Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- UFAPOL SLS 30
- Product Code
- F5305
Regulatory Identifiers
- CAS Number
- N/A
- UFI Code
- 1GPF-C06X-D00X-1EHM
Identified Uses
Surfactant for emulsification and polymerisation. Restricted to professional users.
Uses advised against
None known.
Manufacturers & Suppliers
Unger Fabrikker AS
manufacturer
Postboks 254, 1601 Fredrikstad
Emergency Contacts
The National Poisons Information Service
111
24 h service
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS05
GHS07
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Sulfuric acid, mono-C12-14-alkyl esters, sodium salts EC: 287-809-4 | 85586-07-8 | 20 - 30% | Yes |
| 1,2-Benzisothiazolin-3-one EC: 220-120-9 | 2634-33-5 | 0.05% | Yes |
See full text of H-phrases in section 16. Occupational exposure limits are listed in section 8, if these are available.
First Aid Measures
Emergency procedures for chemical exposure incidents
Upon breathing difficulties or irritation of the respiratory tract: Bring the person into fresh air and stay with him/her.
IF ON SKIN: Wash with plenty of water/water and soap. Remove contaminated clothing and shoes. Ensure to wash exposed skin thoroughly with water and soap. DO NOT use solvents or thinners. If skin irritation occurs: Get medical advice/attention.
Symptoms: The chemical irritates the skin and may cause itching, burning and redness. Allergic skin reactions: symptoms may include redness, swelling, blistering and itching.
If in eyes: Flush eyes with plenty of water or salt water (20-30 °C) for at least 30 minutes and continue until irritation stops. Remove contact lenses. Make sure you flush under the upper and lower eyelids. Seek medical assistance immediately and continue flushing during transport.
Symptoms: The chemical is corrosive to the eyes and may cause permanent harm. Symptoms may include intense burning, watery eyes, redness and blurred vision.
IF SWALLOWED: Call a POISON CENTER/doctor if you feel unwell. Rinse mouth.
Symptoms: May have a irritating effect on the digestive tract if swallowed. May cause stomach pain.
Immediate Medical Attention
Seek medical assistance immediately (for eye contact).
Medical Treatment
Symptomatic treatment.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Alcohol-resistant foam, carbon dioxide, powder, water mist.
Waterjets should not be used, since they can spread the fire.
Firefighter Protection
Wear self-contained breathing apparatus and protective clothing to prevent contact.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Avoid direct contact with spilled substances. Contaminated areas may be slippery.
Avoid discharge to lakes, streams, sewers, etc. In the event of leakage to the surroundings, contact local environmental authorities.
Collect using granular absorbent or similar materials. Cleaning should be performed with normal cleaning agents. Avoid use of solvents.
Materials: granular absorbent or similar materials, sand, earth, vermiculite or diatomaceous earth
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Avoid direct contact with the product.
Containers that have been opened must be carefully resealed and kept upright to prevent leakage. Dry, cool and well ventilated. Protect from sunlight.
Smoking, drinking and consumption of food is not allowed in the work area.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Ensure that eyewash stations and safety showers are located within easy reach. Apply standard precautions during use of the product. Avoid inhalation of vapours.
Nitrile (Glove thickness: 0.4 mm, Breakthrough time: ≥ 480 min, Standards: EN ISO 374, EN ISO 21420:2020); Butyl (Glove thickness: ≥ 0.7 mm, Breakthrough time: ≥ 480 min, Standards: EN ISO 374, EN ISO 21420:2020); Viton (Glove thickness: ≥ 0.7 mm, Breakthrough time: ≥ 480 min, Standards: EN ISO 374, EN ISO 21420:2020)
Face shield alternatively safety glasses with side shields. Standards: EN166
No special when used as intended.
Wear appropriate protection clothing, e.g. coveralls in polypropylene or working clothes in cotton or polyester.
Keep damming materials near the workplace. If possible, collect environmental exposure: spillage during work.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
The product is stable under the conditions, noted in section 7 "Handling and storage".
May react with strong acids and strong oxidising agents.
None known.
Extremes of temperature, Sunlight
Strong oxidizing agents, Strong acids
None under normal conditions. See also Section 5.2.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Dispose of contents/container to an approved waste disposal plant.
Dispose of contents/container to an approved waste disposal plant.
Waste Codes
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
According to REACH Regulation (EC) No 1907/2006, as retained and amended SI 2019/758 and SI 2020/1577
The surfactant(s) contained in this preparation complies(comply) with the biodegradability criteria as laid down in Regulation (EC) No 648/2004 on detergents as retained and amended in UK law.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for UFAPOL SLS 30?
The signal word is danger.
What is the physical form of UFAPOL SLS 30?
UFAPOL SLS 30 is a liquid with yellowish color. It has characteristic odor.
What is UFAPOL SLS 30 used for?
Surfactant for emulsification and polymerisation. Restricted to professional users.
What are the hazard statements for UFAPOL SLS 30?
This substance has 4 hazard statements:
- H302: Harmful if swallowed.
- H315: Causes skin irritation.
- H318: Causes serious eye damage.
- H412: Harmful to aquatic life with long lasting effects.
What is the melting point of UFAPOL SLS 30?
The melting point is No data available and the boiling point is No data available.