Kane Ace™ M582

Remove casualty to fresh air and keep warm and at rest. In case of doubt or persistent symptoms, consult always a physician.

Symptoms: Inhalation of dust may cause irritation of the respiratory system.

Remove contaminated clothing and shoes. Gently wash with plenty of soap and water. In case of doubt or persistent symptoms, consult always a physician.

Symptoms: Contact with dust may cause mechanical irritation or drying of the skin.

Rinse immediately carefully and thoroughly with eye-bath or water. Remove contact lenses, if present and easy to do. Continue rinsing. In case of doubt or persistent symptoms, consult always a physician.

Symptoms: Dust may cause painful eye irritation and tearing.

Get immediate medical advice/attention. Rinse mouth thoroughly with water. Induce vomiting if person is conscious. Never give anything by mouth to an unconscious person.

Symptoms: This product has no known adverse effect on human health. Non-hazardous substance.

carbon dioxide (CO2), powder, alcohol-resistant foam, water spray.

Strong water jet. Do not use a solid water stream as it may scatter and spread fire.

Not flammable. Risk of dust explosion. May form explosive dust-air mixture.

Evacuate area. Use water spray or fog for cooling exposed containers. Contain the extinguishing fluids by bunding. Prevent fire fighting water from entering the environment. Avoid dust formation. Knock down/dilute dust cloud with water spray.

Evacuate unnecessary personnel. Keep upwind. Provide adequate ventilation. Do not breathe dust. Avoid contact with skin, eyes and clothing. Ensure procedures and training for emergency decontamination and disposal are in place.

Large spills: scoop solid spill into closing containers.

Do not allow to enter into surface water or drains.

Take up mechanically (sweeping, shovelling) and collect in suitable container for disposal.

Materials: suitable container

Provide adequate ventilation. Use personal protective equipment as required. Concerning personal protective equipment to use, see section 8. Do not breathe dust. Avoid contact with skin, eyes and clothing. Take any precaution to avoid mixing with Incompatible materials, Refer to Section 10 on Incompatible Materials. Ensure proper process control to avoid excess waste discharge (temperature, concentration, pH, time). Avoid release to the environment. Avoid dust formation. Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. Ground/bond container and receiving equipment. Use explosion-proof equipment. Use only non-sparking tools.

Store in a dry, cool and well-ventilated place.

Keep good industrial hygiene. Wash hands and other exposed areas with mild soap and water before eating, drinking or smoking and when leaving work. Do not eat, drink or smoke when using this product. Keep away from food, drink and animal feedingstuffs. Remove contaminated clothes. Separate working clothes from town clothes. Launder separately. Wash contaminated clothing before reuse.

Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. Ground/bond container and receiving equipment.

Use only in area provided with appropriate exhaust ventilation. Apply measures to prevent dust explosions. Ensure equipment is adequately earthed. Organisational measures to prevent/limit releases, dispersion and exposure. See Section 7 for information on safe handling.

The selection of specific gloves for a specific application and time of use in a working area, should also take into account other factors on the working space, such as (but not limited to): other chemicals that are possibly used, physical requirements (protection against cutting/drilling, skill, thermal protection), and the instructions/specification of the supplier of gloves. (EN388). Impervious gloves : . All types

Use suitable eye protection (EN166): Safety glasses with side shields

Not required for normal conditions of use. In case of insufficient ventilation, wear suitable respiratory equipment. Effective dust mask (EN149). Filter type: type P1

Wear suitable protective clothing. Overall. Chemical resistant safety shoes .

Avoid release to the environment. Comply with applicable Community environmental protection legislation.

Stable at ambient temperature and under normal conditions of use.

None under normal conditions. Reference to other sections: 10.4 & 10.5.

Potential dust explosion hazard. Hydrolyses in presence of: Strong acids, Heat.

Avoid dust formation. Avoid the build-up of electrostatic charge. Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. Protect from sunlight. Protect from moisture.

Oxidising agents. Acids.

Burning produces noxious and toxic fumes. Possible decomposition products are: Carbon oxides. Sulphur oxides. Reference to other sections 5.2.

Recycling is preferred to disposal or incineration. If recycling is not possible, eliminate in accordance with local valid waste disposal regulations.

Avoid release to the environment. Dispose of empty containers and wastes safely. See Section 7 for information on safe handling. Refer to manufacturer/supplier for information on recovery/recycling.