Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- LGMT 2
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Lubricant.
Uses advised against
None.
Manufacturers & Suppliers
SKF UK Ltd
national supplier
400 Capability Green, LU1 3LU, Luton
+44 1582 490049
www.skf.com
Emergency Contacts
NHS 111 (Scotland: NHS 24)
111
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS07
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Naphthenic acids, zinc salts, basic EC: 282-762-6 | 84418-50-8 | 1.2% | Yes |
| Benzenamine, N-phenyl-, reaction products with 2,4,4-trimethylpentene EC: 270-128-1 | 68411-46-1 | 0.25% | Yes |
Notes
The mineral oils in the product contain <3% DMSO extract(IP 346).
First Aid Measures
Emergency procedures for chemical exposure incidents
Seek fresh air. Seek medical advice in case of persistent discomfort.
Remove contaminated clothing. Wash skin with soap and water. Seek medical advice in case of persistent discomfort.
Symptoms: reddening, swelling, blistering and ulceration - often slowly developing.
Flush with water (preferably using eye wash equipment) until irritation subsides. Seek medical advice if symptoms persist.
Wash out mouth thoroughly and drink 1-2 glasses of water in small sips. Seek medical advice in case of discomfort.
Immediate Medical Attention
Treat symptoms. No special immediate treatment required.
Medical Treatment
Treat symptoms.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Extinguish with powder, foam or water mist. Use water or water mist to cool non-ignited stock.
Do not use water stream, as it may spread the fire.
Not flammable, but combustible. Product decomposes in fire conditions or when heated to high temperatures, and inflammable and toxic gases may be released.
Use water or water mist to cool non-ignited stock.
Firefighter Protection
Wear Self-Contained Breathing Apparatus (SCBA) with chemical resistant gloves.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Stay upwind/keep distance from source.
Wipe up minor spills with a cloth.
Prevent spillage from entering drains and/or surface water.
Contain and absorb spill with sand or other absorbent material and transfer to suitable waste containers. Wipe up minor spills with a cloth.
Materials: sand or other absorbent material, cloth
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Running water and eye wash equipment must be available. Wash hands before breaks, before using restroom facilities, and at the end of work.
The product should be stored safely out of reach of children and not together with food, feed, medicine and the like. Keep in tightly closed original packaging. Do not store with the following: Strong oxidisers. Do not expose to heat (e.g. sunlight).
Wash hands before breaks, before using restroom facilities, and at the end of work.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Use the product under well-ventilated conditions.
Wear gloves. Type of material: Nitrile rubber. Breakthrough time has not been determined for the product. Change gloves often. Gloves must conform to EN 374. The suitability and durability of a glove is dependant on usage, e.g. frequency and duration of contact, glove material thickness, functionality and chemical resistance. Always seek advice from the glove supplier.
Wear safety goggles if there is a risk of eye splash. Eye protection must conform to EN 16321.
Not required. In case of risk of formation of spray mist, wear respiratory protective equipment with P2 filter. Respiratory protection must conform to one of the following standards: EN 136/140/145.
Ensure compliance with local regulations for emissions.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
The product is stable when used in accordance with the supplier's directions.
Reacts with the following: Strong oxidisers.
None known.
Avoid heating and contact with ignition sources.
Strong oxidisers.
None, if stored at the recommended storage conditions.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Avoid discharge to drain or surface water.
Waste Codes
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- Not applicable
- Shipping Name
- Not applicable
- Transport Class
- Not applicable
- Packing Group
- Not applicable
Regulatory Information
Chemical regulations, safety assessments, and compliance status
Special care should be applied for employees under the age of 18. Young people under the age of 18 may not carry out any work causing harmful exposure to this product.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for LGMT 2?
The signal word is warning.
What is the physical form of LGMT 2?
LGMT 2 is a paste / fat. with red color. It has no data odor.
What is the solubility of LGMT 2?
Not miscible with the following: Water.
What is LGMT 2 used for?
Lubricant.
What are the hazard statements for LGMT 2?
This substance has 1 hazard statement:
- H317: May cause an allergic skin reaction.
What is the melting point of LGMT 2?
The melting point is No data and the boiling point is No data.