Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- PALMERA B1220
- Chemical Name
- Topped Palm Kernel Fatty Acid
Regulatory Identifiers
- CAS Number
- 90990-15-1 Check regulations →
- EC Number
- 292-776-4 Check regulations →
- REACH No.
- Annex V (9) of REACH
Identified Uses
Chemical intermediate, Intermediate, Chemicals for synthesis
Uses advised against
No further relevant information available.
Manufacturers & Suppliers
Palm-Oleo Sdn. Bhd.
manufacturer
Lot 1245, Kundang Industrial Estate 48020 Rawang Selangor Darul Ehsan MALAYSIA
Palm-Oleo (Klang) Sdn. Bhd.
manufacturer
Lot 1 & 2, Solok Waja 3, Bukit Raja Industrial Estate P.O. Box 83, 41710 Klang Selangor Darul Ehsan MALAYSIA
Taiko Palm-Oleo (Zhangjiagang) Co. Ltd
manufacturer
No. 60 Changjiang Road Jiangsu Yangtze River International Chemical Industry Park Zhangjiagang City Jiangsu Province CHINA Post Code: 215633
KLK Emmerich GmbH
manufacturer
Steintor 9, 46446 Emmerich am Rhein GERMANY
+49 (0) 2822 72 0
Emergency Contacts
Palm-Oleo Sdn. Bhd.
+603 6034 4800
Palm-Oleo (Klang) Sdn. Bhd.
+603 3341 2115
Taiko Palm-Oleo (Zhangjiagang) Co. Ltd
+86 512 8259 2028 2866
KLK Emmerich GmbH
+32 3575 5555
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
Manage your Safety Data Sheets
Organize and access chemical safety data with ease
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Fatty acids, C12-18 and C18-unsatd. EC: 292-776-4 | 90990-15-1 | --- | No |
| lauric acid EC: 205-582-1 | 143-07-7 | 40 - 60% | Yes |
| decanoic acid EC: 206-376-4 | 334-48-5 | 1.5% | Yes |
The product is not classified as hazardous to health or environment, according to the CLP regulation. For the wording of the listed hazard phrases refer to section 16.
First Aid Measures
Emergency procedures for chemical exposure incidents
Supply fresh air; consult doctor in case of complaints.
Immediately wash with water and soap and rinse thoroughly.
Rinse opened eye for several minutes under running water. If symptoms persist, consult a doctor.
Rinse out mouth and then drink plenty of water. Do not induce vomiting; call for medical help immediately.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
CO2, powder or water spray. Fight larger fires with water spray. Foam Sand
Water with full jet
No further relevant information available.
Avoid breathing dust/fume/gas/mist/vapours/spray.
Firefighter Protection
In case of insufficient ventilation, wear suitable respiratory equipment.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Wear protective equipment. Keep unprotected persons away. Use respiratory protective device against the effects of fumes/dust/aerosol.
Do not allow to enter sewers/ surface or ground water.
Dispose of the material collected according to regulations. Absorb with liquid-binding material (sand, diatomite, acid binders, universal binders, sawdust).
Materials: liquid-binding material (sand, diatomite, acid binders, universal binders, sawdust)
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Keep away from heat and direct sunlight. Keep respiratory protective device available.
Keep container tightly sealed. Protect from heat and direct sunlight.
Keep ignition sources away - Do not smoke.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
The glove material has to be impermeable and resistant to the product/ the substance/ the preparation. Selection of the glove material on consideration of the penetration times, rates of diffusion and the degradation Material of gloves The selection of the suitable gloves does not only depend on the material, but also on further marks of quality and varies from manufacturer to manufacturer. Penetration time of glove material The exact break through time has to be found out by the manufacturer of the protective gloves and has to be observed.
Safety glasses
Suitable respiratory protective device recommended.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable at environment temperature.
No further relevant information available.
No dangerous reactions known.
See Section 7 for information on safe handling.
See Section 7 for information on safe handling.
Irritant gases/vapours Carbon monoxide and carbon dioxide
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- Not regulated
- Shipping Name
- Not regulated
- Transport Class
- Not regulated
- Packing Group
- Not regulated
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for PALMERA B1220?
The signal word is no signal word.
What is the physical form of PALMERA B1220?
PALMERA B1220 is a liquid appearing as form: liquid, colour: yellowish with yellowish color. It has light odor.
What is PALMERA B1220 used for?
Chemical intermediate, Intermediate, Chemicals for synthesis
What is the melting point of PALMERA B1220?
The melting point is ca. 8 - 25 °C and the boiling point is ca. 200 °C.