KODAK RP X-OMAT LO Fixer and Replenisher, Part B

If symptomatic, move to fresh air. Get medical attention if symptoms occur.

Immediately flush with plenty of water for at least 15 minutes and wash using soap. Get medical attention if symptoms occur.

In case of contact with eyes, flush immediately with plenty of water and seek medical attention.

Do NOT induce vomiting. Give victim a glass of water. Get medical attention immediately. Never give anything by mouth to an unconscious person.

Use appropriate agent for adjacent fire.

Refer to protective measures listed in sections 7 and 8.

Contaminated absorbent should be disposed of in accordance with local regulations.

Absorb spill with vermiculite or other inert absorbant material such as sand or earth, then place in a suitable container for proper disposal. Clean surface thoroughly with water to remove residual contamination.

Materials: vermiculite or other inert absorbant material such as sand or earth

Avoid prolonged or repeated breathing of mist or vapour. Avoid contact with eyes, skin, and clothing. Use only with adequate ventilation. Wash thoroughly after handling. Do not eat, drink or smoke when using this product.

Cool conditions (5 - 30°C). Keep container tightly closed. Keep away from incompatible substances (see Incompatibility section.)

Wash thoroughly after handling. Do not eat, drink or smoke when using this product.

No special precautionary measures should be needed under anticipated conditions of use.

Avoid exposure to mists and vapours by mixing solutions in closed vessels and/or under local exhaust ventilation. Good general ventilation (typically 10 air changes per hour) should be used. Ventilation rates should be matched to conditions.

Using the information provided in Section 2, seek the advice of the glove supplier as to the most suitable glove material. Avoid skin contact when mixing or handling the substance/preparation or a mixture by wearing impervious gloves and protective clothing appropriate to the risk of exposure. Use chemical resistant gloves. In case of prolonged immersion or frequently repeated contact: Nitrile rubber (>= 0.38 mm, > 480 min), Neoprene (>= 0.65 mm, > 240 min), butyl-rubber (>= 0.36 mm, > 480 min). Avoid natural rubber gloves. The protective gloves to be used must comply with the specifications of the EC directive 89/686/EEC and the resultant standard EN 374. This recommendation applies only to the product stated in the Safety Data Sheet and supplied by us as well as to the purpose specified by us.

Wear safety glasses with side shields or protective goggles whenever mixing or handling solutions.

None should be needed under normal conditions of use.

Avoid skin contact when mixing or handling the substance/preparation or a mixture by wearing impervious gloves and protective clothing appropriate to the risk of exposure.

Stable under normal conditions.

No data available

Hazardous polymerisation does not occur.

No data available

Metals.

Sulphur oxides, aluminum oxides. Exposure to temperatures in excess of 180°C may liberate hazardous decomposition products including oxides of carbon, nitrogen and sulphur.