Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- NucleoSpin Gel and PCR Clean-up (50)
- Product Code
- 740609.50
Regulatory Identifiers
- CAS Number
- N/A
- REACH No.
- A registration number for the substance(s) does not exist because the annual tonnage does not require registration or the substance or its use is excluded from registration.
- UFI Code
- N5XV-533V-Y202-95TW
Identified Uses
Product for analytical use. Exposure Scenario Classification according REACH, RIP 3.2 Codes: SU 0-2, PC 21, PROC 15, AC 0 The exposure scenario is integrated into sections 1-16.
Uses advised against
not described
Manufacturers & Suppliers
MACHEREY-NAGEL GmbH & Co. KG
manufacturer
Valenciennen Str. 11, 52355 Duren, Germany
+49 2421 969 0
Emergency Contacts
Gemeinsames Giftinformationszentrum (GGIZ)
+49 361 730 730
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS05
GHS07
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
Mixture containing guanidinium thiocyanate, indicator dyes, and other chemicals, with water added to 100%.
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| guanidinium thiocyanate EC: 209-812-1 | 593-84-0 | 30 - 45% | Yes |
| indicator dye(s) | --- | 0.1% | No |
| chemicals/mixture until 1% | --- | 0.1 - 1% | No |
| water | 7732-18-5 | --- | No |
When not listed, mixtures are added with water [CAS No. 7732-18-5] to 100%.
First Aid Measures
Emergency procedures for chemical exposure incidents
After inhalation of foam or vapour fresh air should be inhaled. Keep airways free. If vomiting and if insensible place patient in recovery position and keep airways free.
Remove contaminated clothing immediately. Rinse the affected skin or mucous membrane thoroughly for min. 15 minutes under running water. (If possible) use soap. Avoid neutralisation. Then apply a loose bandage.
Symptoms: Rapid penetration and destruction of the skin. Especially in the heated form. Causes severe skin burns.
After contact with the eyes rinse thoroughly under running water with the eyelid wide open for min. 10 minutes with eye washing bottle, eye douche or running water (protect intact eye). Before (if possible) apply eye drops Proxymetacaine 0.5%, if the opening the eyelid convulsion is painful. Further treatment to be carried out by an eye specialist.
Symptoms: Causes severe eye damage.
After oral intake lots of water with activated charcoal supplement should be drunk after it has been ingested. Do not induce vomiting under any circumstances. Do not make any efforts to neutralise it. Contact medical advice for possible consequences.
Immediate Medical Attention
Further treatment must to be carried out by an eye specialist.
Medical Treatment
Apply glucocorticosteroides following inflammatory reactions. Name the corrosive chemical. Administer a prophylaxis to counter pulmonary oedema following the INGESTION of corrosive aerosols.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
FOAM, WATER SPRAY, DRY POWDER, CARBON DIOXIDE
Formation of hazardous and caustic vapour-air mixtures possible.
Spray any vapours released with water. Retent fire water.
Firefighter Protection
Use only acid-resistant safety equipment. For great amount - if necessary - protective breathing apparatus which is independent of the ambient air (isolated equipment), and sealed protective clothing is necessary in the event of a large-scale formation of toxic substances.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Regular staff training is necessary, indicating hazards and precautions on the basis of operating instructions. Restrictions on activity must be observed.
Collect small amounts of leaked liquid and flush with water into drains.
Should not be released into the environment.
Clean any contaminated equipment and floors with plenty of water.
Related Products
Similar products with comparable safety profiles
NucleoSpin Gel and PCR Clean-up (50)
UFI: N5XV-533V-Y202-95TW
NucleoSpin DNA RapidLyse (50)
UFI: TTWV-43C9-R202-NTGN, D0HW-E3PF-P200-V61A, GXGW-X302-C20G-6UF8
NucleoSpin RNA (50)
---
NucleoSpin Plant II (50)
UFI: 60EV-03C8-D201-X08S, MMPT-631A-V206-GNTN, WWJV-U3PV-U207-MFGF
NucleoSpin Blood (50)
UFI: S0KV-C3D9-420Q-9T2H, JN8V-6350-R20S-6KJG, MMPT-631A-V206-GNTN
NucleoSpin DNA Insect (50)
UFI: TTWV-43C9-R202-NTGN, RV7W-C33R-J20Y-1RP6, MMPT-631A-V206-GNTN
Proteinase K,recomb.,PCR Grd.Sol.,1.25ml
---
GelRed Nucleic Acid Stain, 10,000X in water
---
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Handling in accordance with the test instruction, that comes with the product.
Safe storage is guaranteed in the original packaging from MACHEREY-NAGEL. Keep original product packages tightly closed during handling and storage.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Good ventilation and extraction system in the room, floor resistant to chemicals with floor drainage and washing facilities.
Yes, gloves according EN 374 (permeation time >30 min - level 2), consist of PVC, natural latex, Neopren, or Nitril (f.ex. from Ansell or KCL). Use for short times chemical resistant latex gloves with code EN 374-3 level 1.
Yes, safety glasses according EN 166 with integrated side shields or wrap-around protection or face protection.
No additional recommendations.
Recommended to avoid clothing damage, and to avoid contamination with these hazards.
Do not release product into environment.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
no known instability.
no further data available.
Can react violently with organic material. Note: Can form very reactive substances with oxidizing agents. Possible: &H:EUH031& No further data available.
No more required.
no additional data available
Decompositions are not observed during the expiration period under recommended conditions.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for NucleoSpin Gel and PCR Clean-up (50)?
The signal word is danger.
What is the physical form of NucleoSpin Gel and PCR Clean-up (50)?
NucleoSpin Gel and PCR Clean-up (50) is a liquid with blue, colourless color. It has acetic, odorless odor.
What is NucleoSpin Gel and PCR Clean-up (50) used for?
Product for analytical use. Exposure Scenario Classification according REACH, RIP 3.2 Codes: SU 0-2, PC 21, PROC 15, AC 0 The exposure scenario is integrated into sections 1-16.
What are the hazard statements for NucleoSpin Gel and PCR Clean-up (50)?
This substance has 1 hazard statement:
- H314: Causes severe skin burns and eye damage.
What is the melting point of NucleoSpin Gel and PCR Clean-up (50)?
The melting point is no data available and the boiling point is no data available.