Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- ZEP 2000 NEW
- Product Code
- 41640001
Regulatory Identifiers
- CAS Number
- N/A
- UFI Code
- 4TW1-N0VG-EV3K-SHE8
Identified Uses
Sector of Use SU22 Professional uses: Public domain (administration, education, entertainment, services, craftsmen); Product category PC24 Lubricants, greases, release products; Process category PROC11 Non industrial spraying; Application of the substance / the mixture Lubricant
Manufacturers & Suppliers
ZEP ITALIA SRL
manufacturer
Piazzale Luigi Cadorna, 2, 20123 Milano (MI) - Italy; Via Nettunense Km. 25.000, 04011 Aprilia (LT) - Italy
+39.06.926691
http://www.zep.it
ZEP Industries BV
manufacturer
Vierlinghweg 30, 4612 PN Bergen op Zoom, The Netherlands
+31 164 250 100
ZEP UK Ltd
distributor
Tanhouse Lane, Widnes Cheshire, WA8 0RD, United Kingdom
+44 (0)151 422 1000
http://www.zep.co.uk
Emergency Contacts
NHS
+44 0845 46 47
NHS
+44 08454 24 24 24
emergency number (europe)
112
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS02
GHS05
GHS07
GHS09
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
Mixture of substances listed below with nonhazardous additions.
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Hydrocarbons, C6-C7, n-alkanes, isoalkanes, cyclics, <5% n-hexane EC: 921-024-6 | --- | 25 - 50% | Yes |
| propane EC: 200-827-9 | 74-98-6 | 10 - 25% | Yes |
| butane (<0.1% butadine) EC: 203-448-7 | 106-97-8 | 10 - 25% | Yes |
| isobutane (<0.1% butadine) EC: 200-857-2 | 75-28-5 | 2.5 - 5% | Yes |
| calcium dihydroxide EC: 215-137-3 | 1305-62-0 | 1 - 2.5% | Yes |
| Amines, C12-18-(even numbered) and C18-(unsaturated) alkyl EC: 701-068-0 | 2156592-58-2 | 0.1 - 0.25% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
In case of unconsciousness place patient stably in side position for transportation.
If skin irritation continues, consult a doctor. Immediately wash with water and soap and rinse thoroughly. Immediately rinse with water.
Seek immediate medical advice.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
CO2, powder or water spray. Fight larger fires with water spray or alcohol resistant foam.
No further relevant information available.
Firefighter Protection
No special measures required.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Wear protective equipment. Keep unprotected persons away.
Inform respective authorities in case of seepage into water course or sewage system. Do not allow to enter sewers/ surface or ground water.
Dispose contaminated material as waste according to item 13.
Related Products
Similar products with comparable safety profiles
ZEP 40 NEW
UFI: KH2N-Q49N-Y405-E42V
ZEP 45 AERO
UFI: 7J6T-1KST-RT8J-F7MX
ZEP FAST 505 DEGREASER & CLEANER_1GL_4CT
---
ZEP SPRAY MOP REFILL & FLOOR CLEANER_1GL_4CT
---
ZEP FOAMING WALL CLEANER 20N18_12CT
---
ZEP FOAMING COIL CLEANER 20N18 12CT
---
ZEP INSTANT HAND SANITIZER GEL 70% 500ML 12CT
---
POWERZOL™ ZG1185
---
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Keep away from heat and direct sunlight. Ensure good ventilation/exhaustion at the workplace.
Observe official regulations on storing packagings with pressurised containers. Keep receptacle tightly sealed. Protect from heat and direct sunlight.
Keep ignition sources away - Do not smoke.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
No further data; see item 7.
Protective gloves. Material of gloves: The selection of the suitable gloves does not only depend on the material, but also on further marks of quality and varies from manufacturer to manufacturer. As the product is a preparation of several substances, the resistance of the glove material can not be calculated in advance and has therefore to be checked prior to the application. Penetration time of glove material: The exact break through time has to be found out by the manufacturer of the protective gloves and has to be observed. The determined penetration times according to EN 16523-1:2015 are not performed under practical conditions. Therefore a maximum wearing time, which corresponds to 50% of the penetration time, is recommended. Not suitable are gloves made of the following materials: Strong material gloves
Use suitable respiratory protective device only when aerosol or mist is formed. Filter AX Filter A
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
No decomposition if used according to specifications.
No further relevant information available.
No dangerous reactions known.
No further relevant information available.
No further relevant information available.
No dangerous decomposition products known.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- UN1950
- Shipping Name
- AEROSOLS
- Transport Class
- 2.1
- Packing Group
- Void
Warning: Gases.
Warning: Gases.
Warning: Gases.
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for ZEP 2000 NEW?
The signal word is danger.
What is the physical form of ZEP 2000 NEW?
ZEP 2000 NEW is a aerosol with transparent color. It has characteristic odor.
What is ZEP 2000 NEW used for?
Sector of Use SU22 Professional uses: Public domain (administration, education, entertainment, services, craftsmen); Product category PC24 Lubricants, greases, release products; Process category PROC11 Non industrial spraying; Application of the substance / the mixture Lubricant
What are the hazard statements for ZEP 2000 NEW?
This substance has 5 hazard statements:
- H222: Extremely flammable aerosol. Pressurised container: May burst if heated.
- H315: Causes skin irritation.
- H318: Causes serious eye damage.
- H336: May cause drowsiness or dizziness.
- H411: Toxic to aquatic life with long lasting effects.
What is the melting point of ZEP 2000 NEW?
The melting point is Undetermined. and the boiling point is -44 °C.