isomers
CAS: 34590-94-8
Di(propylene glycol) methyl ether acetate, mixture of isomers
CAS: 88917-22-0
Diisobutylamine
CAS: 110-96-3
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
The data for this section has not been processed yet.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Avoid contact with skin, eyes and clothing. Wash hands before breaks and immediately after handling the product.
Handle with gloves. Gloves must be inspected prior to use. Use proper glove removal technique (without touching glove's outer surface) to avoid skin contact with this product. Dispose of contaminated gloves after use in accordance with applicable laws and good laboratory practices. Wash and dry hands.
Tightly fitting safety goggles. Faceshield (8-inch minimum). Use equipment for eye protection tested and approved under appropriate government standards such as NIOSH (US) or EN 166(EU).
Where risk assessment shows air-purifying respirators are appropriate use a full-face respirator with multi-purpose combination (US) or type ABEK (EN 14387) respirator cartridges as a backup to engineering controls. If the respirator is the sole means of protection, use a full-face supplied air respirator. Use respirators and components tested and approved under appropriate government standards such as NIOSH (US) or CEN (EU).
Complete suit protecting against chemicals, The type of protective equipment must be selected according to the concentration and amount of the dangerous substance at the specific workplace.
Prevent further leakage or spillage if safe to do so. Do not let product enter drains. Discharge into the environment must be avoided.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
The data for this section has not been processed yet.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 2841
- Shipping Name
- Di-n-amylamine
- Transport Class
- 3 (6.1)
- Packing Group
- III
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Dipentylamine, mixture of isomers?
The signal word is danger.
What is the physical form of Dipentylamine, mixture of isomers?
Dipentylamine, mixture of isomers is a liquid appearing as no data available . It has no data available odor.
What is the solubility of Dipentylamine, mixture of isomers?
No data available
What is Dipentylamine, mixture of isomers used for?
Laboratory chemicals, Synthesis of substances
What are the hazard statements for Dipentylamine, mixture of isomers?
This substance has 4 hazard statements:
- H227: Combustible liquid.
- H301: Toxic if swallowed, in contact with skin or if inhaled
- H314: Causes severe skin burns and eye damage.
- H410: Very toxic to aquatic life with long lasting effects.
What is the melting point of Dipentylamine, mixture of isomers?
The melting point is - 7.85 ℃ (17.87 ºF) and the boiling point is 202 - 203 ℃ (396 - 397 ºF).