KODAK RP X-OMAT LO Fixer and Replenisher, Part A

IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for breathing.

IF ON SKIN: Wash with plenty of soap and water.

IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.

Give victim a glass of water.

Use appropriate agent for adjacent fire.

Dried product residue can act as a reducing agent.

Refer to protective measures listed in sections 7 and 8.

Contaminated absorbent should be disposed of in accordance with local regulations.

Absorb spill with vermiculite or other inert absorbant material such as sand or earth, then place in a suitable container for proper disposal. Clean surface thoroughly with water to remove residual contamination.

Materials: vermiculite or other inert absorbant material such as sand or earth

Avoid breathing mist or vapour. Avoid contact with eyes, skin, and clothing. Use with adequate ventilation. Wash thoroughly after handling.

Cool conditions (5 - 30°C). Keep container tightly closed to prevent the loss of water.

Wash thoroughly after handling.

Keep from contact with oxidizing materials.

Avoid exposure to mists and vapours by mixing solutions in closed vessels and/or under local exhaust ventilation. Good general ventilation (typically 10 air changes per hour) should be used. Ventilation rates should be matched to conditions.

Using the information provided in Section 2, seek the advice of the glove supplier as to the most suitable glove material. Avoid skin contact when mixing or handling the substance/preparation or a mixture by wearing impervious gloves and protective clothing appropriate to the risk of exposure. Use chemical resistant gloves. In case of prolonged immersion or frequently repeated contact: Consult your glove manufacturer. Consult your glove manufacturer for advice on what glove material to avoid. The protective gloves to be used must comply with the specifications of the EC directive 89/686/EEC and the resultant standard EN 374. This recommendation applies only to the product stated in the Safety Data Sheet and supplied by us as well as to the purpose specified by us.

Wear safety glasses with side shields or protective goggles whenever mixing or handling solutions.

In case of insufficient ventilation, wear personal respiratory protection designed to protect against both aerosols and acid gas.

Avoid skin contact when mixing or handling the substance/preparation or a mixture by wearing impervious gloves and protective clothing appropriate to the risk of exposure.

No information available.

Stable under normal conditions.

No data available

Hazardous polymerisation does not occur.

No data available

Acids, Strong bases, sodium hypochlorite (bleach), Halogenated compounds, Oxidizing agents. Contact with strong acids may liberate sulphur dioxide. Contact with strong bases may liberate ammonia. Contact with sodium hypochlorite (bleach) may liberate hazardous materials.

Carbon oxides, Ammonia, chloramine, Sulphur oxides, Nitrogen oxides (NOx)