Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Contact VM 120
- Product Code
- 123500
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
1-Component Cyanacrylat - Adhesives
Manufacturers & Suppliers
WEICON GmbH & Co. KG
distributor
Königsberger Str. 255, DE-48157 Münster
++49(0)251 / 9322 - 0
http://www.weicon.de
WEICON GmbH & Co. KG
manufacturer
Königsberger Str. 255, DE-48157 Münster
Emergency Contacts
EMERGENCY CONTACT - UK, UAE, South Africa
++44 1865 407333
24h
EN
TRANSPORT EMERGENCY CONTACT - UK, UAE, South Africa
++44 1865 407333
24h
EN
GIFTNOTRUF/TRANSPORTNOTRUF - Deutschland
++49 69 222 25285
24h
DE, EN
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS07
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
One-component adhesive based on cyanoacrylate acid alkyl ester.
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| ethyl 2-cyanoacrylate EC: 230-391-5 | 7085-85-0 | 80 - 99.9% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
Remove the casualty into fresh air and keep him immobile. In the event of symptoms refer for medical treatment.
In case of contact with skin wash off immediately with soap and water. Do not take off solidified product from skin. Refer for medical treatment.
Symptoms: skin irritation
After eye contact, rinse opened eye for 15 minutes under running water. Transfer to hospital for specialist examination.
Call for a doctor immediately.
Immediate Medical Attention
Refer for medical treatment; Transfer to hospital for specialist examination; Call for a doctor immediately.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Alcohol-resistant foam, Dry powder, Carbon dioxide
Full water jet
In case of fire formation of dangerous gases possible.
Do not inhale explosion and/or combustion gases.
Firefighter Protection
Fire-fighting operations, rescue and clearing work under effect of combustion and smoulder gases just may be done with breathing apparatus.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Ensure adequate ventilation. Use personal protective clothing. Use breathing apparatus if exposed to vapours/dust/aerosol.
Do not discharge into the drains or bodies of water.
Take up with absorbent material
Materials: sand, kieselguhr, acid binder, general-purpose binder, sawdust
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Avoid contact with eyes and skin. Do not inhale gases/vapours/aerosols. Open and handle container with care!
Keep in closed original container. Keep container tightly closed and store at cool and aired place. Protect from heat and direct solar radiation.
At work do not eat, drink and smoke. Wash soiled clothing immediately. Wash hands before breaks and after work.
Pay attention to general rules of internal fire prevention.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Sufficient ventilation and exhaustion.
Nitrile rubber; 0,4mm; 480min;60min. In the cases of special applications, it is recommended to check the chemical resistance with the manufacturer of the gloves.
tightly fitting goggles
In case of insufficient ventilation or long-term effect use breathing apparatus.
protective clothing
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
No information available.
No information available.
Reactions with oxidising agents. Explosive reaction with water. Reactions with alcohols, amines, aqueous acids and alkalies.
After contact with water: Keep away from heat. Risk of polymerisation.
Alkali (lye), Alcohols, Amines, Oxidising agent, strong, Water
Gases/vapours, toxic, Carbon monoxide and carbon dioxide., Nitrous oxides (NOx)
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Assignment to a waste code number / waste identification according to the EWC is to be carried out on a sector or process-specific basis.
Remove in accordance with local official regulations.
Waste Codes
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Contact VM 120?
The signal word is warning.
What is the physical form of Contact VM 120?
Contact VM 120 is a liquid appearing as liquid with colourless color. It has acrid odor.
What is the solubility of Contact VM 120?
acetone: teilweise mischbar
What is Contact VM 120 used for?
1-Component Cyanacrylat - Adhesives
What are the hazard statements for Contact VM 120?
This substance has 3 hazard statements:
- H315: Causes skin irritation.
- H319: Causes serious eye irritation.
- H335: May cause respiratory irritation.
What is the melting point of Contact VM 120?
The melting point is not determined and the boiling point is > 150 °C.