Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- ZEP 45 AERO
- Product Code
- 01470001
Regulatory Identifiers
- CAS Number
- N/A
- UFI Code
- 7J6T-1KST-RT8J-F7MX
Identified Uses
Lubricant, Penetrating oil
Manufacturers & Suppliers
ZEP ITALIA SRL
manufacturer
Piazzale Luigi Cadorna, 2 20123 Milano (MI) - Italy; Via Nettunense Km. 25.000 04011 Aprilia (LT) - Italy
+39.06.926691
http://www.zep.it
ZEP Industries BV
manufacturer
Vierlinghweg 30 4612 PN Bergen op Zoom The Netherlands
+31 164 250 100
ZEP UK Ltd
distributor
Tanhouse Lane Widnes Cheshire, WA8 0RD United Kingdom
+44 (0)151 422 1000
http://www.zep.co.uk
Emergency Contacts
NHS
+44 0845 46 47
NHS
+44 08454 24 24 24
emergency number (europe)
112
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS02
GHS07
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Hydrocarbons, C9-C11, n-alkanes, isoalkanes, cyclics, <2% aromatics EC: 919-857-5 | 64742-48-9 | 25 - 50% | Yes |
| ethanol EC: 200-578-6 | 64-17-5 | 2.5 - 10% | Yes |
| Distillates (petroleum), hydrotreated light paraffinic (Note L) EC: 265-158-7 | 64742-55-8 | 2.5 - 10% | Yes |
| Distillates (petroleum), hydrotreated light naphthenic (Note L) EC: 265-156-6 | 64742-53-6 | 2.5 - 10% | Yes |
| Sulfonic acids, petroleum, sodium salts EC: 271-781-5 | 68608-26-4 | 2.5 - 10% | Yes |
| Isoamyl acetate EC: 204-662-3 | 123-92-2 | 2.5 - 10% | Yes |
| 2-butoxyethanol EC: 203-905-0 | 111-76-2 | 2.5 - 10% | Yes |
| Calcium bis(dinonylnaphthalenesulphonate) EC: 260-991-2 | 57855-77-3 | 1 - 2.5% | Yes |
| carbon dioxide EC: 204-696-9 | 124-38-9 | 1 - 2.5% | Yes |
| (Z)-N-methyl-N-(1-oxo-9-octadecenyl)glycine EC: 203-749-3 | 110-25-8 | 0.25 - 1% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
Seek medical treatment in case of complaints.
Immediately rinse with water.
Rinse opened eye for several minutes under running water. If symptoms persist, consult a doctor.
Do not induce vomiting; call for medical help immediately. Seek immediate medical advice.
Immediate Medical Attention
Call for medical help immediately. Seek immediate medical advice.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
CO2, powder or water spray. Fight larger fires with water spray or alcohol resistant foam.
Formation of toxic gases is possible during heating or in case of fire.
Cool endangered receptacles with water spray.
Firefighter Protection
Wear fully protective suit. Wear self-contained respiratory protective device. Do not inhale explosion gases or combustion gases.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Remove persons from danger area. Wear protective equipment. Keep unprotected persons away.
Inform respective authorities in case of seepage into water course or sewage system. Do not allow to enter sewers/ surface or ground water. Keep contaminated washing water and dispose of appropriately.
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Store in cool, dry place in tightly closed receptacles. Ensure good ventilation/exhaustion at the workplace.
Store in cool, dry place in tightly closed receptacles. Observe official regulations on storing packagings with pressurised containers. Keep receptacle tightly sealed. Protect from heat and direct sunlight.
Do not spray onto a naked flame or any incandescent material. Keep ignition sources away - Do not smoke. Protect from heat.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
No further data; see section 7.
Protective gloves. Material of gloves: The selection of the suitable gloves does not only depend on the material, but also on further marks of quality and varies from manufacturer to manufacturer. As the product is a preparation of several substances, the resistance of the glove material cannot be calculated in advance and has therefore to be checked prior to the application. Penetration time of glove material: The exact break through time has to be found out by the manufacturer of the protective gloves and has to be observed. The determined penetration times according to EN 16523-1:2015 are not performed under practical conditions. Therefore a maximum wearing time, which corresponds to 50% of the penetration time, is recommended. Not suitable are gloves made of the following materials: Strong material gloves
Tightly sealed goggles
Filter A
Protective work clothing
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
No decomposition if used according to specifications.
No further relevant information available.
No dangerous reactions known.
No further relevant information available.
No further relevant information available.
No dangerous decomposition products known.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 1950
- Shipping Name
- AEROSOLS
- Transport Class
- 2.1
- Packing Group
- Void
Warning: Gases.
Warning: Gases.
Warning: Gases.
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for ZEP 45 AERO?
The signal word is danger.
What is the physical form of ZEP 45 AERO?
ZEP 45 AERO is a aerosol with according to product specification color. It has characteristic odor.
What is ZEP 45 AERO used for?
Lubricant, Penetrating oil
What are the hazard statements for ZEP 45 AERO?
This substance has 3 hazard statements:
- H222: Extremely flammable aerosol. Pressurised container: May burst if heated.
- H319: Causes serious eye irritation.
- H336: May cause drowsiness or dizziness.
What is the melting point of ZEP 45 AERO?
The melting point is Undetermined. and the boiling point is Not applicable, as aerosol..