FARECLA G10 FINISHING COMPOUND

Remove person to fresh air and keep comfortable for breathing. Call a POISON CENTER/doctor if you feel unwell.

Gently wash with plenty of soap and water. If skin irritation occurs: Get medical advice/attention. Wash contaminated clothing before reuse.

Symptoms: Contact during a long period may cause light irritation.

Rinse eyes with water as a precaution. Remove contact lenses, if present and easy to do. Continue rinsing. If eye irritation persists: Get medical advice/attention.

Symptoms: slight irritation. redness, itching, tears.

Rinse mouth out with water. Do not induce vomiting. Call a poison center or a doctor if you feel unwell. Never give anything by mouth to an unconscious person.

Symptoms: May cause irritation to the digestive tract.

Water spray. Dry powder. Foam. Carbon dioxide.

None known.

No fire hazard. Product is not explosive. On exposure to high temperature, may decompose, releasing toxic vapours.

Eliminate all ignition sources if safe to do so. Evacuate area. Exercise caution when fighting any chemical fire. Fight fire with normal precautions from a reasonable distance. In case of fire: stop leak if safe to do so. Get the package away from the fire if this can be done without risk.

Stop leak if safe to do so. Isolate from fire, if possible, without unnecessary risk. Ventilate spillage area. Avoid contact with skin and eyes. Keep upwind. Evacuate area.

Avoid release to the environment.

Absorb spilled material with sand or earth. Shovel or sweep up and put in a closed container for disposal. Clean contaminated surfaces with an excess of water.

Materials: sand or earth

Ensure good ventilation of the work station. Wear personal protective equipment.

Store in a well-ventilated place. Keep cool. Keep at temperatures above freezing. Allowing freezing conditions may degrade product.

Do not eat, drink or smoke when using this product. Always wash hands after handling the product.

Ensure good ventilation of the work station. Emergency eye wash fountains and safety showers should be available in the immediate vicinity of any potential exposure.

Examples of preferred glove barrier materials include: Butyl rubber. Natural rubber ("latex"). Neoprene. Nitrile/butadiene rubber ("nitrile" or "NBR"). Polyethylene. Ethyl vinyl alcohol laminate ("EVAL"). Polyvinyl alcohol ("PVA"). Polyvinyl chloride ("PVC" or "vinyl").

Safety glasses. Chemical goggles or safety glasses

In case of insufficient ventilation, wear suitable respiratory equipment. The fine-dust mask with exhale Valve is recommended to use when dust and mist exceed exposure limits in air, according to EN149:2001 + A1:2009 FFP2 NR standard. The respiratory mask should be worn when respiratory hazards has been identified and evaluated. Respiratory protection should be always determined on quantitative exposure assessments.

Wear suitable protective clothing

Avoid release to the environment. Prevent entry into waterways, sewers, basements or confined areas.

Stable under normal conditions.

The product is non-reactive under normal conditions of use, storage and transport.

No dangerous reactions known under normal conditions of use.

None under recommended storage and handling conditions (see section 7).

Strong acids. Strong bases. Strong oxidizers.

Under normal conditions of storage and use, hazardous decomposition products should not be produced.

Dispose of contents/container in accordance with licensed collector's sorting instructions.

Comply with applicable regulations for solid waste disposal.