Kane Ace™ MP110, MP115

Remove person to fresh air. If signs/symptoms continue, get medical attention.

Symptoms: May cause nose, throat, and lung irritation. (dust).

After contact with skin, wash immediately with plenty of water and soap. In case of doubt or persistent symptoms, consult always a physician.

Symptoms: Contact with dust may cause mechanical irritation or drying of the skin.

Rinse immediately with plenty of water, also under the eyelids, for at least 15 minutes. In case of doubt or persistent symptoms, consult always a physician.

Symptoms: Dust may cause painful eye irritation and tearing.

Get immediate medical advice/attention. Rinse mouth. Induce vomiting if person is conscious. Never give anything by mouth to an unconscious person.

Symptoms: This product has no known adverse effect on human health. Non-hazardous substance .

Water spray, Alcohol resistant foam, Carbon dioxide, Dry extinguishing powder.

Strong water jet. Do not use a solid water stream as it may scatter and spread fire.

Non flammable. May form explosive dust-air mixture. Do not allow run-off from fire-fighting to enter drains or water courses.

Evacuate area. Use water spray or fog for cooling exposed containers.

Evacuate unnecessary personnel. Keep upwind. Provide adequate ventilation. Stop leak if safe to do so.

Do not allow to enter into surface water or drains.

Take up mechanically (sweeping, shovelling).

Provide adequate ventilation. Use personal protective equipment as required. Concerning personal protective equipment to use, see section 8. Do not breathe dust. Avoid contact with skin, eyes and clothing. Avoid dust formation. Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. Take precautionary measures against static discharges. Take any precaution to avoid mixing with Incompatible materials, Refer to Section 10 on Incompatible Materials. Do not allow to enter into surface water or drains.

Keep containers tightly closed in a dry, cool and well-ventilated place. Protect from sunlight. Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.

Keep good industrial hygiene. Wash hands and face before breaks and immediately after handling of the product. When using do not eat, drink or smoke. Remove contaminated clothing and shoes.

Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. Take precautionary measures against static discharges.

Use only in area provided with appropriate exhaust ventilation. Apply measures to prevent dust explosions. Provide adequate precautions, such as electrical grounding and bonding, or inert atmospheres. Organisational measures to prevent/limit releases, dispersion and exposure. See Section 7 for information on safe handling.

The selection of specific gloves for a specific application and time of use in a working area, should also take into account other factors on the working space, such as (but not limited to): other chemicals that are possibly used, physical requirements (protection against cutting/drilling, skill, thermal protection), and the instructions/specification of the supplier of gloves. (EN388). Impervious gloves : All types

Safety glasses with side-shields (EN166)

In case of insufficient ventilation, wear suitable respiratory equipment. Effective dust mask (EN149). Filter type: type P1

Wear suitable protective clothing. Overall. Chemical resistant safety shoes.

Avoid release to the environment. Comply with applicable Community environmental protection legislation.

Stable at ambient temperature and under normal conditions of use.

None under normal conditions. Reference to other sections 10.5.

Potential dust explosion hazard.

Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. Protect from sunlight. See Section 7 for information on safe handling.

Oxidising agents. See Section 7 for information on safe handling.

Burning produces noxious and toxic fumes. Possible decomposition products are: Carbon oxides.

Refer to manufacturer/supplier for information on recovery/recycling. Can be incinerated, when in compliance with local regulations.

Refer to manufacturer/supplier for information on recovery/recycling. Can be incinerated, when in compliance with local regulations.