Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- PALMERA A9912 AF
- Chemical Name
- Lauric Acid
Regulatory Identifiers
- CAS Number
- 143-07-7 Check regulations →
- EC Number
- 205-582-1 Check regulations →
- REACH No.
- 01-2119538184-40-0000
Identified Uses
Food additive
Manufacturers & Suppliers
KLK Emmerich GmbH
manufacturer
Steintor 9, 46446, Emmerich am Rhein, GERMANY
+49 (0) 2822 72 0
Emergency Contacts
KLK Emmerich GmbH - Emmerich am Rhein
+32 3575 5555
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS05
Hazard Statements
Precautionary Statements
Still copying SDS data manually?Free
You don't have to. NextSDS reads this SDS and adds the information to your library automatically.
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
First Aid Measures
Emergency procedures for chemical exposure incidents
Supply fresh air; consult doctor in case of complaints.
Symptoms: Breathing difficulty, Dizziness, Coughing
Immediately wash with water and soap and rinse thoroughly. If skin irritation continues, consult a doctor.
Rinse opened eye for several minutes under running water. If symptoms persist, consult a doctor.
Rinse out mouth and then drink plenty of water. Do not induce vomiting; call for medical help immediately.
Immediate Medical Attention
Call a doctor immediately.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
CO2, powder or water spray. Fight larger fires with water spray. Sand. Foam.
Water with full jet
Under certain fire conditions, traces of other toxic gases cannot be excluded.
Avoid breathing dust/fume/gas/mist/vapours/spray.
Firefighter Protection
Wear self-contained respiratory protective device. Wear fully protective suit.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Wear protective equipment. Keep unprotected persons away.
Do not allow product to reach sewage system or any water course.
Absorb with liquid-binding material
Materials: sand, diatomite, acid binders, universal binders, sawdust
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Open and handle receptacle with care. Keep away from heat and direct sunlight.
Store in cool, dry place in tightly closed receptacles.
Keep ignition sources away - Do not smoke.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Protective gloves. Avoid direct contact with the chemical/ the product/ the preparation by organisational measures. Use gloves of stable material (e.g. Nitrile) - if necessary tricoted to improve the wearability. The glove material has to be impermeable and resistant to the product/ the substance/ the preparation. Material of gloves: Nitrile rubber, NBR; Chloroprene rubber, CR. The selection of the suitable gloves does not only depend on the material, but also on further marks of quality and varies from manufacturer to manufacturer. Penetration time of glove material: The exact break through time has to be found out by the manufacturer of the protective gloves and has to be observed.
Tightly sealed goggles
Suitable respiratory protective device recommended.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable at environment temperature.
No further relevant information available.
Reacts with oxidising agents.
No decomposition if used according to specifications.
See Section 7 for information on safe handling.
Irritant gases/vapours, Carbon monoxide and carbon dioxide
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
12.5 Results of PBT and vPvB assessment
12.1 Toxicity
12.2 Persistence and degradability
12.3 Bioaccumulative potential
12.4 Mobility in soil
12.6 Endocrine disrupting properties
12.7 Other adverse effects
12.1 Toxicity
12.2 Persistence and degradability
12.3 Bioaccumulative potential
12.3 Bioaccumulative potential
Does not accumulate in organisms.
12.2 Persistence and degradability
12.3 Bioaccumulative potential
12.1 Toxicity
12.2 Persistence and degradability
12.3 Bioaccumulative potential
12.4 Mobility in soil
12.5 Results of PBT and vPvB assessment
12.6 Endocrine disrupting properties
12.7 Other adverse effects
12.5 Results of PBT and vPvB assessment
The substance is not classified as PBT or vPvB.
12.6 Other adverse effects
No further relevant information available.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Must be specially treated adhering to official regulations.
Must be specially treated adhering to official regulations.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for PALMERA A9912 AF?
The signal word is danger.
What is the physical form of PALMERA A9912 AF?
PALMERA A9912 AF is a solid with white color. It has light odor.
What is PALMERA A9912 AF used for?
Food additive
What are the hazard statements for PALMERA A9912 AF?
This substance has 1 hazard statement:
- H318: Causes serious eye damage.
What is the melting point of PALMERA A9912 AF?
The melting point is ca. 42 - 44 °C and the boiling point is ca. 298.9 °C (SRC Database).