Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Kane Ace™ B28A, B29A, B660
- Product Form
- Substance
- Product Code
- SDS ref. 110-G1-KAC-20
- Chemical Name
- MBS Polymer
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Manufacture of plastic materials
Uses advised against
No additional information available
Manufacturers & Suppliers
Kaneka Belgium NV
manufacturer
Nijverheidsstraat 16, 2260 Westerlo-Level - Belgium
Emergency Contacts
Kaneka Belgium NV
+32-14-25 78 00
24 hours per day, 7 days per week
Kaneka Belgium NV
+32-14-25 78 10
24 hours per day, 7 days per week
National Poisons Information Centre
+353 1 809 2566
Healthcare professionals-24/7
National Poisons Information Centre
+353 1 809 2166
public, 8am - 10pm, 7/7
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Methylmethacrylate-butadiene-styrene polymer | --- | 99% | No |
| 2,4-dimethyl-6-(1-methyl-pentadecyl)phenol EC: 411-220-5 | 134701-20-5 | 0.25 - 2.5% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
Remove casualty to fresh air and keep warm and at rest. In case of doubt or persistent symptoms, consult always a physician.
Symptoms: May cause nose, throat, and lung irritation. (dust).
Remove contaminated clothing and shoes. Gently wash with plenty of soap and water. In case of doubt or persistent symptoms, consult always a physician.
Symptoms: Contact with dust may cause mechanical irritation or drying of the skin. May produce an allergic reaction.
In case of doubt or persistent symptoms, consult always a physician. Rinse immediately carefully and thoroughly with eye-bath or water.
Symptoms: Dust may cause painful eye irritation and tearing.
Rinse mouth thoroughly with water. Induce vomiting if person is conscious. Never give anything by mouth to an unconscious person. Get medical advice/attention.
Symptoms: This product has no known adverse effect on human health. Non-hazardous substance.
Immediate Medical Attention
Get medical advice/attention.
Medical Treatment
Treat symptomatically.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
carbon dioxide (CO2), powder, alcohol-resistant foam, water spray.
Strong water jet. Do not use a solid water stream as it may scatter and spread fire.
Not flammable. May form explosive dust-air mixture. Do not allow run-off from fire-fighting to enter drains or water courses.
Evacuate area. Use water spray or fog for cooling exposed containers. Contain the extinguishing fluids by bunding. Prevent fire fighting water from entering the environment.
Firefighter Protection
Do not attempt to take action without suitable protective equipment. Self-contained breathing apparatus.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Evacuate unnecessary personnel. Keep upwind. Provide adequate ventilation. Do not breathe dust. Avoid contact with skin, eyes and clothing. Wear recommended personal protective equipment. Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. Avoid dust formation.
Do not allow to enter into surface water or drains.
Take up mechanically (sweeping, shovelling) and collect in suitable container for disposal
Related Products
Similar products with comparable safety profiles
Kane Ace™ M582
---
Kane Ace™ M410
---
Kane Ace™ FM80
---
Kane Ace PA121, PA210, PA220, PA310, PA600, PA610, PA630, PA650
---
Kane Ace PA121, PA210, PA211, PA220, PA310, PA131, PA600, PA610, PA630, PA650
---
Kane Ace™ MP110, MP115
---
Kane Ace™ FM22, FM50, FM56, FM57, UF100, UF600
---
Caromax 28LN
---
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Provide adequate ventilation. Do not breathe dust. Avoid contact with skin, eyes and clothing. Use personal protective equipment as required. Take any precaution to avoid mixing with Incompatible materials. Ensure proper process control to avoid excess waste discharge (temperature, concentration, pH, time). Avoid release to the environment. Avoid dust formation. Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. Take precautionary measures against static discharges.
Store in a dry, cool and well-ventilated place. Do not store near or with any of the incompatible materials listed in section 10. Take precautionary measures against static discharge. Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. Protect from sunlight.
Keep good industrial hygiene. Wash hands and other exposed areas with mild soap and water before eating, drinking or smoking and when leaving work. Do not eat, drink or smoke when using this product. Keep away from food, drink and animal feedingstuffs. Remove contaminated clothes. Separate working clothes from town clothes. Launder separately. Wash contaminated clothing before reuse.
Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. Take precautionary measures against static discharges.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Provide adequate ventilation. Use only in area provided with appropriate exhaust ventilation. Apply measures to prevent dust explosions. Provide adequate precautions, such as electrical grounding and bonding, or inert atmospheres. Organisational measures to prevent/limit releases, dispersion and exposure. See Section 7 for information on safe handling.
The selection of specific gloves for a specific application and time of use in a working area, should also take into account other factors on the working space, such as (but not limited to): other chemicals that are possibly used, physical requirements (protection against cutting/drilling, skill, thermal protection), and the instructions/specification of the supplier of gloves. (EN388). Impervious gloves : All types
Use suitable eye protection (EN166): Safety glasses with side-shields
Not required for normal conditions of use. In case of insufficient ventilation, wear suitable respiratory equipment. Effective dust mask (EN149). Filter type: type P1
Wear suitable protective clothing. Overall. Chemical resistant safety shoes.
Avoid release to the environment. Comply with applicable Community environmental protection legislation.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable at ambient temperature and under normal conditions of use.
None under normal conditions. Reference to other sections: 10.4 & 10.5.
Potential dust explosion hazard. No dangerous reactions known under normal conditions of use.
Avoid the build-up of electrostatic charge. Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. Protect from sunlight. See Section 7 for information on safe handling.
Oxidising agents. See Section 7 for information on safe handling.
Burning produces noxious and toxic fumes. Possible decomposition products are: Carbon oxides. Reference to other sections 5.2.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Recycling is preferred to disposal or incineration. If recycling is not possible, eliminate in accordance with local valid waste disposal regulations.
Avoid release to the environment. Dispose of empty containers and wastes safely. Refer to manufacturer/supplier for information on recovery/recycling.
Waste Codes
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- Not applicable
- Shipping Name
- Not applicable
- Transport Class
- Not applicable
- Packing Group
- Not applicable
Regulatory Information
Chemical regulations, safety assessments, and compliance status
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Kane Ace™ B28A, B29A, B660?
The signal word is no signal word.
What is the physical form of Kane Ace™ B28A, B29A, B660?
Kane Ace™ B28A, B29A, B660 is a solid appearing as powder. with white. color. It has slight. acrylic-like. odor.
What is the solubility of Kane Ace™ B28A, B29A, B660?
miscible with most organic solvents.
What is Kane Ace™ B28A, B29A, B660 used for?
Manufacture of plastic materials
What are the hazard statements for Kane Ace™ B28A, B29A, B660?
This substance has 1 hazard statement:
- H412: Harmful to aquatic life with long lasting effects.
What is the melting point of Kane Ace™ B28A, B29A, B660?
The melting point is No data available and the boiling point is Decomposes below the boiling point..