Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- latex bead solution (SpermMar IgG Latex) + antiserum (SpermMar IgG Antiserum)
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
clinical diagnostic chemical
Manufacturers & Suppliers
FertiPro N.V.
manufacturer
Industriepark Noord 32 B-8730 Beernem Belgium
Emergency Contacts
Emergency Contact
32 50 79 18 05
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
GHS Pictograms
GHS06
Hazard Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Water | 7732-18-5 | 98% | No |
| Glycine | 56-40-6 | 1% | No |
| Sodium Azide | 26628-22-8 | 0.09% | No |
| Polystyrene latex particles coated with human protein | 9003-53-6 | 1% | No |
| Sodium Chloride | 7647-14-5 | 1% | No |
| Sodium Hydroxide | 1310-73-2 | 1% | No |
| Bovine Serum Albumin | 9048-46-8 | 0.1% | No |
| Rabbit protein | --- | 2% | No |
First Aid Measures
Emergency procedures for chemical exposure incidents
Remove to fresh air.
Wash after each contact.
Wash out immediately with water.
Rinse mouth with water, drink 1 - 2 glasses of water.
Immediate Medical Attention
Get medical attention if symptoms persist (inhalation), if symptoms occur (eyes/skin), or seek medical attention (ingestion).
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
not applicable
not applicable
not applicable
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Flush to sewer with large amounts of water
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Store at 2–8°C.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
good ventilation* should be sufficient. Supplementary ventilation or respiratory protection may be needed in special circumstances. * Typically 10 room volumes per hour is considered good general ventilation: ventilation rates should be matched to conditions of use.
If prolonged or repeated skin contact is necessary, impervious gloves or other protection may be required.
safety glasses with side shields are recommended in industrial operations involving chemicals.
Supplementary ventilation or respiratory protection may be needed in special circumstances
If prolonged or repeated skin contact is necessary, impervious gloves or other protection may be required.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
stable
will not occur
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for latex bead solution (SpermMar IgG Latex) + antiserum (SpermMar IgG Antiserum)?
The signal word is danger.
What is the physical form of latex bead solution (SpermMar IgG Latex) + antiserum (SpermMar IgG Antiserum)?
latex bead solution (SpermMar IgG Latex) + antiserum (SpermMar IgG Antiserum) is a liquid appearing as liquid - odourless . It has odourless odor.
What is latex bead solution (SpermMar IgG Latex) + antiserum (SpermMar IgG Antiserum) used for?
clinical diagnostic chemical
What are the hazard statements for latex bead solution (SpermMar IgG Latex) + antiserum (SpermMar IgG Antiserum)?
This substance has 4 hazard statements:
- H300: Sodium azide : very toxic if swallowed. Contacts with acids liberate very toxic gas
- H302: May be harmful by ingestion.
- H316: May cause skin or eye irritation.
- H335: May be irritating to mucous membranes and upper respiratory tract.