GlasWeld Scratch Polishing Compound

Provide fresh air. If breathing is irregular or stopped, immediately seek medical assistance and start first aid actions. In case of respiratory tract irritation, consult a physician.

Brush off loose particles from skin. Rinse skin with water/shower. Wash with plenty of soap and water.

Remove contact lenses, if present and easy to do. Continue rinsing. Irrigate copiously with clean, fresh water for at least 15 minutes, holding the eyelids apart.

Rinse mouth with water (only if the person is conscious).

Co-ordinate firefighting measures to the fire surroundings

Water jet.

In case of fire and/or explosion do not breathe fumes. Co-ordinate firefighting measures to the fire surroundings. Fight fire with normal precautions from a reasonable distance.

For non-emergency personnel: Remove persons to safety. Ventilate affected area. Control of dust. For emergency responders: Wear breathing apparatus if exposed to vapours/dust/spray/gases. Use personal protective equipment as required.

Keep away from drains, surface and ground water. Retain contaminated washing water and dispose of it.

Wipe up with absorbent material (e.g. cloth, fleece).

Materials: Absorbent material (e.g. cloth, fleece).

Use local and general ventilation. Take precautionary measures against static discharge. Use only in well-ventilated areas.

Store in a well-ventilated place. Keep container tightly closed. Protect against external exposure, such as High temperatures. UV-radiation/sunlight.

Wash hands after use. Do not eat, drink and smoke in work areas. Remove contaminated clothing and protective equipment before entering eating areas. Never keep food or drink in the vicinity of chemicals. Never place chemicals in containers that are normally used for food or drink. Keep away from food, drink and animal feedingstuffs.

Keep away from sources of ignition - No smoking. Take precautionary measures against static discharge.

General ventilation.

Wear suitable gloves. Check leak-tightness/impermeability prior to use. For special purposes, it is recommended to check the resistance to chemicals of the protective gloves mentioned above together with the supplier of these gloves. Chemical protection gloves are suitable, which are tested according to EN 374. The selection of the suitable gloves does not only depend on the material, but also on further marks of quality and varies from manufacturer to manufacturer. As the product is a preparation of several substances, the resistance of the glove material can not be calculated in advance and has therefore to be checked prior to the application. Type of material: NBR: acrylonitrile-butadiene rubber, Nitrile rubber. Material thickness: Use gloves with a minimum material thickness: ≥ 0,38 mm. Breakthrough times of the glove material: Use gloves with a minimum breakthrough times of the glove material: >480 minutes (permeation: level 6).

Use safety goggle with side protection (EN 166).

In case of inadequate ventilation wear respiratory protection. Full face mask/half mask/quarter mask (EN 136/140).

Protective clothing (EN 340 & EN ISO 13688).

Take appropriate precautions to avoid uncontrolled release into the environment. Keep away from drains, surface and ground water.

The material is stable under normal ambient and anticipated storage and handling conditions of temperature and pressure.

This material is not reactive under normal ambient conditions.

No known hazardous reactions.

There are no specific conditions known which have to be avoided.

Oxidisers.

Reasonably anticipated hazardous decomposition products produced as a result of use, storage, spill and heating are not known. Hazardous combustion products: see section 5.