Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- PALMERA A9018
- Chemical Name
- Stearic Acid 90% (Vegetable)
Regulatory Identifiers
- CAS Number
- 57-11-4 Check regulations →
- EC Number
- 200-313-4 Check regulations →
- REACH No.
- 01-2119543894-28-0000
Identified Uses
Additive Biocide Chemical intermediate Tanning agents Lubricant Intermediate Laboratory chemicals
Manufacturers & Suppliers
Palm-Oleo Sdn. Bhd.
manufacturer
Lot 1245, Kundang Industrial Estate, 48020 Rawang, Selangor Darul Ehsan, MALAYSIA
+603 6034 4800
KLK Emmerich GmbH
manufacturer
Steintor 9, 46446, Emmerich am Rhein, GERMANY
+49 (0) 2822 72 0
Emergency Contacts
Palm-Oleo Sdn. Bhd.
+603 6034 4800
KLK Emmerich GmbH - Emmerich an Rhein
+32 3575 5555
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
GHS Pictograms
Still copying SDS data manually?Free
You don't have to. NextSDS reads this SDS and adds the information to your library automatically.
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
Chemical characterization: Substance
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Stearic Acid EC: 200-313-4 | 57-11-4 | --- | No |
The product is not classified as hazardous to health or environment according to the CLP regulation.
First Aid Measures
Emergency procedures for chemical exposure incidents
Supply fresh air; consult doctor in case of complaints.
Immediately wash with water and soap and rinse thoroughly. If skin irritation continues, consult a doctor.
Rinse opened eye for several minutes under running water. If symptoms persist, consult a doctor.
Rinse out mouth and then drink plenty of water. Do not induce vomiting; call for medical help immediately.
Immediate Medical Attention
Call for medical help immediately.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
CO2, powder or water spray. Fight larger fires with water spray. Foam. Sand.
Water with full jet
No further relevant information available.
Avoid breathing dust/fume/gas/mist/vapours/spray.
Firefighter Protection
In case of insufficient ventilation, wear suitable respiratory equipment.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Wear protective equipment. Keep unprotected persons away.
Do not allow product to reach sewage system or any water course.
Absorb with liquid-binding material
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Keep away from heat and direct sunlight.
Keep away from heat and direct sunlight.
Keep ignition sources away - Do not smoke.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
The glove material has to be impermeable and resistant to the product/ the substance/ the preparation. The selection of the suitable gloves does not only depend on the material, but also on further marks of quality and varies from manufacturer to manufacturer. The exact break through time has to be found out by the manufacturer of the protective gloves and has to be observed.
Safety glasses
Suitable respiratory protective device recommended.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable at environment temperature.
No further relevant information available.
Risk of dust explosion. As the product is supplied it is not capable of dust explosion; however enrichment with fine dust causes risk of dust explosion.
No decomposition if used according to specifications.
See Section 7 for information on safe handling.
Irritant gases/vapours, Carbon monoxide and carbon dioxide
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
12.1 Toxicity
12.2 Persistence and degradability
12.3 Bioaccumulative potential
12.4 Mobility in soil
12.5 Results of PBT and vPvB assessment
12.6 Endocrine disrupting properties
12.7 Other adverse effects
12.1 Toxicity
12.2 Persistence and degradability
The substance is easily biodegradable.
12.3 Bioaccumulative potential
The substance does not accumulate in organisms.
12.4 Mobility in soil
12.5 Results of PBT and vPvB assessment
The substance is not considered to be PBT or vPvB.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Must be specially treated adhering to official regulations.
Must be specially treated adhering to official regulations.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
Positive Country Substance Listing for CAS No. 57-11-4
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for PALMERA A9018?
The signal word is no signal word.
What is the physical form of PALMERA A9018?
PALMERA A9018 is a solid with white color. It has light odor.
What is PALMERA A9018 used for?
Additive Biocide Chemical intermediate Tanning agents Lubricant Intermediate Laboratory chemicals
What is the melting point of PALMERA A9018?
The melting point is ca. 64,9 - 69,3 °C and the boiling point is ca. 383 - 385,8 °C (DIN 51751).