Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Azepox 65
- Product Form
- Substance
- Product Code
- 312689
- Chemical Name
- Soybean oil, epoxidized
Regulatory Identifiers
- CAS Number
- 8013-07-8 Check regulations →
- EC Number
- 232-391-0 Check regulations →
- REACH No.
- 01-2119471314-43-XXXX
Identified Uses
Chemical intermediate, cosmetic additive, Lubricant, Preservative, Polymer Additives
Uses advised against
No additional information available
Manufacturers & Suppliers
AZELIS
global supplier
Posthofbrug 12, box 6, B-2600 Antwerp, Belgium
http://www.azelis.com
Emergency Contacts
CareChem 24x7
+44 1235 239670
24x7
CareChem 24x7
+1 202 464 2554
24x7
CareChem 24x7
+1 800 579 7421
24x7
CareChem 24x7
+65 3158 1074
24x7
CareChem 24x7
+44 1235 239671
24x7
CareChem 24x7
+44 1865 407333
24x7
EN
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
Soybean oil, epoxidized (CAS-No.) 8013-07-8 (EC-No.) 232-391-0 (REACH-no) 01-2119471314-43-XXXX: 100 %
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Soybean oil, epoxidized EC: 232-391-0 | 8013-07-8 | 100% | No |
First Aid Measures
Emergency procedures for chemical exposure incidents
Remove person to fresh air and keep comfortable for breathing. If breathing difficulties persist : Get medical advice/attention.
Take off contaminated clothing. Gently wash with plenty of soap and water. If skin irritation occurs: Get medical advice/attention.
Rinse immediately and thoroughly, pulling the eyelids well away from the eye (15 minutes minimum). Remove contact lenses, if present and easy to do. Continue rinsing. If eye irritation persists: Get medical advice/attention.
Do not induce vomiting. Rinse mouth out with water. Never give anything by mouth to an unconscious person. Call a poison center or a doctor if you feel unwell.
Immediate Medical Attention
Get immediate medical advice/attention.
Medical Treatment
Treat symptomatically.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Dry chemical. Carbon dioxide. Sand/earth. Water spray. Foam.
Do not use a solid water stream as it may scatter and spread fire.
Cool down the containers exposed to heat with a water spray.
Firefighter Protection
Do not attempt to take action without suitable protective equipment. Self-contained breathing apparatus. Complete protective clothing.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Ventilate spillage area. Spilled material may present a slipping hazard.
Avoid release to the environment.
Stop leak if safe to do so. Take up liquid spill into inert absorbent material. Clear up rapidly by scoop or vacuum. Keep in suitable, closed containers for disposal. Put into a labelled container and provide safe disposal. Clear contaminated areas thoroughly.
Materials: inert absorbent material
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Ensure good ventilation of the work station. Wear personal protective equipment. Do not breathe dust/fume/gas/mist/vapours/spray.
Store in a well-ventilated place. Keep cool. Keep container tightly closed and dry. At temperatures < 15 °C precipitations may occur which can be redissolved by heating to 50 °C.
Contaminated work clothing should not be allowed out of the workplace. Do not eat, drink or smoke when using this product. Always wash hands after handling the product.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Emergency eye wash fountains and safety showers should be available in the immediate vicinity of any potential exposure. Ensure good ventilation of the work station.
Protective gloves
Safety glasses with side shields
In case of insufficient ventilation, wear suitable respiratory equipment
Wear suitable protective clothing. Long sleeved protective clothing
Avoid release to the environment. Do not allow into drains or water courses.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under normal conditions.
The product is non-reactive under normal conditions of use, storage and transport.
Hazardous polymerisation will not occur.
Air contact. Moisture. Overheating.
Strong oxidizing agents.
Carbon oxides (CO, CO2).
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
12.1. Toxicity
12.2. Persistence and degradability
12.3. Bioaccumulative potential
No bioaccumulation.
12.4. Mobility in soil
12.5. Results of PBT and vPvB assessment
The substance does not meet the PBT or vPvB criteria of REACH regulation, annex XIII.
12.6. Other adverse effects
No additional information available
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Incinerate at a licensed installation. Dispose of contents/container in accordance with licensed collector's sorting instructions.
Dispose in a safe manner in accordance with local/national regulations.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- Not regulated
- Shipping Name
- Not regulated
- Transport Class
- Not regulated
- Packing Group
- Not regulated
Regulatory Information
Chemical regulations, safety assessments, and compliance status
No additional information available
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Azepox 65?
The signal word is no signal word.
What is the physical form of Azepox 65?
Azepox 65 is a liquid appearing as clear. viscous. with colourless. color. It has slight. odor.
What is the solubility of Azepox 65?
Water: immiscible
What is Azepox 65 used for?
Chemical intermediate, cosmetic additive, Lubricant, Preservative, Polymer Additives
What is the melting point of Azepox 65?
The melting point is Not applicable and the boiling point is > 250 °C.