Kühlflüssigkeit ME-KM 21

Remove person to fresh air and keep comfortable for breathing. If unconscious place in recovery position and seek medical advice. If breathing is irregular or stopped, administer artificial respiration.

After contact with skin, wash immediately with plenty of water and soap. Remove contaminated, saturated clothing immediately.

After contact with the eyes, rinse with water with the eyelids open for a sufficient length of time, then consult an ophthalmologist immediately. Remove contact lenses, if present and easy to do. Continue rinsing.

If accidentally swallowed rinse the mouth with plenty of water (only if the person is conscious) and obtain immediate medical attention. Let water be drunken in little sips (dilution effect). Do NOT induce vomiting.

Dry extinguishing powder, alcohol resistant foam, Carbon dioxide (CO2), Water spray jet

Full water jet

Carbon monoxide Carbon dioxide (CO2) Nitrogen oxides (NOx)

Provide fresh air.

Do not allow to enter into surface water or drains. Do not allow to enter into soil/subsoil. Shafts and sewers must be protected from entry of the product.

Absorb with liquid-binding material

Materials: sand, diatomaceous earth, acid- or universal binding agents

See

Provide adequate ventilation as well as local exhaustion at critical locations. Ground and bond container and receiving equipment. Carry out filling operations only at stations with exhaust ventilation facilities. Make available sufficient washing facilities Provide eye shower and label its location conspicuously

Tested protective gloves must be worn: EN ISO 374 NBR (Nitrile rubber) NR (natural rubber, natural latex) Butyl caoutchouc (butyl rubber) Thickness of the glove material >= 0,4 mm Breakthrough times and swelling properties of the material must be taken into consideration. For special purposes, it is recommended to check the resistance to chemicals of the protective gloves mentioned above together with the supplier of these gloves. Wearing time with occasional contact (splashes): max. 480 min. (NBR (Nitrile rubber)) Wearing time with permanent contact 240 - 480 min (NBR (Nitrile rubber)) Observe the wear time limits as specified by the manufacturer. Wear cotton undermitten if possible.

Eye glasses with side protection, goggles

If technical exhaust or ventilation measures are not possible or insufficient, respiratory protection must be worn. Suitable respiratory protection apparatus: Full-/half-/quarter-face masks (DIN EN 136/140) ABEK-P3

Protective clothing. (liquid-tight) Wear anti-static footwear and clothing Street clothing should be stored separately from work clothing. Take off immediately all contaminated clothing and wash it before reuse.

No information available.

The product is stable under storage at normal ambient temperatures.

No information available.

Reacts with: Oxidising agent, strong, sulphuric acid

Keep away from sources of heat (e.g. hot surfaces), sparks and open flames.

Oxidising agent, strong; Strong acid; Strong alkali

Carbon dioxide, Carbon monoxide