NextSDS Logo
Safety Data Sheet EN

PALMERA A9818

CAS 57-11-4
EC 200-313-4

Scan your chemical compliance

Free 10-second scan. Upload a document and check compliance instantly.

Scan Now
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
PALMERA A9818
Chemical Name
Stearic Acid 98 - 100% (Vegetable)

Regulatory Identifiers

CAS Number
57-11-4 Check regulations →
EC Number
200-313-4 Check regulations →
REACH No.
01-2119543894-28-0000

Identified Uses

Additive Skin cosmetics Intermediate Lubricant Laboratory chemicals Tanning agents

Manufacturers & Suppliers

K

KLK Emmerich GmbH

manufacturer

Steintor 9, 46446 Emmerich am Rhein

+49 (0) 2822 72 0

Emergency Contacts

EMEA, London

+44 20 3885 0382

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified no signal word

Hazard Classifications

Not Classified

GHS Pictograms

Manage your Safety Data Sheets

Organize and access chemical safety data with ease

Manage SDS
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type substance
Chemical Name CAS Number Concentration Hazardous
stearic acid EC: 200-313-4 57-11-4 --- No

The product is not classified as hazardous to health or environment, according to the CLP regulation.

04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

Supply fresh air; consult doctor in case of complaints.

Skin contact

Immediately wash with water and soap and rinse thoroughly.

Eye contact

Rinse opened eye for several minutes under running water. If symptoms persist, consult a doctor.

Ingestion

Do not induce vomiting; call for medical help immediately. Rinse out mouth and then drink plenty of water.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

Sand CO2, powder or water spray. Fight larger fires with water spray or alcohol resistant foam. Use fire extinguishing methods suitable to surrounding conditions.

Unsuitable media

Water with full jet

Instructions

Avoid breathing dust/fume/gas/mist/vapours/spray. Fight larger fires with water spray or alcohol resistant foam. Use fire extinguishing methods suitable to surrounding conditions.

Firefighter Protection

In case of insufficient ventilation, wear suitable respiratory equipment.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Emergency procedures

Keep unprotected persons away.

Environmental

Do not allow product to reach sewage system or any water course.

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

Keep away from heat and direct sunlight. Keep ignition sources away - Do not smoke. Keep respiratory protective device available.

Storage

Store only in the original receptacle. Keep container tightly sealed. Protect from heat and direct sunlight.

Fire prevention

Keep ignition sources away - Do not smoke.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

Hands

The glove material has to be impermeable and resistant to the product/ the substance/ the preparation. The selection of the suitable gloves does not only depend on the material, but also on further marks of quality and varies from manufacturer to manufacturer. The exact break through time has to be found out by the manufacturer of the protective gloves and has to be observed.

Eyes

Safety glasses

Respiratory

Suitable respiratory protective device recommended.

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Metal Corrosion
Not applicable
Solubility In Water
< 0.05 g/L
Flash Point
200 °C
Form
Solid
Relative Density
Not determined.
Melting Point
ca. 64.9 - 69.3 °C
Decomposition Temperature
Not determined.
Properties Status
---
Solidification Point
---
Physical State
Solid
Explosive Limits
---
Partition Coefficient
ca. 8.23 log Pow
Vapor Density
Not applicable.
Odor Threshold
Not determined.
Freezing Point
ca. 64.9 - 69.3 °C
Relative Evaporation Rate
---
Voc Content
---
Appearance
Solid
Odor
Light
Colour
White
Evaporation Rate
Not applicable.
Lower Explosive Limit
Not determined.
Upper Explosive Limit
Not determined.
Crystallisation Point
---
Ph
Not determined.
Dynamic Viscosity
ca. 9.87 mPa s
Boiling Point
ca. 383 - 385.8 °C
Solubility
---
Physical State Data
solid
Molecular Weight
---
Solubility In Fat
---
Softening Point
---
Density
0.87 g/cm³
Kinematic Viscosity
ca. 12 mm²/s
Cloud Point
---
Auto Ignition Temperature
ca. 400 °C
Bulk Density
---
Vapor Pressure
ca. 0.00000854 Pa
Flammability
Product is not flammable
Colour Intensity
---
State Under Standard Conditions
---
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Stability

Stable at environment temperature.

Reactivity

No further relevant information available.

Hazardous reactions

Risk of dust explosion if enriched with fine dust in the presence of air.

Avoid

See Section 7 for information on safe handling.

Incompatible

See Section 7 for information on safe handling.

Decomposition

Irritant gases/vapours Carbon monoxide and carbon dioxide

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

The data for this section has not been processed yet.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

UN Number
Not regulated
Shipping Name
Not regulated
Transport Class
Not regulated
Packing Group
Not regulated
15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

The data for this section has not been processed yet.

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for PALMERA A9818?

The signal word is no signal word.

What is the physical form of PALMERA A9818?

PALMERA A9818 is a solid appearing as solid with white color. It has light odor.

What is PALMERA A9818 used for?

Additive Skin cosmetics Intermediate Lubricant Laboratory chemicals Tanning agents

What is the melting point of PALMERA A9818?

The melting point is ca. 64.9 - 69.3 °C and the boiling point is ca. 383 - 385.8 °C.

Compliance Scanner

Scan your compliance