NextSDS Logo
Safety Data Sheet EN

Kane Ace PA121, PA210, PA220, PA310, PA600, PA610, PA630, PA650

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report.

Get Free Audit
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
Kane Ace PA121, PA210, PA220, PA310, PA600, PA610, PA630, PA650
Chemical Name
Acrylic polymer

Regulatory Identifiers

CAS Number
N/A

Identified Uses

Industrial use; Manufacture of plastic materials

Manufacturers & Suppliers

K

Kaneka Belgium NV

manufacturer

Nijverheidsstraat 16, 2260 Westerlo-Oevel, Belgium

+32-14-25 78 00

Emergency Contacts

Kaneka Belgium NV

+32-14-25 78 00

24 hours per day, 7 days per week

Kaneka Belgium NV

+32-14-25 78 10

24 hours per day, 7 days per week

National Poisons Information Centre, Beaumont Hospital

+35 318 37 99 64

National Poisons Information Service

0870 600 6266

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified no signal word

Hazard Classifications

Not Classified

GHS Pictograms

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report

Free Audit
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type mixture
Chemical Name CAS Number Concentration Hazardous
Acrylic polymer --- 98% No
Benzenesulfonic acid, C10-13-alkyl derivs., sodium salts EC: 270-115-0 68411-30-3 0.1 - 2% Yes
04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

Remove person to fresh air. If signs/symptoms continue, get medical attention.

Symptoms: May cause nose, throat, and lung irritation. (dust).

Skin contact

Wash off immediately with soap and plenty of water. Get medical attention if symptoms occur.

Symptoms: Contact with dust can cause mechanical irritation or drying of the skin.

Eye contact

Rinse immediately with plenty of water, also under the eyelids, for at least 15 minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Get medical attention if symptoms occur.

Symptoms: Dust contact with the eyes can lead to mechanical irritation.

Ingestion

Get medical attention immediately. Rinse mouth. Induce vomiting if person is conscious. Never give anything by mouth to an unconscious person or a person with cramps.

Symptoms: This product has no known adverse effect on human health. Non-hazardous substance.

Immediate Medical Attention

Get medical attention immediately (ingestion). Get medical attention if symptoms occur (inhalation, skin, eye).

Medical Treatment

Treat symptomatically.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

Use water spray, alcohol-resistant foam, dry chemical or carbon dioxide.

Unsuitable media

Strong water jet. Do not use a solid water stream as it may scatter and spread fire.

Specific hazards

Combustible material. May form explosive dust-air mixture.

Instructions

In the event of fire, cool tanks with water spray.

Firefighter Protection

Special protective equipment for firefighters. In case of fire: Wear self-contained breathing apparatus.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Emergency procedures

Provide adequate ventilation. Evacuate area. Use personal protective equipment as required. Do not breathe dust. Avoid contact with skin, eyes and clothes. Keep away from heat/sparks/open flames/hot surfaces. - No smoking. Avoid dust formation.

Environmental

Should not be released into the environment.

Cleanup methods

Sweep up or vacuum up spillage and collect in suitable container for disposal.

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

Provide adequate ventilation. Use personal protective equipment as required. Do not breathe dust. Avoid contact with skin, eyes and clothes. Avoid dust formation. Keep away from heat/sparks/open flames/hot surfaces. - No smoking. Take precautionary measures against static discharges. Take any precaution to avoid mixing with incompatible materials. Do not allow to enter into surface water or drains.

Storage

Keep containers tightly closed in a dry, cool and well-ventilated place. Keep away from direct sunlight. Keep away from heat/sparks/open flames/hot surfaces. - No smoking. Do not store near or with any of the incompatible materials listed in section 10.

Hygiene

Handle in accordance with good industrial hygiene and safety practice. Wash hands and face before breaks and immediately after handling of the product. When using do not eat, drink or smoke. Take off contaminated clothing and wash before reuse.

Fire prevention

Keep away from heat/sparks/open flames/hot surfaces. - No smoking.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

Engineering

Use only in area provided with appropriate exhaust ventilation. Apply measures to prevent dust explosions. Provide adequate precautions, such as electrical grounding and bonding, or inert atmospheres.

Hands

The selection of specific gloves for a specific application and time of use in a working area, should also take into account other factors on the working space, such as (but not limited to): other chemicals that are possibly used, physical requirements (protection against cutting/drilling, skill, thermal protection), and the instructions/specification of the supplier of gloves. (EN388) Impervious gloves : All types

Eyes

Safety glasses with side-shields (EN166)

Respiratory

In case of insufficient ventilation, wear suitable respiratory equipment. Effective dust mask. (EN149) Recommended Filter type: type P1

Skin/Body

Wear suitable protective clothing. Overall. Safety shoes.

Environmental

Do not allow to enter into surface water or drains. Comply with applicable Community environmental protection legislation.

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Solidification Point
---
Partition Coefficient
Not applicable
Auto Ignition Temperature
> 400 °C (VDI 2263)
Evaporation Rate
---
Dynamic Viscosity
---
Metal Corrosion
---
Molecular Weight
---
Upper Explosive Limit
No data available
Flash Point
---
Freezing Point
---
Solubility In Fat
---
Kinematic Viscosity
---
Softening Point
---
Relative Evaporation Rate
---
Density
---
Crystallisation Point
---
Decomposition Temperature
200 °C (DTA 10°C/min, Aluminium Vessel)
Odor
slight,acrylic-like
Relative Density
+/- 1,1
Vapor Density
NA: Negligible
Explosive Limits
---
Vapor Pressure
NA: Negligible
Form
powder
Lower Explosive Limit
No data available
Bulk Density
+/- 475 g/l
Solubility In Water
---
Colour Intensity
---
Colour
white
Voc Content
---
Flammability
Not fulfilling criteria for hazard class "Flammable Solids".
Melting Point
No data available
Odor Threshold
No data available
Appearance
powder
State Under Standard Conditions
---
Properties Status
---
Cloud Point
---
Ph
5 - 7 (1% Aqueous solution at room temperature.)
Physical State Data
solid
Solubility
miscible with most organic solvents
Physical State
powder
Boiling Point
Decomposes below the boiling point.
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Stability

The product is stable under storage at normal ambient temperatures.

Reactivity

See also section 10.5

Hazardous reactions

Potential dust explosion hazard.

Avoid

Keep away from heat/sparks/open flames/hot surfaces. - No smoking. Keep away from heat. See also section 7

Incompatible

Oxidising agents Strong acids Strong bases See also section 7 Handling and storage

Decomposition

Burning produces noxious and toxic fumes. Possible decomposition products are: Carbon oxides

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

Treatment

Where possible recycling is preferred to disposal or incineration. Can be incinerated, when in compliance with local regulations.

Disposal

Where possible recycling is preferred to disposal or incineration. Can be incinerated, when in compliance with local regulations.

Waste Codes

07 02 13 Waste codes should be assigned by the user based on the application for which the product was used. EWC
14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

Chemical Safety Assessment Performed
?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for Kane Ace PA121, PA210, PA220, PA310, PA600, PA610, PA630, PA650?

The signal word is no signal word.

What is the physical form of Kane Ace PA121, PA210, PA220, PA310, PA600, PA610, PA630, PA650?

Kane Ace PA121, PA210, PA220, PA310, PA600, PA610, PA630, PA650 is a powder appearing as powder with white color. It has slight,acrylic-like odor.

What is the solubility of Kane Ace PA121, PA210, PA220, PA310, PA600, PA610, PA630, PA650?

miscible with most organic solvents

What is Kane Ace PA121, PA210, PA220, PA310, PA600, PA610, PA630, PA650 used for?

Industrial use; Manufacture of plastic materials

What is the melting point of Kane Ace PA121, PA210, PA220, PA310, PA600, PA610, PA630, PA650?

The melting point is No data available and the boiling point is Decomposes below the boiling point..