Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- PALMERA IS-10
- Chemical Name
- Isostearic Acid
Regulatory Identifiers
- CAS Number
- 30399-84-9 Check regulations →
- EC Number
- 250-178-0 Check regulations →
- REACH No.
- 01-2119493913-27-0003
Identified Uses
Personal care, Lubricant, Coating, Additive for polymers, Chemicals for synthesis, Chemical intermediate, Laboratory chemicals
Manufacturers & Suppliers
KLK Emmerich GmbH
manufacturer
Steintor 9, 46446 Emmerich am Rhein GERMANY
+49 (0) 2822 72 0
KLK Emmerich GmbH
manufacturer
Henkelstr. 67 D-40589 Düesseldorf
+49 (0)2822 720
Emergency Contacts
KLK Emmerich GmbH
+32 3575 5555
KLK Emmerich GmbH
+49 (0)211 797 3350
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
GHS Pictograms
Manage your Safety Data Sheets
Organize and access chemical safety data with ease
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| isostearic acid EC: 250-178-0 | 30399-84-9 | --- | No |
The product is not classified as hazardous to health or environment according to the CLP regulation.
First Aid Measures
Emergency procedures for chemical exposure incidents
Supply fresh air; consult doctor in case of complaints.
Immediately wash with water and soap and rinse thoroughly. If skin irritation continues, consult a doctor.
Rinse opened eye for several minutes under running water. If symptoms persist, consult a doctor.
Do not induce vomiting; call for medical help immediately. Rinse out mouth and then drink plenty of water.
Immediate Medical Attention
No further relevant information available.
Medical Treatment
No further relevant information available.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
CO2, powder or water spray. Fight larger fires with water spray or alcohol resistant foam. Sand
Water with full jet
Carbon dioxide
Avoid breathing dust/fume/gas/mist/vapours/spray.
Firefighter Protection
Wear self-contained respiratory protective device. Wear fully protective suit.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Wear protective equipment. Keep unprotected persons away. Ensure adequate ventilation
Do not allow product to reach sewage system or any water course.
Absorb with liquid-binding material (sand, diatomite, acid binders, universal binders, sawdust). Pick up mechanically.
Materials: liquid-binding material (sand, diatomite, acid binders, universal binders, sawdust)
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Keep away from heat and direct sunlight.
Provide ventilation for receptacles. Store only in the original receptacle. Keep container tightly sealed. Protect from heat and direct sunlight.
Keep ignition sources away - Do not smoke.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
The glove material has to be impermeable and resistant to the product/ the substance/ the preparation. The selection of the suitable gloves does not only depend on the material, but also on further marks of quality and varies from manufacturer to manufacturer. The exact break through time has to be found out by the manufacturer of the protective gloves and has to be observed.
Safety glasses
Use suitable respiratory protective device in case of insufficient ventilation.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable at environment temperature.
No further relevant information available.
Reacts with oxidising agents.
See Section 7 for information on safe handling.
See Section 7 for information on safe handling.
No dangerous decomposition products known.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for PALMERA IS-10?
The signal word is no signal word.
What is the physical form of PALMERA IS-10?
PALMERA IS-10 is a liquid appearing as form: liquid, colour: light yellow, odour: light with light yellow color. It has light odor.
What is the solubility of PALMERA IS-10?
Insoluble.
What is PALMERA IS-10 used for?
Personal care, Lubricant, Coating, Additive for polymers, Chemicals for synthesis, Chemical intermediate, Laboratory chemicals
What is the melting point of PALMERA IS-10?
The melting point is Undetermined. and the boiling point is Undetermined..