Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- X114747
- Product Code
- 000000000004070698
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Additive
Uses advised against
Restricted to professional users.
Manufacturers & Suppliers
LANXESS Solutions UK Ltd.
manufacturer
Tenax Road, Trafford Park, Manchester, United Kingdom, M17 1WT
+44 161 875 3800
Emergency Contacts
NCEC
+44 (0) 1235 239 670
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Benzenesulfonic acid, C10-16-alkyl derivs., calcium salts EC: 271-529-4 | 68584-23-6 | 10 - 20% | Yes |
| Sulfonic acids, petroleum, calcium salts EC: 263-093-9 | 61789-86-4 | 1 - 10% | Yes |
| Benzenesulfonic acid, mono-C16-24-alkyl derivs., calcium salts EC: 274-263-7 | 70024-69-0 | 1 - 10% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
Remove to fresh air. If breathing is difficult, give oxygen. If symptoms persist, call a physician.
Symptoms: Aspiration may cause pulmonary oedema and pneumonitis.
Cool skin rapidly with cold water after contact with molten material. Wash off with warm water and soap. If skin irritation persists, call a physician.
Rinse immediately with plenty of water, also under the eyelids, for at least 15 minutes. Obtain medical attention.
Obtain medical attention. Never give anything by mouth to an unconscious person.
Immediate Medical Attention
Obtain medical attention for eye contact and ingestion. If symptoms persist, call a physician for inhalation and skin contact.
Medical Treatment
For specialist advice physicians should contact the Poisons Information Service.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Carbon dioxide (CO2), Dry chemical, Dry sand, Foam, Water mist
High volume water jet
Do not use a solid water stream as it may scatter and spread fire.
Cool containers/tanks with water spray.
Firefighter Protection
Wear a positive-pressure supplied-air respirator with full face-piece. Use personal protective equipment.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Soak up with inert absorbent material (e.g. sand, silica gel, acid binder, universal binder, sawdust). Pick up and transfer to properly labelled containers.
Dam up. Large spills should be collected mechanically (remove by pumping) for disposal.
Should not be released into the environment. Do not flush into surface water or sanitary sewer system.
Clean-up methods - large spillage: Dam up. Large spills should be collected mechanically (remove by pumping) for disposal. Clean-up methods - small spillage: Soak up with inert absorbent material (e.g. sand, silica gel, acid binder, universal binder, sawdust). Pick up and transfer to properly labelled containers.
Materials: inert absorbent material (e.g. sand, silica gel, acid binder, universal binder, sawdust)
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Handle in accordance with good industrial hygiene and safety practice. Avoid contact with skin, eyes and clothing. Wear suitable protective equipment. Keep tightly closed. Protect from contamination. Ensure all equipment is electrically grounded before beginning transfer operations.
Keep containers tightly closed in a dry, cool and well-ventilated place.
Take precautionary measures against static discharges.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Highly effective exhaust ventilation. Ensure that eyewash stations and safety showers are close to the workstation location.
Impervious gloves
Tightly fitting safety goggles
In the case of vapour formation use a respirator with an approved filter. Respirator with combination filter for vapour/particulate (EN 141)
Impervious clothing
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
No decomposition if stored and applied as directed.
No dangerous reaction known under conditions of normal use.
Hazardous polymerisation does not occur.
Exposure to moisture Contamination
Oxidizing agents Acids and bases
Carbon oxides Sulphur oxides Metal oxides
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Dispose of as hazardous waste in compliance with local and national regulations. Dispose of wastes in an approved waste disposal facility.
Dispose of as hazardous waste in compliance with local and national regulations. Dispose of wastes in an approved waste disposal facility.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for X114747?
The signal word is no signal word.
What is the physical form of X114747?
X114747 is a viscous liquid appearing as viscous liquid with brown color. It has mild, hydrocarbon-like odor.
What is the solubility of X114747?
Water solubility : negligible Solubility in other solvents : partly soluble
What is X114747 used for?
Additive
What is the melting point of X114747?
The melting point is No data available and the boiling point is > 275 °C.