Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- latex bead solution (SpermMar IgA Latex)
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
clinical diagnostic chemical
Manufacturers & Suppliers
FertiPro N.V.
manufacturer
Industriepark Noord 32, B-8730 Beernem, Belgium
Emergency Contacts
Emergency Contact
32 50 79 18 05
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
GHS Pictograms
GHS07
Hazard Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
First Aid Measures
Emergency procedures for chemical exposure incidents
remove to fresh air.
wash after each contact.
any material that contacts the eye should be washed out immediately with water.
rinse mouth with water, drink 1 - 2 glasses of water.
Immediate Medical Attention
Get medical attention if symptoms persist (inhalation); Get medical attention if symptoms occur (eyes/skin); Seek medical attention (ingestion).
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
not applicable
not applicable
not applicable
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
not applicable
rinse spill area with water
Related Products
Similar products with comparable safety profiles
latex bead solution (SpermMar IgG Latex) + antiserum (SpermMar IgG Antiserum)
---
SpermMar Test IgA
---
SpermMar IgG: Positive and Negative control
---
Salmonella Latex Test
---
PureSperm®100
---
PureSperm® Wash
---
LLG-Desiccant beads 1 to 3 mm orange self-indicating gel
---
LLG-Desiccant beads 1 to 3 mm orange self-indicating gel
---
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
see heading 8.
store at 2-8°C. Do not freeze before use. Keep away from sunlight. Do not use after expiry date.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
good ventilation* should be sufficient. Supplementary ventilation or respiratory protection may be needed in special circumstances. * Typically 10 room volumes per hour is considered good general ventilation: ventilation rates should be matched to conditions of use.
Wear rubber gloves.
wear chemical safety goggles.
Supplementary ventilation or respiratory protection may be needed in special circumstances
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
stable
will not occur
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for latex bead solution (SpermMar IgA Latex)?
The signal word is warning.
What is the physical form of latex bead solution (SpermMar IgA Latex)?
latex bead solution (SpermMar IgA Latex) is a liquid appearing as liquid - odourless . It has odourless odor.
What is latex bead solution (SpermMar IgA Latex) used for?
clinical diagnostic chemical
What are the hazard statements for latex bead solution (SpermMar IgA Latex)?
This substance has 3 hazard statements:
- H302: May be harmful by ingestion.
- H315: May cause skin or eye irritation.
- H335: May be irritating to mucous membranes and upper respiratory tract.