MasterFinish RL 211 also RHEOFINISH 211

If difficulties occur after vapour/aerosol has been inhaled, remove to fresh air and seek medical attention.

After contact with skin, wash immediately with plenty of water and soap. Under no circumstances should organic solvent be used. If irritation develops, seek medical attention.

Wash affected eyes for at least 15 minutes under running water with eyelids held open, consult an eye specialist.

Rinse mouth immediately and then drink plenty of water, seek medical attention. Do not induce vomiting unless told to by a poison control center or doctor.

foam, water spray, dry powder, carbon dioxide

water jet

Carbon dioxide, carbon monoxide, harmful vapours, nitrogen oxides, fumes/smoke, carbon black

If exposed to fire, keep containers cool by spraying with water.

If exposed to high vapour concentration, leave area immediately. Handle in accordance with good building materials hygiene and safety practice.

Pick up with inert absorbent material (e.g. sand, earth etc.). Dispose of contaminated material as prescribed.

Pump off product.

Contain contaminated water/firefighting water. Do not discharge into drains/surface waters/groundwater.

Pick up with inert absorbent material (e.g. sand, earth etc.). Pump off product.

Materials: inert absorbent material (e.g. sand, earth etc.)

Wear respiratory protection when spraying. Avoid inhalation of mists/vapours. Avoid skin contact. Wear suitable protective clothing and eye/face protection.

Keep only in the original container in a cool, dry, well-ventilated place away from ignition sources, heat or flame. Protect from direct sunlight.

No special measures necessary provided product is used correctly.

Keep away from ignition sources, heat or flame.

impermeable gloves, Synthetic rubber gloves. Manufacturer's directions for use should be observed because of great diversity of types. Gloves must be inspected regularly and prior to each use. Replace if necessary (e.g. pinhole leaks).

Safety glasses with side-shields (frame goggles) (e.g. EN 166)

Wear respiratory protection if ventilation is inadequate. Combination filter for gases/vapours of organic, inorganic, acid inorganic and alkaline compounds (e.g. EN 14387 Type ABEK).

light protective clothing

The product is stable if stored and handled as prescribed/indicated.

No hazardous reactions if stored and handled as prescribed/indicated. Corrosion to metals: No corrosive effect on metal.

The product is stable if stored and handled as prescribed/indicated.

See MSDS section 7 - Handling and storage.

strong acids, strong bases, strong oxidizing agents, strong reducing agents

No hazardous decomposition products if stored and handled as prescribed/indicated.

Observe national and local legal requirements. Residues should be disposed of in the same manner as the substance/product.

Residues should be disposed of in the same manner as the substance/product.