Tris(hydroxymethyl)aminomethane GR for analysis buffer substance ACS,Reag. Ph Eur

fresh air.

Symptoms: Mucosal irritations, coughing, and dyspnoea

Take off immediately all contaminated clothing. Rinse skin with water/ shower.

Symptoms: irritations

rinse out with plenty of water.

Symptoms: irritations

make victim drink water (two glasses at most). Consult doctor if feeling unwell.

Symptoms: Nausea, Vomiting, Convulsions, Diarrhoea

Water, Foam, Carbon dioxide (CO2), Dry powder

For this substance/mixture no limitations of extinguishing agents are given.

Combustible. Development of hazardous combustion gases or vapours possible in the event of fire.

Suppress (knock down) gases/vapours/mists with a water spray jet.

Avoid inhalation of dusts. Evacuate the danger area, observe emergency procedures, consult an expert.

Do not let product enter drains.

Take up dry. Clean up affected area.

Observe label precautions.

Tightly closed. Dry. Recommended storage temperature see product label.

Change contaminated clothing. Wash hands after working with substance.

Technical measures and appropriate working operations should be given priority over the use of personal protective equipment. See section 7.1.

full contact: Glove material: Nitrile rubber, Glove thickness: 0,11 mm, Break through time: >480 min. splash contact: Glove material: Nitrile rubber, Glove thickness: 0,11 mm, Break through time: >480 min. The protective gloves to be used must comply with the specifications of EC Directive 89/686/EEC and the related standard EN374, for example KCL 741 Dermatril® L (full contact), KCL 741 Dermatril® L (splash contact). The breakthrough times stated above were determined by KCL in laboratory tests acc. to EN374 with samples of the recommended glove types. This recommendation applies only to the product stated in the safety data sheet <(>, <) > supplied by us and for the designated use. When dissolving in or mixing with other substances and under conditions deviating from those stated in EN374 please contact the supplier of CE-approved gloves (e.g. KCL GmbH, D-36124 Eichenzell, Internet: www.kcl.de).

Safety glasses

required when dusts are generated. Recommended Filter type: Filter P 1 (acc. to DIN 3181) for solid particles of inert substances. The entrepreneur has to ensure that maintenance, cleaning and testing of respiratory protective devices are carried out according to the instructions of the producer. These measures have to be properly documented.

Protective clothing needs to be selected specifically for the workplace, depending on concentrations and quantities of the hazardous substances handled. The chemical resistance of the protective equipment should be enquired at the respective supplier.

Do not let product enter drains.

The product is chemically stable under standard ambient conditions (room temperature).

The following applies in general to flammable organic substances and mixtures: in correspondingly fine distribution, when whirled up a dust explosion potential may generally be assumed.

Violent reactions possible with: Oxidizing agents, Bases. Caution! In contact with nitrites, nitrates, nitrous acid possible liberation of nitrosamines!

no information available

no information available

in the event of fire: See section 5.