TB-21ND WELD CLEANING FLUID FOR STAINLESS STEEL (UK)

If inhaled, remove from contaminated area. Apply artificial respiration if not breathing.

If skin or hair contact occurs, remove contaminated clothing and flush skin and hair with running water.

Symptoms: Irritating to the skin

If in eyes, hold eyelids apart and flush continuously with running water. Continue flushing until advised to stop by a Poisons Information Centre, a doctor, or for at least 15 minutes.

Symptoms: Irritating to the eyes

For advice, contact a Poison Information Centre or a doctor (at once). If swallowed, do not induce vomiting.

Use an extinguishing agent suitable for the surrounding fire.

Non flammable. May evolve toxic gases (phosphorus oxides) when heated to decomposition. Contact with most metals may evolve flammable hydrogen gas.

Treat as per requirements for surrounding fires. Use waterfog to cool intact containers and nearby storage areas.

Wear Personal Protective Equipment (PPE) as detailed in section 8 of the SDS. Clear area of all unprotected personnel. Ventilate area where possible. Contact emergency services where appropriate.

Prevent product from entering drains and waterways.

cover / absorb spill with sodium bicarbonate or 50-50 mixture of sodium carbonate and calcium hydroxide. Collect for complete neutralisation and appropriate disposal.

Materials: sodium bicarbonate or 50-50 mixture of sodium carbonate and calcium hydroxide

Before use carefully read the product label. Use of safe work practices are recommended to avoid eye or skin contact and inhalation. This solution should not be used in a spraying application.

Store in a cool, dry, well ventilated area, removed from incompatible substances and foodstuffs.

Observe good personal hygiene, including washing hands before eating. Prohibit eating, drinking and smoking in contaminated areas.

Avoid inhalation. Use in well ventilated areas. Where an inhalation risk exists, mechanical extraction ventilation is recommended. Maintain vapour levels below the recommended exposure standard.

Wear PVC or rubber gloves.

Wear splash-proof goggles.

Where an inhalation risk exists, wear a Type B (Inorganic gases and vapours) respirator. If spraying, with prolonged use, or if in confined areas, wear an Air-line respirator.

Wear coveralls.

Stable under recommended conditions of storage.

Polymerization is not expected to occur.

Avoid heat, sparks, open flames and other ignition sources.

Incompatible with oxidising agents (e.g. hypochlorites), alkalis (e.g. sodium hydroxide) and metals.

May evolve toxic gases (phosphorus oxides) when heated to decomposition.